Subaru WRX WRX Sedan 4D buyer's guide
Subaru WRX WRX Sedan 4D -- the model's own buyer's guide: variants, values and what to check.
Years listed: 2002-2005 Β· Series: Impreza WRX
Overview and history
The Subaru WRX is the rally car that escaped. Subaru had built the Impreza WRX in Japan since 1992 β a turbocharged, all-wheel-drive homologation special that carried Colin McRae to the 1995 World Rally Championship and Subaru to three consecutive manufacturers' titles β but for a decade America was allowed only to watch. What the US got instead, from 1998, was the naturally aspirated Impreza 2.5RS: the right shape, the right chassis, no turbo. It built the demand. When the WRX finally arrived in the United States in the spring of 2001, as a 2002 model, it landed with 227 hp, a five-speed manual, all-wheel drive and a bonnet scoop, at a moment when nothing else at its price offered that combination. It is not too much to say it created the modern American performance compact market and dragged Mitsubishi's Lancer Evolution across the Pacific behind it.
The car that did it was the second-generation Impreza, chassis code GD for the sedan and GG for the wagon, and it is the car this guide is mostly about β for a simple reason. Every WRX currently in our listings is one. We track 16 WRXs for sale, all of them US-market GD cars from 2002 to 2005: eight from 2002, six from 2004, and one each from 2003 and 2005. Twelve of the sixteen are manuals and four are automatics, and all sixteen come through Facebook Marketplace sellers. The colours split evenly between World Rally Blue and silver, five cars each, with three red and three black cars behind them. Later WRXs exist in large numbers β the 2.5-litre cars of 2006 onward, the wide-body hatchbacks, the direct-injected VA of 2015 and the current VB β and this guide covers them in proportion, but the pool you are actually shopping from today is the original 2.0-litre GD, and the GD is where the depth belongs.
Two faces cover the pool. The 2002β03 cars wear the round headlamps that earned them the name bugeye β mocked when new, now the most recognisable WRX of all. For 2004 Subaru facelifted the car with the teardrop lamps everyone calls the blobeye, revised the suspension and, the same year, finally sent America the WRX STI: 300 hp, a 2.5-litre engine, a six-speed gearbox and the hardware to back the badge up. The STI is a different model with its own market, but it haunts this one, because a generation of owners has spent twenty years fitting STI wings, wheels, badges and bonnets to ordinary WRXs β several cars in our own photo pool included. Telling a WRX from a WRX in STI clothing is a core buying skill, and this guide returns to it.
What defines a GD WRX today is not rarity or originality. It is modification and use. These were cheap, fast, tuneable cars bought young, and most were driven the way the advertising suggested. In the photo pool supplied with our listings β ten of the sixteen cars β eight are modified beyond argument, with aftermarket wheels, wings, bonnets, exhausts or lamps, and the remaining two wear wheels that are not the factory fitment for their year. A genuinely standard GD is now the exception, and the market knows it. The good news is that the underlying car is honest and strong: a longitudinal flat-four, a simple and effective all-wheel-drive system, and mechanicals that tolerate hard use far better than their reputation suggests β provided the oil was kept full, the timing belt was changed on time, and nobody turned the boost up without tuning for it. Those three provisos, in that order, are the whole used-WRX market.

The models
Every US WRX is an Impreza underneath, whatever the later marketing says, and every GD WRX is the same basic car: a steel unibody, a turbocharged flat-four mounted longitudinally ahead of the front axle line, permanent all-wheel drive, MacPherson struts at both ends, and a top-mount intercooler fed by the bonnet scoop. The differences that matter are the model year, the body β sedan or Sport Wagon β and the gearbox. Trim levels in the GD years are simple: there was effectively one WRX specification, with options such as the Premium package (heated seats, a sunroof on the sedan, a rear spoiler) layered on top, and the short-lived WRX TR tuner-ready trim belongs to the 2006β07 cars, after our pool ends.
