Mercedes-Benz 560sl buyer's guide
Mercedes-Benz 560sl -- the model's own buyer's guide: variants, values and what to check.
Years listed: 1986-1989 ยท Series: R107
Overview and history
The 560SL is the final, fullest expression of the R107 โ the SL that Mercedes-Benz built, with remarkably little structural change, from 1971 to 1989, the longest production run of any Mercedes passenger car line to that point. By the time the 560SL arrived for the 1986 model year, the basic car was fifteen years old: a heavy, immensely strong two-seat roadster with a removable steel hardtop, a folding canvas roof that disappears under a flush metal cover, and engineering that owed more to the S-Class sedans of the early 1970s than to any sports car. The 560SL's job was to give that old car its performance back.
Through the late 1970s and early 1980s, emissions rules had strangled the US-market SL. The 380SL of 1981โ85, the car the 560SL replaced in America, made do with 155 hp and felt every one of its roughly 3,600 pounds. Mercedes' answer was not a new car โ the R129 successor was still three years away โ but the biggest engine ever fitted to an R107: the 5.6-litre version of the M117 V8, an engine developed for the flagship 560SEL and 560SEC sedans and coupes. In the SL it produced 227 hp and, more to the point, 279 lb-ft of torque at just 3,250 rpm. Period tests put the car at 60 mph in around seven seconds and on to roughly 130 mph, which restored the SL to the position it had held in the early 1970s: not a sports car in the light, flickable sense, but a fast, unburstable open grand tourer.
The 560SL was a market-specific car, and that matters when you buy one. It was never officially sold in Europe, where the 500SL continued as the flagship; the 560 was built for North America, Japan and Australia, in left-hand drive only, with every car to US federal specification โ catalytic converters, lambda-controlled injection, the deep front air dam, the quad sealed-beam headlamps and the trunk-lid third brake light that US law required from 1986. There is no manual-gearbox version, no coupe version (the fixed-head SLC had died in 1981), and no meaningful specification choice to hunt for: Mercedes sold the car fully equipped and let buyers choose colours and little else.
Equipment that was optional or absent on lesser R107s is simply standard here: anti-lock brakes, a driver's airbag, a limited-slip differential, leather upholstery, automatic climate control, cruise control, power windows, central locking, an anti-theft alarm and the flat-face 15-inch alloy wheels. Both roofs came with the car โ the folding soft top and the colour-matched removable hardtop โ and a correct car today still has both.
In total, 49,347 560SLs were built across the 1986โ89 model years, making it common enough that you can be choosy and rare enough that the best cars are contested. The ownership pattern is the familiar one for an expensive Mercedes: bought new by people who could afford the servicing, maintained properly for a decade, then passed down through owners who increasingly could not โ or who simply parked the car, which for an R107 can be worse. These are now 37- to 40-year-old cars. The engine and gearbox are among the toughest Mercedes ever made; what decides whether a given 560SL is a delight or a drain is the condition of its rubber, its fuel system, its climate control and its body shell โ in roughly that order, and all of it checkable before you buy.

The models
There is only one 560SL. Unlike most cars this guide series covers, the "models" question here is not which variant to choose โ it is which model year, which specification details to verify, and how to tell a genuine, complete car from one that has shed parts and history along the way. Every 560SL is a two-seat roadster with the 5.6-litre M117.967 V8, the four-speed 722.3 automatic and the same standard equipment list. The four model years differ in detail and colour availability, not in substance.
| Model | Years | Engine | Output | Built | Character |
|---|---|---|---|---|---|
| 560SL | 1986 | 5.6 V8 (M117.967), KE-Jetronic | 227 hp | 49,347 across all four years | The launch year; the full specification from day one |
| 560SL | 1987 | 5.6 V8 (M117.967), KE-Jetronic | 227 hp | (included above) | Essentially unchanged; the volume year in today's market |
| 560SL | 1988 | 5.6 V8 (M117.967), KE-Jetronic | 227 hp | (included above) | Detail revisions only; buy on condition, not year |
| 560SL | 1989 | 5.6 V8 (M117.967), KE-Jetronic | 227 hp | (included above) | The final year of the R107; "last of the line" appeal |
(Outputs are US SAE net figures. Production is not honestly split by model year in the sources a buyer can check, so the total is given once rather than invented per year.)
