Toyota 4Runner SR5 Sport Utility 4D buyer's guide
Toyota 4Runner SR5 Sport Utility 4D -- the model's own buyer's guide: variants, values and what to check.
Years listed: 1986-2005 ยท Series: 4Runner
Overview and history
The 4Runner is the longest-running argument in the Toyota range: that a proper off-road wagon should be built like a truck, on a separate ladder frame, with a live rear axle, low-range gearing and engines chosen for durability rather than fashion. Toyota has now built six generations of it since 1984, and through every one of them โ even as rivals went unibody, went soft and eventually went away โ the 4Runner stayed body-on-frame. That single decision explains both why these trucks are still working vehicles at thirty years old and why the used market treats them the way it does. You are not buying a crossover with a famous badge. You are buying a Hilux-derived truck with a wagon body, and you should inspect it like one.
The idea started with the Toyota Trekker of 1981โ83, a conversion by Winnebago that turned the Toyota pickup into a small wagon with a fibreglass rear canopy and a rear seat. Toyota liked the result enough to do it properly. The first 4Runner, launched for 1984, was exactly that formula executed in-house: a short-wheelbase Hilux pickup chassis, a removable fibreglass top over the rear, two doors and a fold-down tailgate. It was crude, charming and genuinely capable, with a solid front axle for its first two years. From there the line walks steadily toward civilisation without ever surrendering the plot: independent front suspension from 1986, four doors from 1990, a proper steel wagon body, bigger engines, and by the fourth generation a V8 option and full-time four-wheel drive. The fifth generation, sold from 2010 to 2024, is the one most buyers picture today โ big, upright, unapologetically old-school โ and the sixth generation for 2025 finally moved to turbocharged four-cylinder and hybrid power on the TNGA-F platform it shares with the Land Cruiser.
This guide covers the generations as a single buying problem, because that is how the market presents them. The listings pool behind this site is instructive: it is dominated by third-generation trucks of 1996โ2002 and early fourth-generation trucks of 2003โ05, with a long tail back through the second generation to a handful of first-generation survivors. That spread is not an accident. The third generation is the sweet spot of size, simplicity and parts support; the fourth is the value play; the first two generations are now enthusiast vehicles, bought for character as much as utility. What all of them share is a reputation for mechanical longevity that is broadly earned โ and one weakness that is just as consistent, and that this guide will return to until you are tired of hearing it: the frames rust. The engines outlast the chassis. Almost every buying decision on a used 4Runner reduces to how much frame the previous owners' climate has left you.
A second shared trait is worth naming up front. These trucks were sold in enormous numbers to people who used them โ ski trips, boat ramps, construction sites, teenage first cars, overland builds. High mileage is normal and, on its own, not a warning sign: a 220,000-mile truck with records is a better buy than a 130,000-mile truck with none. What you are really shopping for is maintenance evidence and frame condition, in that order, and then specification. Get those three right and a 4Runner is one of the most dependable used purchases in the whole market. Get the frame wrong and no engine reputation will save you.
The models
Four generations matter to the classic and used buyer, plus the modern fifth generation that anchors the top of the market. Read the table first, then the notes โ because within each generation the trim walk from SR5 to Limited changes the transfer case, the suspension and the interior in ways that matter more than the badge suggests.
| Model | Years | Engine | Output | Built | Character |
|---|---|---|---|---|---|
| 4Runner (1st gen, N60) | 1984โ1989 | 2.4 four (22R / 22R-E), 2.4 turbo (22R-TE), 3.0 V6 (3VZ-E) | 96โ150 hp | Not reliably published | Removable-top original; solid axle to 1985, IFS after |
| 4Runner (2nd gen, N120/N130) | 1990โ1995 | 2.4 four (22R-E), 3.0 V6 (3VZ-E) | 116โ150 hp | Not reliably published | First four-door; the V6 carries the head-gasket story |
| 4Runner (3rd gen, N180) | 1996โ2002 | 2.7 four (3RZ-FE), 3.4 V6 (5VZ-FE) | 150โ183 hp | Not reliably published | The sweet spot; right-sized, simple, huge support |
| 4Runner (4th gen, N210) | 2003โ2009 | 4.0 V6 (1GR-FE), 4.7 V8 (2UZ-FE) | 236โ270 hp | Not reliably published | Bigger and faster; V8 full-time 4WD; frame rust decides all |
| 4Runner (5th gen, N280) | 2010โ2024 | 4.0 V6 (1GR-FE) | 270 hp | Not reliably published | The modern classic-in-waiting; TRD Pro is the collector trim |
| 4Runner (6th gen, N285) | 2025โ | 2.4 turbo four, 2.4 turbo hybrid | 278โ326 hp | Current production | New platform, new powertrains; too new to judge as a used buy |
(Production totals by generation are not published by Toyota in a form we can stand behind, so the table says so rather than inventing figures. Outputs are period ratings for US-market trucks.)