| Model | Years | Engine | Output | Built | Character |
|---|---|---|---|---|---|
| WRX sedan (bugeye) | 2002β2003 | 2.0 turbo flat-four (EJ205) | 227 hp | High volume | The original US WRX; the icon of the range |
| WRX Sport Wagon (bugeye) | 2002β2003 | 2.0 turbo flat-four (EJ205) | 227 hp | Lower volume | The sleeper; narrower track, same engine |
| WRX sedan (blobeye) | 2004β2005 | 2.0 turbo flat-four (EJ205) | 227 hp | High volume | Sharper face, better suspension tune, same heart |
| WRX Sport Wagon (blobeye) | 2004β2005 | 2.0 turbo flat-four (EJ205) | 227 hp | Lower volume | The thinking driver's WRX; increasingly sought |
| WRX (hawkeye) | 2006β2007 | 2.5 turbo flat-four (EJ255) | 230 hp | High volume | More torque, more weight, new failure list |
| WRX (narrow-body) | 2008 | 2.5 turbo flat-four (EJ255) | 224 hp | One soft year | The dip in the range; buy on condition only |
| WRX (wide-body era) | 2009β2014 | 2.5 turbo flat-four (EJ255) | 265 hp | High volume | The fast EJ car; hatch or sedan |
| WRX (VA) | 2015β2021 | 2.0 turbo flat-four (FA20DIT) | 268 hp | High volume | Direct injection, six-speed, no hatch |
| WRX (VB) | 2022βpresent | 2.4 turbo flat-four (FA24DIT) | 271 hp | Current car | Bigger engine, gentler tune, no STI above it |
| WRX STI (for reference) | 2004β2021 | 2.5 turbo flat-four (EJ257) | 300β310 hp | Lower volume | The flagship β a different model, priced differently |
(Outputs are US-market SAE net figures. Production was high throughout β the WRX was a volume performance car, not a limited edition β so survival in good, unmodified order, not original scarcity, is what makes an individual car valuable today.)
The bugeye (2002β03). The launch car, and half our pool: eight of the sixteen listings are 2002s alone. Sedan and wagon share the EJ205 engine and the 227 hp output; the wagon rides on a 20 mm narrower track with its own front control arms and no sedan's blistered front wings, which matters when you order suspension parts and when you judge panel fit. Early 2002 cars are the purest and the most fragile in one specific place β the five-speed gearbox's gear set was widened partway through 2002 production after breakages on launch cars, covered in the gearbox section. The 2002β03 seats, deeply bolstered one-piece buckets, are the best seats ever fitted to a standard WRX and a quiet reason enthusiasts favour these years.
The blobeye (2004β05). The facelift brought the teardrop headlamps, a revised bonnet and bumper, retuned dampers and, on the sedan, aluminium front lower control arms in place of steel. The engine is unchanged. The 2005 cars got a revised cabin β a new dashboard and console, a smaller three-spoke wheel and a single-tip exhaust in place of the twin-tip β and are the most civilised GD WRXs to sit in. Six of our sixteen listings are 2004s, and the blobeye is where most GD buyers land: same character as the bugeye, and headlamps that have not yet yellowed as badly β though they do.
The wagon question. The Sport Wagon is the connoisseur's pick: identical pace, a genuinely useful load bay, and an ownership profile that skewed older and gentler. Our pool files every car as a sedan β including one photographed car that is plainly a five-door wagon, roof rails and all β so read photographs, not listing categories, when body style matters to you. A wagon also carries its own rust trap at the rear strut towers, covered in the problem areas.
After the GD. The 2006 hawkeye swapped the 2.0 for the 2.5-litre EJ255: only 3 hp more on paper, but a fat slab of extra torque and new weaknesses around its pistons and secondary air system. The 2008 car went soft and is the range's dip; the 2009 car answered with 265 hp, and the wide-body cars that followed are the quickest EJ WRXs of all. The 2015 VA dropped the Impreza name, the hatchback and the EJ in one move, substituting the direct-injected FA20DIT. The current VB uses a 2.4-litre FA24DIT and stands alone: Subaru cancelled the STI in 2022, so for the first time there is no flagship above the WRX β already firming up interest in every earlier car, GDs included.


Engines and gearboxes
The EJ205: the 2.0-litre turbo (2002β2005)
Every car in our pool runs the same engine, and it is a good one to have standardised on. The EJ205 is a 1,994 cc flat-four β bore 92 mm, stroke 75 mm β with an aluminium open-deck block, belt-driven double overhead cams, four valves per cylinder and a compression ratio of 8.0:1, low enough for boost. A Mitsubishi TD04L turbocharger blows through a top-mount air-to-air intercooler at a stock peak of about 13.5 psi, managed by a three-port boost control solenoid under electronic control, and the result is 227 hp at 6,000 rpm and 217 lb-ft of torque at 4,000 rpm. Throttle is by cable, there is no variable valve timing on the US engine, and the redline is 7,000 rpm. It is a simple, legible turbo engine of the old school: a noticeable pause while the turbo wakes below 3,000 rpm, then a hard, flat surge to the redline, accompanied by the off-beat thrum that only an unequal-length exhaust manifold makes. US cars keep that manifold, and with it the signature burble; if a GD sounds smooth and even like a Porsche, someone has fitted an equal-length header.