Specification. A correct US 560SL carries: ABS brakes, driver airbag in the four-spoke steering wheel, limited-slip differential, leather seats and door trim, burl walnut console and dash trim, automatic climate control with push-button controls, cruise control, power windows and mirrors, central locking, alarm, Becker Grand Prix radio with a Hirschmann power antenna, heated hardtop rear window, and 205/65 VR 15 tyres on 7J x 15 flat-face alloy wheels. Options were few โ heated seats are the one you will actually encounter. If a car you are viewing lacks the airbag wheel, the ABS or the limited-slip specification, it is not a US 560SL as built, whatever the badge says.
Identity checks. This is where the money is protected. The chassis type is 107.048: the VIN of a US car begins WDBBA48D, the chassis number stamped in the engine bay reads 107.048, and the engine number begins 117.967. Check all three against the title before anything else. A 500SL engine (117.960) or a sedan 5.6 in a claimed 560SL is not a catastrophe โ the engines are close relatives โ but the car is worth less than a numbers-correct one and the seller should not be paid as though it were. The data card, obtainable from the VIN through Mercedes-Benz, lists the original paint and trim codes and the factory options; a car whose colours match its codes is worth more than one wearing a prettier colour it was not born with.
The badge traps. Because the 560SL sat at the top of the range, lesser R107s get dressed up as one. A 380SL or 450SL with a 560SL badge is easy to catch: the earlier cars lack the deep front air dam, the third brake light and the airbag wheel, and their chassis numbers (107.045 for the 380SL, 107.044 for the 450SL) give them away in seconds. The reverse fraud โ a 560SL sold as a low-mileage original when the odometer has simply stopped โ is subtler and more common, and it is covered in the problem areas: the VDO odometer's plastic drive gears crumble with age, the counter freezes, and the car can cover years of use while "documented" mileage stands still. Treat any 560SL whose mileage history has a long flat gap as a car of unknown mileage and price it that way.


Engines and gearboxes
The V8: M117.967
The 5.6 is the largest of the M117 family: 5,547 cc from an aluminium-alloy block with aluminium heads, a single overhead camshaft per bank driven by a duplex timing chain, two valves per cylinder and hydraulic lifters that need no adjustment. It is an understressed engine โ 227 hp from 5.6 litres is barely 41 hp per litre โ and that is precisely why good ones last so long. What the specification sheet does not show is the torque: 279 lb-ft at 3,250 rpm, with most of it available far below that, which is why the 560SL feels effortless in a way the figures do not suggest. It pulls from idle, overtakes without a downshift drama, and cruises at freeway speed turning barely 2,500 rpm through its tall 2.47:1 final drive.
A healthy M117.967 has a set of behaviours you can check on any viewing. It starts from cold with a brief flare to around 1,000 rpm and settles to a smooth, almost silent idle near 650โ750 rpm once warm. The oil pressure gauge pegs at 3 bar as soon as the engine is above fast idle; at a hot idle it may fall back โ toward 1.5โ2 bar is normal, and even lower on a very hot day is acceptable provided it rises instantly with revs. What is not normal is a gauge that is slow to rise from cold, flickers at idle, or needs real revs to reach 3 bar. Listen at start-up: a second or two of light rattle as the hydraulic chain tensioner pressurises is common on a car that has sat; a rattle that persists, or a slapping from the front of either bank, is chain and guide wear announcing itself, and it is dealt with in the problem areas because it is the one engine job that cannot be deferred.
Oil consumption tells its own story. A litre every 1,000โ1,500 miles on a high-mileage car is typical and usually valve stem seals โ a known, bounded job. Blue smoke on start-up after sitting, clearing within seconds, is the same seals. Blue smoke under load is rings or bores, and on an Alusil block that is a specialist engine rebuild conversation, not a top-end one.
Two cheap components cause a disproportionate share of M117 running faults. The camshaft oiler tubes โ plastic pipes clipped along each camshaft, fed by small plastic fittings โ go brittle with heat and age; when a fitting breaks, one end of a camshaft starves of oil and wears its lobes, turning a trivial parts bill into camshaft replacement. Any car without a record of the oiler kit being renewed is a car to budget it for immediately: the kit itself is inexpensive, the labour is cam covers off, and it is the best-value preventive job on the engine. The second is the set of rubber vacuum hoses and connectors around the intake, which harden, split and produce a hunting idle and hesitation that owners misdiagnose as injection faults for years.
The fuel system: KE-Jetronic
The 560SL uses Bosch KE-Jetronic (CIS-E): a continuous mechanical injection system with an electronic control layer for lambda feedback, idle control and cold running. Fuel is delivered by an electric pump package at the rear of the car โ pump, filter and accumulator clustered together under the floor near the axle โ to a fuel distributor on the engine, which meters fuel continuously to eight injectors through steel lines. System pressure is high, around 5.2โ5.5 bar, and the system's health is read with a pressure gauge, not by guesswork: any specialist diagnosis that does not start with system and control pressures is theatre.