First generation (1984โ89). Two doors, a removable fibreglass rear top, a tailgate with a power rear window, and โ for 1984 and 1985 only โ a solid front axle on leaf springs, which is why those two years are the off-road world's favourites and priced like it. From 1986 the front end went independent, the 22R-E fuel-injected four became the standard engine, and a turbocharged 22R-TE appeared briefly. The 3.0-litre 3VZ-E V6 arrived for 1988 and brought the model's defining early fault with it (see Engines). Today a first-generation truck is a hobby vehicle: wonderful, simple and increasingly hard to find unmodified and unrotted.
Second generation (1990โ95). The 4Runner became a proper four-door wagon โ a two-door was offered early on and is now rare โ on a longer wheelbase, with coil springs at the rear in place of leaves. Most US trucks carry the 3VZ-E V6 and an automatic; the 22R-E four with a manual gearbox is the connoisseur's survival pick, slow and nearly unkillable. SR5 trim brought the better seats, gauges and trim; there was no Limited yet in spirit, though well-optioned SR5s approach it. Treat every second-generation V6 as a head-gasket candidate until paperwork proves otherwise.
Third generation (1996โ2002). The generation that made the 4Runner's modern reputation. Slightly larger, much better finished, with dual airbags, available ABS and a proper range structure: base, SR5 and Limited. Engines were the 3RZ-FE 2.7 four and, in the great majority of trucks, the 5VZ-FE 3.4 V6 โ one of the most durable engines Toyota has ever sold. Four-wheel-drive SR5s use a part-time transfer case, with a multi-mode case (which adds an all-wheel-drive mode) on later SR5s and Limiteds; a factory rear differential lock was optional on some years and is the single most sought-after option in the whole generation. A dealer-installed TRD supercharger was offered for the 3.4 and turns up on enthusiast trucks. This is the generation the off-road aftermarket adopted wholesale, which cuts both ways: support is superb, and so is the supply of lifted, cut and trail-worn examples.

Fourth generation (2003โ09). Bigger in every dimension, on a frame shared with the Land Cruiser Prado line, and the first 4Runner with a V8: the 2UZ-FE 4.7, sold only with full-time four-wheel drive and a Torsen centre differential. The 1GR-FE 4.0 V6 is the volume engine. Trims run SR5, Sport Edition (with the X-REAS linked shock absorber system on many trucks) and Limited. A third-row seat was optional and is best thought of as occasional. This generation drives the most like a modern SUV and tows the most โ the V8 is rated to tow up to 7,000 lb in two-wheel-drive form โ and it is also the generation where frame rust reaches its peak severity. More on that below; it cannot be said too often.

Fifth generation (2010โ24). One engine โ the 1GR-FE 4.0 V6, updated with dual VVT-i โ one five-speed automatic, and a range that gradually reorganised itself around off-road trims: Trail, then TRD Off-Road, and from 2015 the TRD Pro, with its lifted suspension, special wheels and launch-year colours that collectors now chase. A facelift for 2014 sharpened the face without changing the substance. KDSS, the hydraulic anti-roll bar disconnect system, was optional on Trail and TRD Off-Road trucks and is the specification item to understand before you buy (see Problem areas). These trucks held their value so stubbornly through the 2010s that used prices stayed close to new for years at a time.
Sixth generation (2025โ ). A clean-sheet truck on the TNGA-F frame, with a 2.4-litre turbo four in standard and i-FORCE MAX hybrid forms and an eight-speed automatic. It is too new to have a used-market character, and nothing in this guide's older-truck inspection logic should be assumed to transfer to it beyond the oldest rule of all: look at the frame, read the records, and distrust any truck whose story is only a story.
Engines and gearboxes
The fours: 22R, 22R-E, 22R-TE and 3RZ-FE
The 22R family is the engine the 4Runner legend was built on, and its reputation is deserved โ with one maintenance condition attached. These are 2.4-litre, single-overhead-cam, chain-driven fours: carburetted as the 22R, fuel-injected as the 22R-E (the one you want), and turbocharged as the short-lived 22R-TE of 1986โ88, which made about 135 hp and is now a rarity that off-roaders hunt. Power is modest in every version. What the design gives you instead is a bottom end that tolerates neglect better than almost anything else in this guide.