A healthy EJ205 starts instantly, idles with a slight flat-four rock, and pulls cleanly without hesitation, smoke or detonation noise β a marbles-in-a-tin rattle under load that means the engine is knocking and the ECU is pulling timing to save itself. Oil pressure is not displayed, so your instruments are the dipstick, the exhaust and your ears. The service facts that govern this engine's life are three. First, the timing belt: Subaru's US schedule is replacement at 105,000 miles or 105 months, belt, idlers, tensioner and water pump together, and an engine with no evidence of that job at the right age is an engine priced as if the job is due today β realistically $900β1,500 at an independent shop, parts and labour. Second, oil: the turbo EJ consumes some oil by design, the sump holds only about 4.8 quarts, and Subaru's own handbook tells owners to check the level at every fuel stop. Owners who did not are why these engines spin bearings. Third, spark plugs at around 60,000 miles, accessed awkwardly down the sides of the engine β a skipped plug service shows as a misfire under boost long before it shows at idle.
Two EJ205 specifics catch buyers out. The up-pipe β the pipe feeding exhaust gas up to the turbo β contains a catalytic converter on 2002β05 WRXs, placed ahead of the turbo to light off early for emissions. With age and heat cycles that catalyst can break up, and its debris goes one way: through the turbine. A rattling up-pipe, a sudden loss of boost or a turbo that starts to whine and smoke is often this, and the established cure is a catalyst-free up-pipe from an STI or a later car. And the tumble generator valves β butterfly plates in the intake runners that stir the charge on cold starts β have motors and position sensors that fail with age, logging fault codes and a check-engine light on a car that otherwise runs well. Neither fault is fatal; both are priced into a knowing offer.
The 2.5-litre EJ: EJ255 and EJ257 (2006β2014, and the STI)
From 2006 the WRX moved to the 2.5-litre EJ255, and the STI had used its close relation, the EJ257, since 2004. Both share a semi-closed-deck block casting β stronger than the EJ205's open deck β with 99.5 mm bores, and both make their extra performance from displacement and, in the STI, a larger turbocharger: the WRX kept a small TD04 in 2006β08 and gained the STI-style VF52 for the 265 hp cars of 2009 onward, while the STI ran the VF39 and its successors for 300 hp. The EJ255 in WRX tune runs different pistons and cylinder heads from the EJ257, so an engine advertised as an STI swap wants its engine code checked, not its seller believed: the code is stamped on the top of the block, at the rear, under the intercooler.
The 2.5s changed the ownership bargain. They are torquier, quieter and easier to drive, and they introduced the two failures this engine family is now famous for. The first is cracked piston ringlands: the cast pistons' top ring land fractures under detonation β from a lean tune, low-octane fuel, an intake fitted without a remap, or sustained knock the ECU could not fully correct β and the cylinder loses compression. The signs are a rhythmic misfire, rising oil consumption, blow-by that puffs from the oil filler with the cap off, and a compression test that finds one cylinder 30 psi or more below its neighbours. The second is the secondary air injection system fitted to 2006-onward WRXs: an electric pump blows air into the exhaust ports on cold starts through two combination valves buried beneath the intake manifold and turbo inlet pipe. The valves corrode and stick, the pump fills with condensation, and the repair β parts plus the labour to reach them β runs $1,200β2,500 done properly, which is why so many cars have the system deleted and the codes mapped out. A deleted car is not necessarily a bad car, but you should know it has been done, and in emissions-testing states it can decide whether the car can be registered at all.
The FA engines: FA20DIT and FA24DIT (2015βpresent)
The VA WRX of 2015 replaced the EJ with the FA20DIT: a 2.0-litre flat-four with direct fuel injection, a twin-scroll turbocharger mounted low at the front of the engine, chain-driven cams and 268 hp. It is a thoroughly modern engine β strong low-down torque from 2,000 rpm, far better economy, no timing-belt service β with a modern engine's one structural weakness: because fuel no longer washes the intake valves, carbon builds up on their backs, and by 60,000β80,000 miles many cars need a walnut-shell blast cleaning, roughly $400β700, to restore a clean idle and full power. Early VA cars were recalled for an engine-control software fault that could allow pre-ignition; the fix was a reflash plus, on some cars, a leak-down test to prove the engine had survived. Ask for evidence of the recall on a 2015β16 car exactly as you would ask for a timing-belt invoice on a GD. The current VB's FA24DIT scales the same recipe to 2.4 litres and 271 hp, deliberately understressed; its record is still being written.