The electronic layer centres on the electro-hydraulic actuator (EHA), the black unit bolted to the side of the fuel distributor, which trims the mixture under instruction from the ECU and the oxygen sensor. An EHA that weeps fuel from its body โ smell raw petrol at the distributor and look for dampness โ is failing, and replacement is a parts cost in the low hundreds plus setting up. The fuel distributor itself wears internally; the symptoms are uneven fuelling between cylinders, a car that will not take a clean mixture setting, and hard starting. A rebuilt distributor is roughly $900โ1,500 exchanged, and it is a job for one of the CIS specialists who flow-test them, not a general workshop experiment.
Three classic KE behaviours to recognise on a test drive, because each has a specific, affordable cause. Hot-start trouble โ cranking long after a 20-minute heat soak, then catching with a stumble โ is usually the fuel accumulator or the pump check valve letting rest pressure fall and the fuel in the lines vaporise; the accumulator is a few hundred dollars fitted and the test is a pressure gauge watching rest pressure after shutdown. A high or hunting warm idle is most often the idle control valve gummed with age, the idle control module, or the overvoltage protection (OVP) relay โ the relay with the fuse on top in the engine bay โ whose failure also brings the ABS light on and can make the car stall; a new OVP relay is cheap and should be your first purchase for any unexplained idle fault. A car that runs well cold and goes flat and rich warm is frequently a tired oxygen sensor or a coolant temperature sensor lying to the ECU, both cheap parts, before it is anything in the distributor.
Modern fuel is the background condition for all of this. Ethanol-blended petrol attacks the original rubber in the system and rots in the tank of a car that sits, varnishing the distributor and injectors. A 560SL that has been in regular use on fresh fuel is a fundamentally safer buy than a low-mileage car that has done 500 miles in a decade, whatever the odometer says โ on this model, use is preservation and storage is decay.
Gearboxes
Every 560SL has the same transmission: Mercedes' 722.3 four-speed automatic (the W4A 040 family), a torque-converter box with vacuum-modulated shift quality and a cable-operated kickdown and throttle-pressure linkage. There was no manual option at any price. The box is strong โ it handles the torque of the 5.6 in the much heavier sedans without complaint โ and its normal behaviours need learning so you do not condemn a healthy car. It pulls away in second gear by design; first engages only on full-throttle kickdown, or if you move the selector to the lowest position and back, the period trick for a first-gear start. Shifts at light throttle are early and soft; under power they should be firm, clean and without flare โ a rise in revs during the change, or a slide into the next gear, is wear, not character.
Judgement points on a drive: engagement of drive and reverse from rest should take a second or less, without a thump; a long delay into reverse on a cold box is the classic early warning of a rebuild ahead, realistically $2,500โ4,000 at a Mercedes specialist. Shift quality that is harsh at light throttle but fine under power usually traces to vacuum โ a split hose to the modulator, or the modulator itself โ and is cheap; shift quality that has been "adjusted" by winding up the modulator to mask flaring is a seller's trick that the test drive exposes within a mile. Fluid should be red and sweet-smelling; dark, burnt fluid in a box that still shifts well means a service now and a shortened life, and a fluid-and-filter service every 30,000 miles or so is the cheapest life-extension the car offers. The linkage matters too: worn selector bushes make the indicator lie about which range you are in, a trivial parts cost.
Behind the box, the propshaft has two flexible rubber couplings (flex discs) and a centre bearing, all of which perish with age rather than mileage; a cracked front flex disc is a genuine safety item, since a failed disc can let the shaft flail, and inspection is a torch-and-mirror job on a lift. The differential is the standard limited-slip unit with a 2.47:1 ratio; whine on the overrun points to worn bearings or a low oil level from a leaking pinion seal, and the limited-slip plates themselves rarely give trouble in road use.

Problem areas
The 560SL is a better rust prospect than most Mercedes of its era โ the late R107 shell was well protected by the standards of the time, and the car was expensive enough that many lived indoors โ but it is still a steel monocoque designed in the 1960s, and it has specific, known places where it dies. The pattern to hold in mind: on this car, rust is a targeted inspection, not a general fear, while rubber, fuel-system and climate-control ageing are certainties on every car. Budget for the certainties; hunt for the rust.