The condition is the timing chain. The 22R uses a single-row chain running in plastic guides, and as the guides wear โ typically well past 100,000 miles โ the chain begins to slap against the timing cover at start-up, audibly, for the first seconds after a cold start. Ignore it long enough and the chain saws through the cover into a water passage, at which point coolant and oil mix and a cheap guide job becomes an engine job. The test is your ears: a brief rattle on cold start that vanishes is a warning to budget; a rattle that persists, or any sign of coolant in the oil, is a walk-away-or-price-it-in moment. A timing chain and guide kit fitted runs roughly $700โ1,400 in parts and labour at an independent shop, and sellers who have done it keep the invoice, because everyone in this market knows the story. The 3RZ-FE 2.7 that replaced the 22R-E in the third generation is a different, twin-cam design with a far better chain arrangement and a balancer shaft; it is slower than the 3.4 V6 it sold alongside, thirstier than you would expect for its output, and almost completely trouble-free. Buy it for simplicity, not pace.
The sixes: 3VZ-E, 5VZ-FE and 1GR-FE
Three V6s carry the middle forty years of the model, and they are not alike at all.
The 3VZ-E 3.0 (1988โ95) is the engine to approach with your eyes open. It is a single-overhead-cam design that runs hot in the 4Runner's engine bay, and its head gaskets are the model's most famous failure: the gaskets deteriorate, exhaust gas breaches into the cooling system, and the truck begins to use coolant, run warm and eventually overheat. Toyota ran a special service campaign on these engines for years, replacing gaskets with an improved design, which means two things for a buyer. First, ask directly whether the campaign work or a later gasket job is documented โ a truck with the improved gaskets fitted properly can be entirely sound. Second, test what you are told: a cold engine that pressurises its top radiator hose within a minute of starting, bubbles in the coolant reservoir, or a sweet smell and white vapour from the exhaust on a warm engine are all breach symptoms. A head-gasket job done properly, with the heads checked and skimmed as needed, runs roughly $1,800โ3,000; done cheaply, it comes back. Power is 150 hp on a good day, economy is poor, and the honest verdict is that the 3VZ-E is the weakest engine ever fitted to a 4Runner โ buyable with proof, dangerous without it.
The 5VZ-FE 3.4 (1996โ2002) is the opposite case: the engine most third-generation owners will defend in an argument. It is a dual-overhead-cam, iron-block V6 making 183 hp, and its failure list is short enough to recite. It uses a timing belt, not a chain, on a 90,000-mile replacement interval โ and it is a non-interference design, so a snapped belt strands you but does not bend valves, which is why so many of these trucks survived owners who never changed it. Change it anyway, with the water pump, tensioners and cam and crank seals while the front of the engine is open: the full job runs roughly $900โ1,600 and resets the clock for another 90,000 miles. Valve cover gaskets weep with age and drip onto the exhaust manifolds, which smells worse than it is; a set fitted is roughly $400โ700. Exhaust manifolds crack on some trucks, announced by a ticking on cold start that fades as the manifold expands and seals itself. The starter's solenoid contacts wear and produce the classic single click and no crank, cured with a contact kit for a fraction of a replacement starter's cost. That is nearly the whole list. The TRD supercharger, a dealer-fit Eaton unit, adds roughly 70 hp and a whine owners love; on a supercharged truck, ask about fuel upgrades and ping โ the kit really wants the additional injector and fuel management fitted, and a truck that detonates under boost is spending its head gaskets.
The 1GR-FE 4.0 (2003โ24) powered two generations and is the modern default. In fourth-generation form it makes 236โ245 hp with single VVT-i; the fifth generation's dual VVT-i version makes 270 hp. It is chain-driven, with no belt interval to chase, and its known items are maintenance-shaped rather than fatal: timing chain stretch on very high-mileage or oil-neglected engines, announced by rattle and eventually by cam timing codes; water pumps that weep at the tell-tale hole; and, on early fourth-generation trucks, head-gasket seepage at the rear of the heads on some engines โ check for dried coolant crust at the back of the block and any history of unexplained coolant loss. An oil-change history you can read is worth more on this engine than any single test: the 1GR rewards 5,000-mile oil and punishes 15,000-mile oil, slowly and then all at once.
The V8: 2UZ-FE 4.7
The fourth generation's V8 is the Land Cruiser and Tundra engine: an iron-block, dual-overhead-cam 4.7 making 260โ270 hp depending on year, with VVT-i added for 2005. It is smooth, torquey and famously long-lived, and it brings the generation's best drivetrain with it โ full-time four-wheel drive with a lockable Torsen centre differential, so there is no mode to choose wrongly on a wet road. Its service signature is the timing belt: a 90,000-mile interval, and unlike the 5VZ this is an interference engine, so a failed belt means bent valves and a bill that starts around $3,500 and climbs. Buy on the belt sticker and the invoice, not on the seller's memory โ the sticker lives under the hood or on the timing cover, and its absence on a 150,000-mile truck means you should price the full belt, water pump, tensioner and seal job (roughly $1,100โ1,800) into your offer on the spot. Secondary air injection pumps and valves on the VVT-i version can fail and light the dashboard; the parts and labour run roughly $600โ1,400, and bypass kits exist in the aftermarket precisely because the job is common enough to have a workaround. Exhaust manifold cracks tick when cold, as on the 5VZ. None of this dents the verdict: a documented 2UZ is the strongest engine ever fitted to a 4Runner, and the trucks carrying it are bought by people who know it.