Gearboxes and the all-wheel-drive system
The GD WRX's standard gearbox is a five-speed manual, type TY75, in a split case that doubles as the front differential housing β and it is the component with the worst reputation on the car, only partly deserved. The design limit is real: the case flexes under shock loads, the gears are narrow, and a launch-heavy life, a heavy clutch or a big power increase will strip second or third gear. Subaru widened the gear set partway through 2002 production, so the earliest cars carry the most fragile version. What the reputation misses is that a standard-power car driven with mechanical sympathy rarely breaks its gearbox, while a tuned car breaks it regardless of year. Judge the individual box: second-gear synchromesh is the first casualty (a crunch on fast upshifts, and on downshifts that will not engage first above walking pace on early cars), a whine in fifth suggests bearing wear, and any box that jumps out of gear under load is a rebuild, realistically $2,000β3,500 fitted, or a used-box gamble. The clutch is a conventional single-plate unit, $1,200β1,800 fitted with the flywheel attended to; cold clutch judder on 2002β03 cars was a known factory complaint with a revised clutch and flywheel as the cure, so judder on an early car with paperwork for that fix is history, not a warning.
The four-speed automatic fitted to a quarter of our pool β four of sixteen cars β is a different and in some ways cleverer device. Where the manual car splits torque 50:50 through a viscous centre differential, the automatic uses Subaru's VTD system: a planetary centre differential splitting torque 45:55 front to rear, locked progressively by an electronically controlled clutch pack. It is smooth, strong and entirely respectable β but it changes the car's character, blunting the turbo's surge, and the market prices autos below manuals accordingly. Test it hot: delayed engagement of drive or reverse, flaring between the 2β3 shift, and dark, burnt-smelling fluid are the tells, and a fluid service history is worth money.
Whichever gearbox a GD has, the driveline behind it is the same: an open front differential, a viscous limited-slip rear differential on the sedan and wagon alike, and half-shafts with CV joints at both ends. Two age faults matter. The rear differential's viscous unit is a sealed silicone device that weakens with heat and mileage until the car behaves as if it has an open differential β one rear wheel spinning uselessly on a loose surface is the field test. And the manual car's viscous centre coupling, once overheated by mismatched tyres or sustained wheelspin, begins to bind: the car hops and chatters in tight, full-lock turns in a parking lot. Do that full-lock test on every viewing. It costs nothing and it interrogates the centre differential, the CV joints and the tyre matching in a single manoeuvre.
Problem areas
Everything in this section follows one organising fact: a GD WRX is now twenty-one to twenty-four years old, and almost none of them has lived a quiet life. The failures below are not a reason to avoid the car β the WRX is fundamentally durable β they are a checklist for separating the survivors from the cars wearing a survivor's clothes. Start with the engine, because on this car the engine is where the money is.
Engine internals: bearings, pistons and head gaskets
Spun rod bearings are the EJ engine's terminal event, and they are almost never the engine's fault. The mechanism is oil starvation in one of its several forms: the sump run low because the owner never checked a dipstick on an engine that consumes oil; sustained hard cornering on a low sump; detonation hammering the bearing shells until they fatigue; or, on a documented minority of cars, a fracture of the oil pickup tube at its brazed joint, which starves the pump even with a full sump. The presentation is unmistakable once it starts β a deep knock from the bottom of the engine that follows road speed under load, glitter in the drained oil, and an engine that is now a rebuild or a replacement, $4,500β7,500 for a properly built short block fitted, more with machining and ancillaries. There is no cheap version of this job, which is why the inspection section spends so much time on oil evidence before you buy rather than after.
Piston ringlands are the 2.5-litre cars' signature failure and a lesser but real risk on tuned 2.0s. The cast piston's top ring land cracks under knock, compression escapes into the crankcase, and the car develops a misfire at idle, a thirst for oil and a filler cap that dances with blow-by. The distinguishing test is a compression test followed by a leak-down test: low compression on one cylinder with leak-down air hissing audibly from the oil filler neck is ringland or ring failure; air from the intake or exhaust is a valve; air bubbling in the coolant is the head gasket. Budget a leak-down test into any purchase of a modified car. It is the single most informative $150β250 you can spend on a WRX, and a seller who refuses one has given you the result anyway.
Head gaskets need a myth buried first. The Subaru head-gasket horror stories belong to the naturally aspirated SOHC EJ25 of the same era, whose single-layer gaskets weep coolant and oil externally as a matter of course. The turbo engines use multi-layer steel gaskets and do not share that failure pattern. A GD WRX head gasket usually fails for a reason β an overheating episode, detonation, a warped head from a previous overheat β and it fails internally: combustion gas pressurising the coolant, the temperature gauge climbing under sustained boost, coolant pushed into the overflow bottle and not drawn back, bubbles in the header tank. The test is chemical, not visual: a combustion-leak tester on the coolant filler changes colour in the presence of exhaust gas, and it settles in five minutes an argument that listing photographs never will. A two-head gasket job with head skimming, new belt and ancillaries is $2,200β3,200 at an independent β significant, but not the engine-out catastrophe of a spun bearing, and a car with a documented gasket job done by a Subaru specialist is not a car to fear.