Rust: the map
The bulkhead and plenum. The single most expensive rust on an R107, and the check that matters most. Rainwater drains through the chamber in front of the windscreen โ the plenum that feeds the heater โ and the drain tubes block with leaves and debris. Water then sits in the chamber, rots the bulkhead from inside, and eventually leaks into the front footwells. The repair is windscreen out, dashboard out and fabrication, which is why a car with plenum rot can be mechanically lovely and still be a financial trap. The field test is simple: after rain or a wash, are the front carpets damp? Lift them anyway โ the underlay holds water long after the surface dries โ and look for the tide marks and rust staining at the base of the bulkhead inside the car. A seller who will not let you lift the front carpets has told you what you needed to know.
Front wings and headlamp surrounds. The front wings rot around the headlamp bowls and along their top inner edges where mud packs behind the lamps, and at the lower rear corner behind the front wheel. Press along the wing tops under the bonnet and look at the inner wing flanges; bubbling paint at the headlamp surround means the bowl behind it is worse. Wings bolt on, which makes replacement possible rather than fatal, but paint matching a metallic car is where the money goes.
Sills and jacking points. As on every Mercedes of the period, the sills are structural, they trap what the front wheels throw at them, and they rot from inside. The R107's ribbed sill cladding hides the lower sill from casual view, which makes the hands-on check more important, not less: press hard along the full length, examine the four jacking points, and be suspicious of fresh black underseal applied only to the sills. The factory jack test works here too โ the car's own jack engages each sill socket, and a sound sill lifts the corner silently. Sill repair sections exist; cutting out, welding and painting a side runs roughly $1,000โ2,500 depending on how far the rot has spread into the floor edge.
Floors, trunk and the soft-top well. The floor pans themselves are strong, but they collect whatever the plenum, the windscreen seal and the soft-top well send down. The folding roof stows in a well behind the seats under a metal cover, and that well has drains; blocked drains mean standing water, and standing water means rust in the well floor and the rear bulkhead behind the seats โ lift the roof out of the well (or stow it and look in with a torch) and check. In the trunk, the spare wheel well and the corners are the telltales, fed by the trunk seal and the rear lamp seals; and check the battery tray carefully, because on the R107 the battery lives in the trunk, and acid plus a steel tray plus forty years equals a hole that spreads into the trunk floor. Surface staining in any of these places is a clean-and-treat afternoon; perforation is panel work.
Arches, doors and mounting points. Rear wheel arch lips bubble where the inner and outer skins trap mud; door bottoms rot when their drain holes block, and you check them by running a fingertip along the bottom edge of each open door. Underneath, the places that turn a repair into a fabrication job are the front subframe mounting points on the shell, the rear subframe mounts and the spring seats.
Engine and cooling: the deferred-maintenance list
Timing chain guides. The 560's duplex chain itself is long-lived; the plastic guide rails it runs on are not. Age and heat cycles make the upper guides brittle, and a broken guide lets the chain slap and, in the worst case, jump timing on start-up โ on an interference engine, that bends valves and turns a running car into an engine rebuild. The preventive job โ upper guides, tensioner and tensioner rail, cam covers off, roughly $800โ1,500 at a specialist โ is due on any car without a documented chain service in its past, regardless of mileage, because the failure mode is age, not wear. Ask for the invoice by name. "The engine was serviced regularly" is not evidence the guides were done; they are a separate, specific job that appears as its own line on an invoice, and a seller of a genuinely sorted car will produce it.
Oil leaks. Expect seepage and price it honestly rather than emotionally. Valve cover gaskets harden and weep onto the exhaust manifolds (the burnt-oil smell after a drive), the front crank seal and oil pan gasket seep, the power steering pump and its hoses leak, and the oil cooler lines on the front of the engine perish. None of these is serious individually; together they are a weekend list and a few hundred dollars in parts. The leak that matters is at the rear of the engine โ a rear main seal is a gearbox-out job โ and a car leaving a real puddle rather than a spot needs its source identified before you agree a price.
Cooling. The system is conventional and marginal when neglected: a radiator that silts up, a viscous fan clutch that freewheels when it should drive, hoses and a water pump that are simply old. A healthy car holds a steady 85โ95ยฐC on the gauge in traffic with the auxiliary electric fan cutting in as it should. Creeping temperature at idle that falls with speed points to the fan clutch or a blocked radiator; temperature that climbs under load points to the radiator or water pump. Overheating is how M117 head gaskets die, and while head gaskets are not a routine failure on this engine, a car with an overheating history deserves a compression test and a hard look at the coolant for combustion staining. A full cooling-system refresh โ radiator, pump, hoses, thermostat, clutch โ is a known quantity at $1,200โ2,000 in parts and labour, and a fair deduction if the car needs it.