Gearboxes and four-wheel drive
The manual gearbox story is short and happy. Five-speed manuals โ the R150F behind the V6s, lighter units behind the fours โ were common on first- and second-generation trucks, available on early third-generation trucks, and gone after 2000. They are strong, their synchromesh wears honestly (second gear complains first), and a manual truck today is an enthusiast purchase that usually commands a premium over the automatic it undercut when new. Clutch replacement runs roughly $900โ1,500 fitted. If you want one, buy the best one you can find; the supply only shrinks.
Automatics do most of the work in this market, and Toyota's are good. The early A340 family four-speeds (behind the 3VZ-E and 5VZ-FE) are durable units whose enemies are heat and old fluid, not design. The fifth-generation's five-speed automatic is similarly untemperamental. The one automatic fault that deserves its own paragraph is not in the gearbox at all โ it is in the radiator, and it belongs to the third generation especially. The automatic transmission cooler lives inside the radiator's bottom tank; when the radiator corrodes internally, engine coolant and transmission fluid mix, producing the pink, frothy contamination owners call the strawberry milkshake. Caught at the first sign โ pink residue in the coolant reservoir, slipping or flaring shifts โ a radiator and a full fluid exchange can save the gearbox. Driven on, the mixture destroys the clutch packs and the gearbox needs a rebuild at roughly $2,500โ4,500. The prevention is a radiator on age and mileage, roughly $300โ600 fitted, or an external cooler. On any third-generation automatic, pull the transmission dipstick and look at the coolant reservoir before you do anything else on the viewing. This single check is worth more than the rest of the test drive.
Transfer cases define how each generation behaves off-road and on a slippery road. First- and second-generation trucks use a part-time case: two-wheel drive on dry pavement, always, because running part-time four-wheel drive on a grippy surface winds up the drivetrain and damages it โ a seller demonstrating 4WD on dry tarmac is demonstrating something else about themselves. Third-generation SR5s are part-time too, but Limiteds and later SR5s offered the multi-mode case, which adds a centre differential and an all-wheel-drive setting safe on any surface; know which case the truck in front of you has, because it changes both use and value. Fourth-generation V6 trucks are multi-mode; V8 trucks are full-time. Fifth-generation SR5 and Limited trucks split again โ part-time for SR5, full-time for Limited โ while TRD Off-Road and TRD Pro trucks are part-time with a locking rear differential, Crawl Control and terrain modes on later years. Across all generations, the actuators that engage the front differential and the transfer case modes are electric or vacuum devices that fail from disuse: a truck whose 4WD has not been engaged in five years may not engage on your test drive. Cycle every mode, including low range and any locker, on every viewing. Actuator replacement runs roughly $500โ1,200 depending on which unit and which generation; a locker that engages with a clunk and a lit dash lamp, held steady, is the sound of money staying in your pocket.
Problem areas
Every generation of 4Runner shares the same hierarchy of problems, and it is not the hierarchy most used-car buyers expect. The engines and gearboxes โ the expensive-sounding parts โ are the strong suit. What actually writes these trucks off is corrosion of the frame, followed by a short list of specific, well-understood component failures that are cheap to check and expensive to ignore. Work through this section in the order it is written. It is arranged by how completely each fault can end the conversation.
Frame rust: the fault that decides everything
A 4Runner frame is a fully boxed ladder frame, and boxed frames rust from the inside out. Road salt and brine enter through drain holes and seams, sit in the sections, and corrode the steel where no wax, wash or listing photograph can reach. By the time rust bubbles appear on the outside of a rail, the inside of that rail is usually considerably worse. The severity climbs by generation and by geography: first- and second-generation trucks have had the longest exposure; third-generation trucks from the salt belt are now routinely condemned by it; fourth-generation trucks have the worst reputation of all, with rails, crossmembers and body mounts perforating on trucks whose bodies still shine. A truck that has lived in Georgia, Colorado or California โ which is where much of this site's pool sits โ can be genuinely sound at an age where a Minnesota or New England truck is scrap. Provenance is not a detail on a 4Runner. It is the first fact.