Oil leaks and consumption fill the gap between those dramas. Valve-cover gaskets harden and weep onto the exhaust β the smell of burning oil after a hot run, with smoke wisping from the right side of the bonnet, is this and not necessarily anything worse. Cam and crank seals leak behind the timing covers, which is why a belt service should always include seals. The turbo's oil feed and return lines weep at their banjo fittings. And every turbo EJ uses some oil: a quart between services on a hard-used car is within the range owners live with; a quart every 500 miles is a turbo seal, rings or ringlands introducing themselves. Ask the seller, directly, how often they add oil, and watch whether the answer matches the dipstick in front of you.

Turbocharger, cooling and breathing
The TD04 turbo itself is a sturdy unit that typically outlasts the engine around it when the oil is clean. Its failure language is specific: a dentist-drill whine under boost that rises with rpm is bearing wear; blue smoke on start-up that clears is oil pooling past a seal; smoke under boost that does not clear is the turbo or the engine, and the leak-down test separates them. Check for shaft play only on a workshop visit β it needs the inlet pipe off β but check the intercooler yourself: the top-mount core's fins flatten where careless hands have leaned, the rubber Y-pipe beneath it splits with heat and age, and an oily film inside the intercooler outlet is normal in trace amounts and a warning in quantity. Boost faults are more often plumbing than turbo: the restrictor pill in the small vacuum hose to the turbo β a tiny brass jet that the whole boost-control strategy is calibrated around β goes missing when hoses are replaced with plain silicone, and the car then overboosts or underboosts while every major component tests good. A car making the wrong boost with shiny new vacuum hoses is usually this $5 part, not a $900 turbo.
Cooling is the EJ's supporting system and its quiet killer, because an overheated flat-four warps heads and starts the head-gasket story above. The factory radiator has plastic end tanks that crack with heat cycles, typically around the top hose neck, and most surviving cars now run an all-aluminium replacement β a point in a car's favour, not a demerit. The header tank on early cars is a metal unit that corrodes from inside; later cars use plastic that goes brittle. Thermostats stick, water pumps weep from their tell-tale hole, and the small coolant hoses to the turbo and throttle body perish invisibly until they burst. A full cooling-system refresh β radiator, hoses, thermostat, pump with the belt β is $700β1,400 in parts and labour and is the best money a new owner can spend pre-emptively.
Breathing and fuelling complete the picture. The mass airflow sensor fouls, especially behind an oiled aftermarket air filter, and a contaminated MAF under-reports airflow, leans the mixture and feeds the detonation that breaks ringlands β a MAF clean or replacement ($150β300) is cheap insurance. Coil packs crack with heat and cause a misfire under boost that owners misdiagnose as a fuel fault. The fuel pump is adequate at standard power and marginal beyond it; a car with a larger turbo on a standard pump is a lean condition waiting for a cold morning. None of these parts is exotic. All of them punish neglect in the same currency.

Rust and body: the map
The GD is galvanised and better protected than most Japanese cars of its era, which has bred a dangerous assumption that it does not rust. It does β selectively, structurally, and in places a walk-around does not reach. Work in this order.
The front subframe. The GD's bolt-on U-shaped front subframe, the cradle beneath the engine that ties the chassis rails together, is the model's notorious rot point. It traps road salt, rusts from the inside, and in the salt belt it perforates to the point of collapse β a structural, MOT-and-inspection-failing part that is also, fortunately, unboltable and replaceable, $400β900 for a good used or pattern frame plus fitting. On any northern car, get underneath and prod it. A seller's photograph set will never show it.
Rear quarters and arches. The seam where the rear bumper meets the quarter panel traps mud against the arch lip, and bubbling at that seam is the GD's most visible rust. It starts inside the lip, so feel the inner edge of every arch with a fingertip: sharp, flaking metal under intact-looking paint is the early stage, and arch repair done properly β cut out, weld, paint β is $600β1,200 a side.
Subframes, sills and the wagon's towers. The rear subframe and its mounting points corrode in the same salt-belt pattern as the front; sill ends and jacking points follow. The wagon adds one of its own: the rear strut towers, hidden inside the load bay behind trim, collect water and rust at their seams, and a wagon with soft towers is a fabrication job, not a panel job β pull the load-bay trim back and look on every wagon viewing. Floor pans and the fuel-filler neck, which sits behind a mud-trapping shield in the right rear arch, complete the map. None of this is the wholesale shell rot of a seventies car; all of it is concentrated exactly where it is hardest to see, which is why the inspection insists on a lift.