Mounts and ancillaries. Engine mounts collapse with age and oil contamination, letting the engine sit low and rock; the transmission mount and the two subframe mount kits go the same way, and together they are responsible for most of the driveline shunt and vibration that owners blame on the gearbox. The air conditioning compressor, alternator and power steering pump are all conventional and rebuildable. The air pump and emissions plumbing of the US specification should be present and connected โ a car with its emissions equipment stripped is a registration problem in states that inspect, and refitting it costs more than the performance it supposedly frees.

Suspension, steering and brakes
The front suspension is a double-wishbone layout carried on a steel subframe; the rear is Mercedes' semi-trailing-arm independent design, also on a subframe. Both are durable, both are carried in rubber that is now decades old, and the difference between a tight 560SL and a sloppy one is almost entirely the state of that rubber and the wear parts within it.
Subframe mounts. Front and rear subframe mounting bushes perish, crack and separate, and the symptoms โ vague straight-line stability, a clunk over bumps, a car that shifts its line under braking or power โ get blamed on everything else first. The mount kits themselves are inexpensive parts; fitting is a lift job, and a car that needs both ends done is a $800โ1,500 conversation at a specialist including the alignment it will need afterwards.
Wear parts. Ball joints, tie rod ends, the drag link and the idler arm bushings are all conventional, available and moderately priced; play is checked by rocking the wheels on a lift, and a full front-end refresh with quality parts is a known, bounded cost rather than a horror. The steering is recirculating-ball with power assistance, and it should be light, precise around the centre and free of groans. Excess centre play is often the steering box adjustment or a worn steering coupling before it is the box itself; a box that is genuinely worn is a rebuild item. Shock absorbers are conventional Bilstein-type units โ a car that floats, dives or crashes over sharp edges needs a set, roughly $600โ1,200 fitted for four, and the transformation in how the car feels is out of proportion to the cost.
Brakes. Four-wheel discs with standard ABS, and the parts are cheap and plentiful. The ageing pattern is hydraulic: perished flexible hoses, calipers with sticky pistons after long standing, a master cylinder that sinks the pedal slowly at a stop, and handbrake shoes inside the rear disc drums that nobody has adjusted since the Clinton administration. A full hydraulic refresh โ hoses, fluid, caliper rebuilds or replacements, discs and pads as needed โ runs $800โ1,800 and transforms the pedal. The ABS itself is reliable; a lit ABS warning lamp is most often the OVP relay (the same cheap relay behind half the idle faults on this car) or a wheel speed sensor with a damaged cable, and only rarely the hydraulic unit. Budget brake work into any car that has sat: on a stored car, assume the hydraulics need doing even when the pedal feels acceptable in the driveway.
Roof, interior, climate and electrics
The soft top. The canvas roof is a quality Sonnenland-type fabric on a substantial frame, and its condition is one of the big value drivers. Look for shrinkage (the top pulls tight and stresses its seams), a cloudy, cracked or split plastic rear window, fraying at the fold points and perished seals around the frame. A new canvas top fitted by a trimmer who knows the R107 frame runs roughly $1,500โ2,500; the rear window alone can sometimes be replaced for less, but on an old top it is money spent on a dying roof. Operate the top yourself on the viewing: it is a manual mechanism with catches at the windscreen header and pins at the rear, it should fold and stow under its cover without force, and the well it folds into should be dry and rust-free โ see the rust section. A top that needs two people and a vocabulary is telling you the frame is bent or the canvas has shrunk, and both are priced above.
The hardtop. Check the headlining for sagging and stains, the heated rear window element for continuity (a rear window that demists in stripes has broken tracks), and the rubber seals, which perish and are neither cheap nor trivial to fit well. The top is heavy โ a two-person lift or a hoist โ so a seller with a hoist or stand is a seller who used it; a hardtop that has sat on a garage floor for a decade usually has chipped edges and flattened seals to show for it.
Interior. The leather cracks at the driver's bolster and the seat pads beneath it collapse, giving the hammock sit that a cover in good condition can disguise โ sit in both seats and press the cushions hard. The dashboard top cracks in sun-state cars, and a cracked dash is a re-cover or replacement conversation, not a vinyl-repair one. Burl walnut veneer on the console delaminates and lifts at the edges, and the lacquer clouds; refinishing the set is specialist work at $800โ2,000, so a car with intact wood is worth a premium over one without. Carpets hide the floor story โ lift them, as the rust section insists. Seat heaters, where fitted, fail at the elements; the switches and relays are cheap, the elements are seat-out work.