Learn the map. The worst areas are the inside faces of the rails alongside the fuel tank, the rails' lower flanges from the front suspension rearward, the crossmember under the transmission and the one ahead of the rear axle, the rear rails around the spring and shock mounts, the body mount outriggers, and the front rails and lower control arm mounts where road spray concentrates. Surface scale that rings solid under a hammer tap is cosmetic and treatable. Flaking, laminar rust that comes away in sheets, soft spots that dent under a screwdriver handle, and any perforation at all in a rail or crossmember are structural. Frame repair is possible โ patch sections are made for the common failure zones, and a good fabricator can save a rail โ but price it honestly: a single professional patch and paint runs roughly $800โ2,000, a frame swap is a five-figure undertaking nobody sensible performs on a used truck, and a perforated frame fails safety inspection in many states regardless of how the truck drives.
Two reading skills matter here. The first is distinguishing honest age from concealment: a uniform coat of fresh black undercoating applied over everything โ rails, lines, hardware, the lot โ in the week before a sale is a cover story until the seller proves otherwise, exactly because nobody undercoats a sound frame as a favour to the next owner. The second is reading the fasteners and brackets: heavily corroded brake and fuel lines, rotten body mount rubbers and a spare tyre winch seized solid are the frame's supporting witnesses. If the small steel under the truck is dying, the big steel is not far behind.

Lower ball joints, steering and suspension
The third generation's signature mechanical fault is the front lower ball joint, and it deserves its reputation for drama. The joint is loaded in tension by the design of the front suspension, it wears with mileage and hard use, and when it separates it does so completely โ the corner of the truck drops onto the wheel and the steering goes with it. Toyota recalled these joints on 2001โ02 trucks, but the design spans the generation, and the safe rule is simple: on any third-generation truck, lower ball joints are a service item, not a lifetime part. Ask when they were last replaced and with what brand โ cheap aftermarket joints have a poor record here, and genuine or quality parts matter. A set of quality lower ball joints fitted runs roughly $400โ800, which makes this the easiest negotiation on the truck: undocumented joints at high mileage get priced into the offer and replaced in your first month, no argument. The test on a viewing is a pry bar under the tyre with the corner jacked and supported, feeling for vertical play, plus a look at the boot for splits and leaked grease.
Steering racks weep from their end seals on third- and fourth-generation trucks, showing as fluid inside the tie-rod boots and a power steering reservoir that needs topping up; a rack replacement runs roughly $700โ1,300 fitted. Fourth-generation trucks add the X-REAS system on Sport Edition and many Limited trucks: diagonally linked shock absorbers that share fluid, so a leak at one corner is a system event, and proper repair can mean replacing linked pairs at roughly $1,200โ2,500. Many owners, facing that bill, convert to conventional shocks and delete the system โ a legitimate choice that should be disclosed and priced, not discovered. Fifth-generation trucks with KDSS present the mirror-image issue: the hydraulic system that disconnects the anti-roll bars off-road is excellent when sealed and expensive when not, with accumulator and line work running into four figures; a KDSS truck that leans persistently to one side at rest is telling you the system needs attention. On all generations, budget for the ordinary: sway bar links, upper ball joints, control arm bushes and tired rear shocks are wear items on any twenty-year-old truck, and a front end refreshed with quality parts is a $1,000โ2,000 programme, not a surprise.
CV boots split on the front axles of every four-wheel-drive generation, and a split boot ignored becomes a clicking CV joint and then an axle. Lifted trucks accelerate all of this โ steeper CV angles, faster boot and joint wear, heavier steering loads โ which is why the modification question in the inspection section matters. A lift is not a fault. An undocumented lift with worn components and no alignment history is a bill wearing a costume.
Cooling systems, radiators and the failures that cascade
Heat is the second theme of 4Runner ownership, and it connects faults that listings treat as unrelated. The 3VZ-E's head gaskets fail partly because the engine runs hot; the third generation's strawberry milkshake begins in a corroding radiator; the 1GR-FE and 2UZ-FE both announce neglect through their water pumps. The common thread is that Toyota cooling systems are adequate when maintained and unforgiving of the two classic used-truck sins: coolant that is never changed, and overheating events that are driven through rather than stopped for.
Radiators age out on all of these trucks โ plastic tanks embrittle, seams weep, and the internal transmission cooler on automatics corrodes as described in the engines section. Treat a radiator of unknown age on a third-generation automatic as a consumable to be replaced preventatively, and on any generation read the coolant itself: it should be clean pink or red Toyota coolant, not rusty water, not green universal coolant of unknown vintage, and never, ever pink-frothy. Fan clutches on the belt-driven generations wear and freewheel, showing up as overheating in traffic or with the air conditioning on at idle while the truck runs cool at speed โ a pattern that sends owners chasing thermostats and water pumps when the cure is a $150โ300 clutch. Head-gasket symptoms, on any engine, are the ones from the 3VZ-E discussion: rapid hose pressurisation from cold, bubbles in the reservoir, unexplained coolant loss, white exhaust vapour on a warm engine. An overheating event in a truck's history is a fact to price, not a story to wave away, because the second overheating event is the one that warps heads.