Panels and glass. Accident repair is commoner than rust as a body issue β these were cheap fast cars, and many have met something. Panel gaps, overspray on window rubbers, non-factory seam sealer and one headlamp clearer than the other are the tells; the frameless door glass adds its own check, because worn regulators and tired seals mean wind roar at speed and water in the door, and the glass adjustment that cures it is fiddly rather than expensive. Bonnet scoops crack around their mountings, sedan bootlids rust under the spoiler feet, and the factory paint β World Rally Blue especially β fades and clears unevenly on cars that have lived outside.

Suspension, steering, brakes and driveline
Struts knock and leak, and the strut top mounts groan on full lock when their bearings dry out. Front control-arm rear bushings β a liquid-filled bush that splits and leaks β are the GD's standard front-end wear item, announcing themselves as a knock under braking and vagueness in the steering; budget $300β600 a side fitted. Sway-bar drop links rattle cheaply. Wheel bearings are press-in units that drone with speed and change note as you load them in corners; a rear bearing is $300β500 fitted and owners defer it until it roars. The power steering has one famous cheap fault: the O-ring on the pump's suction inlet hardens, the pump draws air, and the fluid froths while the pump whines like a failed unit β a seal costing pennies misdiagnosed as a $400 pump. Racks leak at their seals on high-mile cars. Brakes are sliding-caliper items whose pins seize and whose discs lip; a full hydraulic refresh with calipers attended to is $600β1,200. In the driveline, CV boots split at the front where exhaust heat bakes them, and the rear differential's pinion seal weeps onto the exhaust as a hot-oil smell after parking.
Interior and electrics
The GD cabin is durable cloth and hard plastic, and its faults are honest ones. The 2002β03 bucket seats hold their bolsters well but the driver's entry bolster wears through; 2004β05 seats are flatter and less loved. The dashboard does not crack, but the clock in the centre pod dies on almost every car and the cupholder is a fragile joke. Window regulators slow and fail, door check straps click, and the air conditioning compressor's clutch and idler pulley bearing are wear items whose squeal on engagement is a $150β350 conversation, not a catastrophe. Electrically the car is simple: alternators tire, engine earth straps corrode and cause a museum of intermittent faults, and the factory alarm is far less troublesome than the aftermarket systems layered over it β a car with three fobs and a mystery switch usually needs an auto-electrician's hour removing someone's 2009 alarm install, not a Subaru part. Water leaks come from the door membranes and the wagon's tailgate seals; a damp spare-wheel well on a wagon points at those seals before it points at rust.
How to inspect one
Allow ninety minutes, bring a torch, an oil-filler-cap's worth of scepticism, and a code reader if you have one. Insist on a cold engine β a WRX warmed up before you arrive is hiding its cold-start behaviour, which is half of what you came to hear. If the car passes you, pay for a compression and leak-down test and a lift inspection before money changes hands; on a turbocharged Subaru they are not optional extras.
- Start with the paperwork and the identity. Match the VIN on the title to the plate at the base of the windshield and the stampings on the body. Then establish what the car actually is: a WRX carries the EJ205 engine code on the block and a five-speed or four-speed automatic; a car presented as an STI must show the 2.5-litre EJ257, a six-speed gearbox, Brembo calipers and the large STI intercooler, or it is a WRX in costume, priced as one. Ask for the service file and read it for the three governing items: timing-belt invoices, oil-change intervals, and any engine or gearbox rebuilds.
- Read the modification list like a history file. Walk the car and list every departure from stock: intake, exhaust and downpipe, intercooler, turbo, boost controller, engine management, suspension, wheels. Each power modification demands its matching tune. Ask who tuned it, on what device, and whether the standard parts come with the car. A manual boost controller with no tune evidence is the most dangerous single object you can find on a WRX β walk away or price an engine.
- Cold start. From stone cold, a healthy EJ205 fires at once and settles to a fast idle that falls as it warms. Blue smoke at start-up points to turbo seals or valve stems; smoke that continues is deeper trouble. Listen underneath the flat-four beat for a bottom-end knock in the first seconds β bearing wear announces itself loudest cold, before oil pressure and heat close the clearances.
- The dipstick and filler-cap tests. Read the oil level and judge its condition: low, black and gritty oil on a turbo EJ is a maintenance verdict, not a detail. With the engine idling warm, remove the oil filler cap and rest it loosely on the neck. A cap that sits still is fine; a cap danced off by pulsing blow-by is telling you about rings or a ringland, and the leak-down test in step 10 will name the cylinder.
- Cooling system, cold. Open the header tank before the drive, not after: the coolant should be clean and at level, with no oil film and no mayonnaise emulsion. Squeeze the top hose β it should be soft on a cold engine; a hose already pressurised from cold suggests combustion gas in the coolant. Note the radiator: plastic end tanks or a sound aluminium replacement, per the cooling section.