Climate control. The automatic system is the car's most famously fiddly assembly, and it works by vacuum and 1980s electronics. The monovalve โ the electrically operated heater valve โ fails by tearing its diaphragm, giving no heat or uncontrolled heat; the repair kit is cheap and the job is an hour, so test the heat on every viewing, in summer too, exactly as you would on the W108. Behind the dashboard sit vacuum actuators (pods) for the flaps, and when their diaphragms perish the system blows air to the wrong places or only to the screen; replacing pods is dashboard-out labour, $1,200โ2,500 all-in, which is why a car with fully working climate โ correct air distribution, working centre vents, cold air conditioning โ is worth real money over one without. The push-button control unit develops solder-joint failures with age and is rebuildable by specialists. The air conditioning was charged with R12 originally; most cars have been converted to R134a by now, and a conversion done properly (flushed, new receiver-drier, correct oil) works well, while a conversion done with a top-up can and a prayer does not. Judge the air conditioning by its output temperature on a hot day, not by the seller's description of when it was gassed.
Electrics. The pattern is connection ageing, not wire failure. The OVP relay has already appeared twice in this guide โ idle faults and ABS lamp โ because it genuinely causes both; treat it as a service item. The cruise control amplifier develops the same solder-joint failures as the climate unit and is rebuildable. The VDO odometer gears crumble and stop the counter while the speedometer keeps working โ check that the trip and total counters actually advance on the test drive, because a frozen odometer poisons the car's mileage history and its value. Window regulators wear and slow; the Hirschmann power antenna sticks and bends its mast. A car in which every electrical item works โ windows, antenna, clock, cruise, heated rear window, seat heaters โ is a car that has been used and maintained, and that evidence is worth more than any single item on the list.


How to inspect one
Allow two hours, not one: a 560SL has two roofs, a climate system with a dozen behaviours to test and an underside that decides the car's fate, and none of it can be rushed. Bring a torch, a cloth-wrapped magnet, a tyre pressure gauge and a friend โ you need a second pair of hands for the hardtop and a second pair of eyes for the smoke check on start-up. If the car passes you, a lift inspection at a Mercedes specialist before money changes hands is the best money in the whole purchase; this is a heavy car whose important rust and rubber live underneath it.
- Start with the paperwork and the numbers. Match the VIN on the title to the plate and the stamping in the engine bay โ a US 560SL reads WDBBA48D and chassis type 107.048 โ and check the engine number begins 117.967. Ask for the data card or decode the VIN, and compare the paint and trim codes with the car in front of you. Then read the history file looking for three specific invoices: timing chain guides, fuel system work, and climate or vacuum work. A thick file without those three is a file of oil changes, and you should price the car accordingly.
- Cold start, watched from behind the car. Insist the engine is stone cold. It should fire at once, flare briefly and settle; your friend watches the exhaust for blue smoke (valve stem seals if it clears in seconds, worse if it does not) while you listen at the front of each bank for chain rattle that outlasts the first two seconds. A car that needs throttle to start cold, or cranks long, is showing you its fuel system before you have spent a cent.
- Idle, oil pressure and the OVP relay's fingerprints. Warm, the idle should sit steady around 650โ750 rpm with no hunting. The oil pressure gauge should peg at 3 bar with any revs and hold a healthy reading at hot idle. Check whether the ABS light behaves โ on with the ignition, out after start. A lit ABS light plus a rough or high idle is the overvoltage protection relay's signature, and knowing that turns a scary dashboard into a cheap relay and a negotiating point.
- The plenum and carpet test. Lift both front carpets and feel the underlay and the bulkhead base for damp, tide marks and rust staining โ this is the bulkhead rust check from the problem areas, and it outranks everything cosmetic. Look into the plenum chamber in front of the windscreen for leaf debris and standing water. Wet front footwells in a "garage-kept" car mean blocked drains and a bulkhead that needs a specialist's eyes before you proceed.
- Sills, floors and the jack test. Torch along both sills behind their cladding, press hard, and examine the four jacking points. If the seller permits, use the car's own jack in each sill socket in turn: a sound sill lifts its corner silently, a rotten one creaks and flexes. Prod the floor edges and the rear of the footwells. Perforation in sills or floors is structural money โ quantify it with a welder's quote, not a guess, before you negotiate.