Rear axle seals, brakes and bearings
The third and fourth generations share a rear axle habit worth knowing: the inner axle seals leak gear oil into the brake assemblies, soaking the rear brake shoes or pads and contaminating the parking brake, and the underlying cause is often a clogged axle breather pressurising the housing, or early bearing wear letting the axle move in the seal. The signs are oil at the inside of a rear wheel, a parking brake that will not hold on a hill, and a damp, glazed look to the rear brakes. A seal alone is a modest job at roughly $300โ600 a side; seals with bearings and brake parts run $700โ1,200 a side, and a seller who has done both sides with the breather replaced has done it properly. Front brakes on all generations are straightforward discs, but fourth- and fifth-generation trucks are known for calipers whose pistons seize โ one pad worn to the metal while its neighbour looks new is the fingerprint โ at roughly $250โ500 a corner fitted with a quality caliper. Warped-feeling brake judder on these trucks is as often a sticking caliper or uneven pad deposits as a truly warped disc; make the seller's mechanic prove which before anyone prices a full brake job into a deal, in either direction.
Body, tailgate, electrics and the small stuff that prices a truck
The bodies rust far less than the frames, but they have their places: rear wheel arches and the lower rear quarters on first- through third-generation trucks, the tailgate and rear hatch around the window seal, door bottoms, and the windshield frame on trucks that have had glass replaced badly. The powered rear window โ a 4Runner signature from the first generation onward โ is a joy when it works and a diagnostic exercise when it does not: motors tire, regulators wear, the tailgate will not open with the window part-down by design, and on early trucks the key switch in the tailgate corrodes. Test it fully, up and down, twice; a tailgate window repair runs roughly $300โ800 depending on which part has failed, and a first-generation truck also wants its removable top seals inspected, because a top that has leaked for a decade has been quietly feeding the rear floor. Sunroofs on Limiteds block their drain tubes and wet the headliner and front footwells; air conditioning compressors and their clutches age out across the range at roughly $700โ1,300 fitted; and the fourth generation's dashboard is prone to cracking and surface deterioration in hot climates, a cosmetic fault that is expensive to make right and therefore worth real money off. Antennas snap, seat motors die, the clock in the dash gives up โ none of it strands you, all of it adds up, and a truck where the small things work is a truck that was maintained by someone who noticed things. That observation, repeated across this guide, is not a platitude. On a vehicle whose major components last this long, the small things are the maintenance record you can see.
How to inspect one
Allow ninety minutes, bring a torch, a small hammer or the handle of a screwdriver for tapping frame steel, a tyre pressure gauge, a magnet in a cloth, and a friend to work the controls while you watch underneath. Inspect the frame first and the engine second โ the reverse of instinct, and the order that matches how these trucks actually fail. If the truck passes you, a paid lift inspection is the best money in the whole purchase.

- Paperwork and provenance first. Match the VIN on the title to the plate at the base of the windshield and the sticker on the driver's door. Establish where the truck has lived โ registrations, service records, the seller's own history. A salt-belt life is not an automatic no, but it raises the standard the frame inspection below has to meet. Ask for timing belt evidence on any 5VZ-FE or 2UZ-FE truck, head-gasket evidence on any 3VZ-E truck, and ball joint evidence on any third-generation truck, now, while everyone is still friendly.
- The frame, underneath, before anything else. Torch and tap hammer along both rails, inside faces included, then the crossmembers, body mount outriggers, spring and shock mounts and the rails beside the fuel tank โ the map from the rust section. Scale that rings is acceptable; perforation, flaking layers or steel that dents under the hammer handle ends the viewing for any truck priced as a keeper. Read fresh undercoating as a claim that needs proof, and check brake and fuel lines and body mount rubbers as the frame's witnesses.
- Cold start. Insist the engine is stone cold on arrival. A 22R-family four that rattles its timing chain for seconds is giving you its warning; a V6 or V8 should start cleanly and settle. Watch the exhaust: white vapour that persists on a warm engine is coolant until proven otherwise, blue smoke is oil, and either reprices the truck on the spot.
- The coolant and the milkshake check. On a cold engine, open the coolant reservoir: clean pink or red coolant is right; rust, oil sheen or pink froth are all wrong, each in its own expensive way. On any automatic, especially a third-generation truck, pull the transmission dipstick โ the fluid should be red and smell neutral, not pink, milky or burnt. This is the strawberry milkshake test from the engines section, and it takes ninety seconds.
- Head-gasket tests on the V6s. With the engine cold, squeeze the top radiator hose, then start the engine and squeeze again over the first minute: a hose that goes hard almost immediately is being pressurised by combustion gas. Watch the reservoir for bubbles at idle, check the oil filler cap for mayonnaise-like emulsion, and confirm the temperature gauge climbs to the middle and stays there on the drive. These tests matter most on the 3VZ-E, but they cost nothing on any truck.