- Underneath. On a lift if at all possible, and with a torch and a screwdriver for prodding. Prod the front U-subframe along its full length β this is the GD's structural rust test, and perforation here is a replacement job priced into the offer or a walk-away. Check the rear subframe and mounts, the arch lips from inside, the sill ends, and on a wagon, pull the load-bay trim and examine the rear strut towers. Read the underside for oil: valve covers, cam seals behind the timing covers, the turbo's oil lines, the rear differential pinion.
- Body and panels. Sight down each flank for ripples, check every panel gap, and run a fingertip along the inside of each rear arch for the flaking metal that precedes visible bubbling. Compare the two headlamps β one clear, one yellowed usually means one replacement, which means a front corner has been repaired. Check the bonnet scoop's ducting is present and sealed to the intercooler; a scoop feeding nothing is a modified or repaired bonnet.
- The full-lock test. In an empty lot, drive slowly in a full-lock circle in both directions. Binding, hopping or chattering means the viscous centre coupling has been overheated β mismatched tyres are the usual cause, so check the tyres next: all four must be the same make, size and approximate wear, or the differential has been working to reconcile them for every mile they have been fitted. CV joints click in this test too, which is its second job.
- The test drive. Fifteen minutes minimum, engine fully warm, including a stretch where you can use full boost in third and fourth. The car should pull cleanly from 3,000 rpm to the redline with no hesitation, no detonation rattle and no boost that arrives in steps. A misfire under boost is plugs, coil packs or a fuelling fault in ascending order of cost. Watch the temperature gauge throughout β it should rise to the middle and stay there under load; a gauge that climbs on boost and falls at cruise is the head-gasket story starting. Note the boost behaviour against the plumbing section: wrong boost with new silicone hoses is usually the missing restrictor pill.
- Gearbox and clutch, hot. Work every gear at pace. Second-gear synchromesh, up and down, is the test that prices the TY75 box; a crunch that only appears when hot is still a crunch. The clutch should bite progressively without judder or slip under full boost in fourth β slip at peak torque is a clutch at the end of its life. On an automatic, demand the hot tests from the gearbox section: prompt engagement of drive and reverse, no flare on the 2β3 shift, clean fluid on the dipstick.
- Compression and leak-down. Have the numbers, on paper, for any car you are serious about β modified cars without exception. Healthy EJ205 cylinders read evenly; what condemns an engine is not one absolute figure but a spread, one cylinder 25β30 psi or more below the rest. The leak-down test then separates rings and ringlands from valves from head gasket, exactly as the problem-areas section describes. This step, more than any other, is the difference between buying a WRX and buying a WRX-shaped liability.
- Interior and electrics last. Work everything: air conditioning cold, all four windows, the heater on full, washers, lights, the centre clock that will probably be dead. Sit in the driver's seat and judge the bolster; check the spare-wheel well for water and a wagon's load bay for damp. A car that has passed steps 1 to 11 and merely needs a clock and a window regulator is a good car β weight the mechanical evidence heavily and the cosmetics at what they cost to fix.
Values
The computed market block beneath this guide carries the current numbers β what is listed now, and what recorded sales have achieved β and it is refreshed as the market moves, so this section deliberately teaches you how to read it rather than repeating figures that would date. Read the GD market as three markets wearing one badge. At the bottom sit the projects: high-mileage, modified, rusty underneath or carrying an engine symptom, sold as potential. In the middle sit the drivers β honest, maintained, usually modified to some degree, with the paperwork to prove the important jobs have been done. At the top, priced in a different currency of scarcity, sit the genuinely standard cars: unmodified or reversibly modified, low owners, full history, no salt-belt underside. The spread between a project and a standard car in the same model year is wider, proportionally, than for almost any other modern performance car, because the supply of standard cars shrinks every year while demand for them grows.
Within that spread, the premiums are rational and you can use them. Originality pays: a car on its factory wheels, factory exhaust and factory tune, with its standard parts unmolested, is worth more than the sum of the same parts fitted to a modified car, because originality cannot be retrofitted. Documentation pays almost as much β a timing-belt invoice, a leak-down sheet, a named tuner's dyno printout each remove a specific fear, and removed fears are what buyers pay for. The wagon carries a quiet premium among enthusiasts that its original sales mix never predicted, the automatic trades at a discount to the manual in every year, and colour is a real factor: World Rally Blue is the colour the market pictures, and clean blue cars draw the deepest pool of buyers. Against those premiums, set the discounts with equal honesty. A car with an engine symptom is not a cheap car with a fault; on a WRX the fault's repair range is so wide β from a sensor to a short block β that the market prices the worst case, and you should too. Salt-belt undersides discount a car nationally, not just locally, because the front-subframe and arch repairs travel with the car. And a modified car without its standard parts, its tuner's name or its paperwork is discounted twice: once for the work you must verify, and once for the work you must undo.