- Trunk, battery and the soft-top well. Lift the trunk carpet and the spare wheel; look for water staining and rust in the well corners, then examine the battery tray and the floor beneath it for acid damage. Stow or raise the soft top and inspect its well for standing water, blocked drains and rust in the well floor. These three checks take ten minutes and cover the car's second rust front.
- Both roofs, operated by you. Raise and lower the soft top yourself: it should fold without force, the rear window should be clear and uncracked, the canvas unstretched at the seams. Fit the hardtop (with your friend) and check it seats evenly on its rear pins with even gaps, then remove it and check the headlining and the heated window. A car missing its hardtop, or with a torn top, carries a deduction you should apply in full โ replacements and refits are priced in the problem areas.
- Body and brightwork. Run the magnet over the sills, arch lips, door bottoms and the lower front wings; feel along every door's bottom edge for bubbling. Read the headlamp surrounds and wing tops for the rust described earlier, check the flat-face wheels for kerb damage and corrosion under the lacquer, and count the brightwork pieces that need rechroming or replacement.
- The test drive: gearbox first. Fifteen minutes minimum, including a freeway stretch. From rest, the automatic should engage drive and reverse within a second, pull away in second (correct behaviour), and change firmly without flare or slide. Use kickdown once from a cruise and feel for a clean downshift and strong, smoke-free pull to 4,500 rpm. Note any delay into reverse when cold โ it is the rebuild warning. At a steady cruise the car should track straight, hold top gear without hunting, and show a pegged oil pressure gauge.
- Suspension, steering and brakes on the move. Over bumps, listen for clunks from the subframe mounts and suspension joints; on a quiet road, rock the steering gently and feel for centre play and groans. Brake firmly from speed twice: the car should stop straight with a firm pedal that does not sink at the next traffic light. A pull under braking, a sinking pedal or a floaty, wallowing ride each map to a named job in the problem areas โ write them down with their costs while the seller can hear the arithmetic.
- Climate and electrics, every function. Whatever the weather: run the climate through every mode, check air comes from the correct vents, test the heat (monovalve) and then the air conditioning's output temperature. Work both windows, the mirrors, the antenna, the cruise control on the drive, the heated rear window if the hardtop is on, the seat heaters if fitted, and watch the odometer and trip counters for the whole drive โ they must advance. A frozen odometer reclassifies the car's mileage as unknown, permanently.
- Interior last, from the driver's seat. Sit in the driver's seat and press the cushion hard for collapsed pads under good leather; check the bolster wear, the dash top for cracks, the console wood against the light for lifting lacquer, and the carpets for the damp you may already have found from underneath. A sound, original interior is the hardest part of a 560SL to recreate at any price, so weight it as heavily as the bodywork โ and if the car has passed everything else, this is the step that decides between two otherwise equal cars.

Values
The market block beneath this guide carries the current listing figures and recorded sales for the 560SL, refreshed as the market moves. What follows here is how to read those numbers โ because on this model the spread between the cheapest and the dearest car is wide, and almost all of it is explained by four things: documented history, body condition in the specific places the problem areas describe, a working climate system, and completeness.
Start with the condition spread. The 560SL was built in large enough numbers that there is always a cheap one for sale somewhere, and the cheap ones share a profile: storage damage, dead climate control, a tired roof, no record of the chain guides being done, and an odometer that may or may not be telling the truth. The dearest cars are the opposite profile rather than a different specification โ remember that every 560SL left the factory with the same engine, gearbox and equipment, so unlike most classics there is no rare variant premium hiding in the range. What the top of the market pays for is a low, verifiable mileage, a history file with the expensive jobs already invoiced, both roofs in good order, and original paint in a desirable colour. Signal Red, black and white cars in fine condition consistently attract the strongest interest; the metallic browns, golds and blues have a smaller audience, which cuts both ways โ they are harder to sell and often cheaper to buy for exactly the same mechanical car.
Asking prices and achieved prices are different conversations on this model. The 560SL has a deep auction record, and auction results โ where two committed buyers set the price in public โ tend to sit below optimistic dealer and private asking prices for equivalent cars, sometimes by a wide margin on the mid-condition cars that make up most of the market. The exceptional, documented, low-mileage cars are the exception: those can exceed expectations at auction because several buyers want the same car. Use the recorded sales in the market block as your anchor and treat an asking price as an opening position, then negotiate with the inspection list: chain guides without an invoice, climate faults, a roof at the end of its life and old tyres are all specific, priced jobs, and sellers who know the model accept arithmetic as an argument.