- Belts, pumps and leaks under the hood. Look for the timing belt sticker and any dated record on 5VZ-FE and 2UZ-FE trucks; no evidence at high mileage means the job goes in the offer. Check for water pump weep stains, valve cover oil on the exhaust manifolds, power steering fluid level and rack leaks at the tie-rod boots, and the general honesty of the bay โ a steam-cleaned engine on a high-mileage truck is a question, not a compliment.
- Front suspension and ball joints. With each front corner jacked and properly supported, rock the wheel top and bottom and pry under the tyre for lower ball joint play โ the test from the problem areas section, and on a third-generation truck it is pass-or-price, never pass-or-ignore. Check CV boots for splits, steering for free play, and tyre wear patterns for the alignment story the truck is telling.
- Engage everything. Cycle the transfer case through every mode including low range, engage any rear locker, and confirm the dashboard lamps light and then go out as they should. On a multi-mode or full-time truck, use the centre differential lock too. Actuators die from disuse; a mode that will not engage on the viewing will not engage on the trail, and the repair belongs in the price.
- The test drive. Twenty minutes minimum, mixed roads, one steep hill if you can find it. The automatic should shift firmly without flaring or delay into reverse; a manual should take second gear cleanly, hot and cold. Note the temperature gauge in traffic with the air conditioning on โ the fan clutch test โ and brake firmly from speed twice: straight stops, no judder, no pull. Listen for CV clicking on full lock and bearing hum that changes as you weave gently.
- Rear axle and brakes. After the drive, look inside both rear wheels for gear oil, and test the parking brake on a slope. Oil at a rear wheel means the axle seal story from the problem areas section is now your story; price seals, bearings and contaminated brake parts accordingly.
- Body, tailgate and rear window. Run the powered rear window fully down and up twice, open and close the tailgate or hatch, and check the spare tyre, its winch and the rear floor for the water that a leaking window seal delivers. Walk the arches, door bottoms and quarters with the magnet, and on a first-generation truck, inspect the removable top's seals and the floor beneath it.
- Electrics and comfort. Work everything: air conditioning cold at idle, heater hot, all windows, sunroof and its drains if fitted, wipers, washers, lights, seat motors, the clock. On an X-REAS truck, look at all four shock absorbers for leaks; on a KDSS truck, park on level ground and check for a persistent lean. Small failures are negotiating items; patterns of failure are a maintenance biography.
- Modifications audit. List every non-standard part: lift, tyre size, bumpers, armour, roof kit, supercharger. Ask who fitted it, whether the speedometer and gearing were corrected for tyre size, and whether alignment records exist. Good modifications by known makers, documented, can add value. Anonymous lifts and electrical improvisation subtract it, and factory-original trucks are the appreciating end of this market.
- Stance and the photograph test. Stand back on level ground. The truck should sit level side to side, with the rear neither sagging under nothing nor jacked by tired helper springs. Take the side photograph from twenty feet away; stance faults and panel ripples you talked yourself out of in person are obvious in a picture, and the picture is free.
Values
The market block beneath this guide carries the current listings and recorded figures for the 4Runner, refreshed at every build, and it is the only place in this guide where you should read numbers. What this section can give you โ durably, whatever this month's listings say โ is how to read those numbers, because the 4Runner market has a shape that catches newcomers out.
The first feature of that shape is the condition spread, which is wider for this model than for almost any comparable truck. The frame is the reason. Two trucks of the same year, trim and mileage can be a sound, serviceable vehicle and a parts donor respectively, differing only in the steel underneath, and the listings will not always tell you which is which โ sellers photograph paint, not rails. Read every asking price as a claim about the frame that you have to verify in person, and expect the honest trucks to cluster well above the rusty ones rather than around a single middle value. The second feature is the Toyota premium itself: 4Runners ask more than equivalent domestic rivals of the same age, and they get it, because the buyer pool believes โ mostly correctly โ that the mechanicals will outlast the purchase. That premium is rational for a documented truck and pure waste on an undocumented one, because the premium is buying the reputation, and the reputation lives in the records.
Generation by generation, the premiums sit where the desirability is. First-generation trucks price on originality and the solid-axle years carry their own premium within that. Third-generation trucks with the rear locker, a manual gearbox or a documented supercharger installation ask noticeably more than ordinary SR5s, and get it from the off-road market. Fourth-generation V8 trucks are the value end of the range relative to what they are โ a Land Cruiser-engined, full-time four-wheel-drive wagon that the market prices as an old SUV โ while fifth-generation TRD Pro trucks in launch colours are the modern collector play and price accordingly. Across all generations, the asking-versus-achieved gap follows the usual rule with one twist: sellers of genuinely good trucks know what they have and hold firm, while the negotiable trucks are negotiable for reasons you will find with a torch. Budget your offer around the inspection findings โ ball joints, belt, radiator, seals โ rather than around a percentage, and you will be negotiating the way this market actually works.