Asking prices and achieved prices part company furthest at the top of this market, where optimistic sellers price a tidy driver as if it were a standard car and wait. The recorded-sales evidence in the block below is the corrective: sort by what cars like the one in front of you have actually achieved, adjust for the three premiums above, and let a car that is priced as standard but documented as a driver be the seller's problem rather than yours. There is no such thing as a cheap WRX that stays cheap β but there is such a thing as a fairly priced one, and it is almost always the car with the thickest file.
Parts and ownership
The GD WRX is one of the best-supported performance cars of its era, for a structural reason: Subaru built the same basic engine and driveline for two decades, the aftermarket adopted the car wholesale, and the enthusiast community documented everything. Almost any part is available through three channels at once β Subaru dealers, who still supply a surprising depth of GD components; the specialist breakers and importers who trade in used STI and JDM parts; and an aftermarket that offers everything from standard-specification service items to complete forged engines.
Easy and cheap: service items, filters, plugs, belts and tensioners, brake discs, pads and calipers, wheel bearings, drop links and bushings, radiators in both standard and aluminium form, exhaust systems in every diameter and volume, clutches, CV shafts, and the small parts that age out first β the steering pump O-ring, the intercooler Y-pipe, the MAF sensor, the up-pipe that cures the catalyst problem permanently. Order today, fit this weekend, at prices close to ordinary-car money.
Harder and dearer: a good used five-speed gearbox is a finite and shrinking resource, and a rebuilt unit commands real money; the viscous centre and rear differentials are sealed units replaced rather than repaired; STI-badged cosmetic parts β wings, scoops, splitters β are hunted by every WRX owner at once and priced accordingly; wagon-specific rear suspension and trim parts take longer to find than sedan equivalents; and a genuinely rust-free front subframe in the northern states is a part you may have to import from the dry South or West. A quality repaint in World Rally Blue, with the arch and seam work a GD usually wants at the same time, is a serious four-figure commitment β which is why this guide keeps repeating that you buy the shell and the engine's evidence, and fix the rest.
Running costs. Budget the first year honestly. A newly bought GD with an unknown history wants, at minimum, a full fluid service, a timing-belt service if its date is unproven, plugs, and the cooling system inspected end to end β catching up deferred maintenance on a running car typically runs into the low four figures before you improve anything, and recommissioning a car that has sat is more. Thereafter a standard car is ordinary-car money to run: fuel consumption in the low-to-mid twenties per gallon in mixed use, premium fuel without exception, insurance that prices the car's reputation rather than its value, and tyres that must be replaced as a matched set of four β a puncture at half-worn can mean four tyres, because of the centre differential, and that line belongs in every WRX budget. Find your specialist before you need one: a Subaru-savvy independent who owns a leak-down tester and a smoke machine is worth more to a WRX owner than any single part in this section.
Which one to buy
- The all-rounder: a 2004β05 blobeye sedan, manual. The facelift car with the sorted suspension, the better cabin in 2005 form, and the same EJ205 character β the deepest pool to buy from and the easiest to sell into. Buy the best-documented one, not the lowest-mileage one.
- The icon: a 2002β03 bugeye. The original, with the best seats and the round lamps that define the car in the public imagination. Prefer a later-2002 car with the widened gearbox gears, and forgive it nothing on the front subframe.
- The value buy: the Sport Wagon, either face. The same pace and engine with a gentler ownership profile and a load bay, still priced as the sedan's understudy by sellers who have not noticed the enthusiasts arriving. Check the rear strut towers twice.
- The easy life: the automatic. A quarter of our listings carry the VTD automatic, and they trade below the manuals for a gearbox that is smooth, strong and entirely fit for purpose. If your driving is traffic and distance rather than back roads, this is the discount to take.
- The project, knowingly: a modified car with paperwork. Modifications are only a discount when they are undocumented. A car with a named tuner, a dyno sheet, its standard parts in boxes and a leak-down test on file can be the best buy in the market β the same car with none of those is a lottery ticket.
- The later car: a 2009β14 wide-body or a VA. More money, more pace, more refinement, and a different failure list centred on ringlands and, for the VA, intake-valve carbon. Buy one when the GD's rawness is the thing you are trying to avoid, not as a substitute for it.
And the rule that overrides all of the above: buy the engine's evidence and the underside's condition, in that order, and let the wings, wheels and badges come last. Turbos, gearboxes, radiators and suspension are all fixable at prices you can plan for. A WRX with a tired bottom end or a perforated subframe costs more to put right than the finished car will be worth β and a WRX with a thick history file, a clean leak-down sheet and a solid frame is worth stretching for, whatever is bolted to its boot lid.