The project-versus-driver gap is the other structural feature of this market. A non-running or long-stored 560SL looks temptingly far below a sorted driver, but the recommissioning path โ fuel system end to end, brake hydraulics, chain guides, rubber throughout, climate diagnosis โ is a known stack of jobs that closes most of that gap before the car turns a wheel, and it closes it at retail labour rates. The gap only works in your favour if you do the work yourself or the car is genuinely rust-free underneath its neglect.
Parts and ownership
The 560SL is one of the best-supported Mercedes of its generation, for three reasons: the R107 had an eighteen-year production run with a large US parc, the M117 engine and 722.3 gearbox are shared with the W126 sedans and coupes that Mercedes built in far greater numbers, and the factory's Classic Center continues to supply the model seriously. Almost everything that wears is available; what is genuinely scarce is cosmetic, and that is where purchase condition pays.
Easy: service items, filters, belts and hoses; brake discs, pads, calipers and hoses; suspension wear parts, subframe mount kits and shock absorbers; timing chain guide kits, tensioners and cam oiler kits; water pumps, radiators, thermostats and fan clutches; monovalve repair kits, OVP relays, oxygen and temperature sensors; ignition components; exhaust systems in standard form; soft top canvas from the specialist trimmers; tyres in the correct 205/65 VR 15 size from several makers. Most of this is order-today, fit-this-weekend, at prices in line with any quality European car of the era.
Harder and dearer: the KE-Jetronic fuel distributor and EHA (rebuilt units from CIS specialists, as covered in the engines section), climate vacuum pods and the push-button control unit (rebuildable, but dashboard labour dominates), dashboard tops in uncracked condition, burl walnut sets with intact lacquer, hardtop seals and headlinings, seat covers in the correct leather grain and colour, and brightwork in genuinely good order. None of it is unobtainable; all of it rewards buying a car that does not need it. A quality repaint on an R107 is a five-figure decision once the trim is off and the rust is honest, which is the arithmetic behind this guide's recurring advice to buy body and interior first and mechanics second.
Running costs. A sorted 560SL is a realistic regular-use classic. Expect fuel consumption in the mid-teens around town and the high teens on a freeway run, on premium fuel. Insurance is mainstream classic-car money for an agreed value. Any competent Mercedes independent can service the car โ the M117 and the 722.3 are bread-and-butter work for them โ but the KE-Jetronic rewards a specialist with the pressure gauges and the experience to use them, and finding that specialist is the single best ownership decision you will make. The budget line that catches new owners is the first year: catching up deferred maintenance on a running, driving car honestly runs $2,000โ4,000 before you improve anything, and recommissioning a car that has sat for years โ fuel system cleaned end to end, every brake component inspected, chain guides, all fluids, seals and tyres โ runs $4,000โ8,000 at a shop. Buy a car in regular use over a sleeping one, keep it in regular use yourself, and the 560SL is among the least temperamental classics of its era.
Which one to buy
- The all-rounder: any year, bought on condition. Because the specification never changed, the best 560SL is simply the best individual car your budget reaches โ documented chain guides, working climate, sound bulkhead and sills, both roofs. A superb 1986 beats a tired 1989 every day of the week.
- The value buy: a higher-mileage 1987 or 1988 with a real history file. Mileage frightens other buyers more than it should on an understressed M117; a car with 130,000 documented miles and the big jobs invoiced is a better car than a 70,000-mile car with a frozen odometer and no paperwork, and it is usually priced as though the opposite were true.
- The driver: a mid-mileage car in a quiet colour. The metallic blues, golds and browns carry a smaller audience and therefore a smaller price for the identical driving experience โ and the driving, torque-rich and unhurried, is the entire point of this car.
- The collector car: a 1989 with low verifiable miles, original paint and every document. The last year of an eighteen-year line, in the colours buyers queue for, with the data card matching the car. Verify the mileage ruthlessly โ the odometer gear failure described in this guide is exactly how ordinary cars acquire extraordinary mileages.
- The project: only if the shell is right. A stored car with a sound bulkhead, sound sills and a complete interior can make sense for a hands-on owner. A cheap car with plenum rot is not a project; it is a fabrication bill with a car attached.
And the rule that overrides all of the above: buy the car with the sound bulkhead, the documented chain guides and the working climate control, in the colour you can live with. The engine and gearbox will outlast you if you feed them oil and fluid; the roof, the wood and the vacuum pods are all fixable at prices you can plan for. The bulkhead is the one repair that costs more than the finished car forgives โ and it is the one thing about a 560SL that no amount of money makes original again.

See the 35 560sl cars currently listed.