Finally, the project-versus-driver gap. A running, driving 4Runner with a sound frame and deferred maintenance is a rational purchase at the right price, because the catch-up work is known, bounded and listed throughout this guide. A non-running truck, or any truck with structural frame rust, is not a cheaper version of the same purchase; it is a different purchase, priced by its parts and its trim, and it should be negotiated that way from the first conversation.
Parts and ownership
The 4Runner is one of the easiest older trucks in America to keep, and the reason is arithmetic: Toyota sold them in huge numbers for forty years, the mechanicals overlap heavily with the Tacoma, Tundra, Land Cruiser and Lexus GX lines, and the off-road industry adopted the third and fifth generations as house platforms. Between Toyota dealers, the dismantler network and the aftermarket, there is very little on these trucks you cannot buy, and most of it is priced like the mainstream part it is.
Easy and cheap: service items, filters, brakes, steering and suspension wear parts, ball joints, radiators, water pumps, alternators, starters and their contact kits, CV axles, exhaust sections, glass and weatherstrips for the common generations. Order today, fit this weekend, at prices close to modern-truck money. Harder or dearer: X-REAS shock absorbers as matched linked units, KDSS hydraulic components, fourth-generation dashboards in uncracked condition, first-generation removable-top seals and trim, 22R-TE turbo-specific parts, clean rust-free body panels for the early generations in salt-belt states, and โ the extreme case โ a sound replacement frame, which exists in the dismantler market but turns any repair into a major project. The TRD supercharger for the 5VZ-FE is discontinued as a new kit, so supercharged trucks are maintained from the used and specialist market; price that into a supercharged purchase rather than discovering it afterwards.
Running costs. Fuel economy is the honest downside: expect the low-to-mid teens in town from the V6s and V8 and only a little better from the fours, which work harder to move the same truck. The fifth generation's five-speed automatic does not transform this; these are shaped like garden sheds and geared for durability, and the fuel bill is the subscription price. Insurance is unremarkable, tyres in the common sizes are mainstream money, and a sorted truck serviced on time is a realistic daily driver at any age covered here. The budget line that catches new owners is, as with any old vehicle, the first year: catching up deferred maintenance on a running truck โ timing belt service where due, ball joints, fluids throughout including transfer case and differentials, brake refresh, radiator on a third-generation automatic โ honestly runs $2,000โ4,500 at a shop before you improve anything, and recommissioning a truck that has sat for years runs more, because sitting is hard on seals, tyres, brakes and fuel systems. Buy the truck that has been used and serviced over the truck that has been asleep, even at a higher price: on a 4Runner, mileage is a weak signal and maintenance is a strong one, and the whole ownership experience follows from getting that the right way round.

Which one to buy
- The all-rounder: third-generation SR5 or Limited, 1999โ2002, 3.4 V6. The right size, the best engine of the classic generations, the deepest parts and knowledge support, and the multi-mode transfer case on the later trucks. Documented ball joints and timing belt, sound frame โ that is the whole recipe.
- The value buy: fourth-generation V8. A Land Cruiser engine, full-time four-wheel drive and real towing ability, priced by the market as a tired old SUV. On a sound frame with a documented timing belt, it is the most truck per dollar in this guide.
- The enthusiast's truck: first-generation, 1984โ85 solid axle or a clean 22R-E truck. Removable top, mechanical simplicity and genuine character. Buy the least modified, least rusty example you can find and accept hobby-car running costs.
- The survivor's pick: second-generation 22R-E manual. Slow, simple and nearly unkillable, without the 3VZ-E's head-gasket question hanging over every journey. The thinking buyer's second generation.
- The modern buy: fifth-generation TRD Off-Road or TRD Pro. The newest trucks in this guide's scope, with the locker and terrain systems fitted at the factory. TRD Pro launch colours carry a collector premium; a plain TRD Off-Road is the same tool for less.
- The family workhorse: fourth- or fifth-generation Limited. Full-time four-wheel drive you never have to think about, the best interiors in the range, and โ on the fourth generation โ the option of the V8. Buy on frame and records exactly as strictly as any other trim.
And the rule that overrides all of the above: buy the frame, then the records, then the specification โ in that order, every time. Engines, ball joints, radiators and belts are all fixable at prices you can plan for, and this guide has priced them for you. A perforated frame is the one fault that turns the most reliable truck Toyota ever sold into a parts car, and it is the one thing about a 4Runner that no amount of money spent afterwards makes original again.
See the 102 4Runner SR5 Sport Utility 4D cars currently listed.
