Mazda MX-5 Miata buyer's guide
Mazda MX-5 Miata -- the model's own buyer's guide: variants, values and what to check.
Years listed: 1990-2004 ยท Series: Miata
Overview and history
The Mazda MX-5 Miata is the car that saved the lightweight roadster. When it was unveiled at the Chicago auto show in February 1989, as a 1990 model, the affordable two-seat convertible had been dead for a decade โ killed off by safety legislation, emissions rules and the indifference of the big manufacturers. The British cars that invented the class were gone; the Lotus Elan that inspired the Miata had been out of production since 1973. Mazda, a comparatively small Japanese company, decided to build the car anyway: front engine, rear-wheel drive, a manual soft top you could raise from the driver's seat with one hand, and a twin-cam engine under a long bonnet. It was designed substantially in California, at Mazda Research and Development of North America under Tom Matano, engineered in Hiroshima under programme chief Toshihiko Hirai, and built at Mazda's Ujina plant in Hiroshima. The development slogan was jinba ittai โ horse and rider as one โ and for once the slogan describes the car accurately.
The formula never changed across four generations, and understanding that is the key to buying one. Every MX-5 โ Miata in North America, Roadster in Japan, MX-5 in Europe โ is a steel monocoque two-seater of around a tonne, with double-wishbone suspension, near-perfect weight distribution and modest power used completely. The first generation (NA, 1989โ1997) has pop-up headlamps and a 1.6-litre engine in its early years. The second (NB, 1998โ2005) is the same car matured: fixed headlamps, a stiffer shell, more power. The third (NC, 2006โ2015) grew up, gained a 2.0-litre engine and an optional folding hard top. The fourth (ND, 2016 onward) shrank back toward the original's weight and size. Total production passed one million in April 2016, making the MX-5 the best-selling two-seat sports car in history.
The cars in our listings pool, and the cars this guide concentrates on, are the NA and NB: model years 1990 to 2004 in the current pool, overwhelmingly manual โ three quarters of the pool cars are stick-shift, which tells you who buys these cars and how they are used. The NC and ND are covered here in orientation, because a buyer cross-shopping generations needs to know where the later cars differ, but the forensic detail โ the rust map, the crankshaft check, the drain tubes โ belongs to the first two generations, which are the classic-era cars now and the ones where condition varies from concours to scrap at the same asking money.
Why did it succeed where everyone else failed? Because Mazda engineered out the classic roadster's vices while keeping its virtues. The top does not leak when maintained. The engine is a durable, mass-production Mazda four-cylinder that starts on the button in January. The electrics work. What remains is the virtue: a car light enough to steer with your fingertips, geared short enough to use all of its performance on a public road, and simple enough that a competent home mechanic can do nearly everything on it. That is also why the buying decision is never about finding one, but about finding one whose body, top and maintenance history are honest. The mechanicals are the cheap part of a Miata. They always were.
One more piece of orientation. Miatas were sold in huge numbers to people who used them as ordinary cars, so the market contains everything: one-owner garaged cars with full records, commuter cars with 200,000 miles, autocross and track cars, turbo and V8 conversions, and rust-belt cars whose sills are held together by the paint. Mileage alone tells you almost nothing: a 60,000-mile car that lived outside in Ohio can be a worse buy than a 160,000-mile Arizona car with a service book. Read the car, not the odometer.

The models
Four generations, one recipe โ but the differences between them matter, and within the NA and NB there are engine, differential and trim changes that separate the cars to hunt from the cars to merely accept. Outputs below are the period US-market figures; production totals are worldwide generation totals as published by Mazda, shared across the variants of each generation.
| Model | Years | Engine | Output | Built | Character |
|---|---|---|---|---|---|
| NA 1.6 | 1990โ1993 | 1.6 B6-ZE twin-cam | 116 hp | NA total 431,506 | The purest Miata; light, revvy, viscous LSD option |
| NA 1.8 | 1994โ1997 | 1.8 BP-ZE twin-cam | 128 hp | NA total 431,506 | Stronger everywhere; Torsen LSD available; the NA to use daily |
| NB 1.8 (early) | 1999โ2000 | 1.8 BP-4W twin-cam | 140 hp | NB total 290,123 | The mature car; better head, stiffer shell, fixed lamps |
| NB 1.8 VVT | 2001โ2005 | 1.8 BP-Z3, variable valve timing | 142 hp | NB total 290,123 | The most refined NB; six-speed option; watch the front frame rails |
| Mazdaspeed Miata | 2004โ2005 | 1.8 BP turbo, intercooled | 178 hp | about 5,400 over two years | The factory turbo car; the collectible NB |
| NC 2.0 | 2006โ2015 | 2.0 MZR twin-cam | 166โ170 hp | NC total 231,632 | The grown-up car; folding hard top (PRHT) from 2007 |
| ND 2.0 | 2016 onward | SkyActiv-G twin-cam | 155 hp, 181 hp from 2019 | line passed 1,000,000 in 2016 | Back to basics; RF fastback from 2017 |
The NA 1.6 (1990โ93). The launch car, and the lightest production Miata at roughly 2,100 lb. The 1.6 is the sweetest engine of the early cars โ it revs to its redline with an enthusiasm the 1.8 never quite matches โ but it carries the two known traps covered in the engine section: the short-nose crankshaft on 1990 and early-1991 cars, and the small, weaker 1.6 differential. Trim was simple: base cars, an A Package (power steering, leather-wrapped wheel, alloys), a B Package (cruise, power windows, headrest speakers), and the C Package with leather from 1992. Air conditioning and a limited-slip differential were stand-alone options, and the LSD on a 1.6 car is a viscous unit whose fluid cannot be serviced โ most behave as open differentials by now, whatever the option list says.
The special editions are an NA/NB institution, and they matter because they carry the colours and interiors collectors pay for. The 1991 Special Edition put 4,000 cars in British Racing Green with tan leather โ the most sought-after ordinary NA. The 1992 Black Miata (black over tan) and the Sunburst Yellow cars are rarer still. The 1993 Limited Edition โ black over red leather, 1,505 cars, with Bilstein dampers โ is the connoisseur's early car. From 1994 to 1997 the annual M Edition (Merlot, Montego Blue, Starlight Blue and Twilight Blue across the years, all with tan leather and every option) is effectively the flagship NA. None of these is mechanically exotic; you are paying for colour, leather and originality, so verify the car is what its badge claims โ the VIN and the original build records settle it, not the seller's description.
The NA 1.8 (1994โ97). The 1994 re-engine is the significant one: 1,830 cc, 128 hp, a stronger seven-inch differential, bigger brakes, added chassis bracing and a Torsen limited-slip in the popular-equipment packages. This is the NA that tolerates modern traffic and modern gearing best, and the one most buyers should target. The 1996 cars went OBD-II; the 1997 is mechanically identical and often the cheapest way into a 1.8, because it lacks the early cars' first-of-the-line cachet.
The NB (1999โ2005 in the US). Mazda kept the platform and the wheelbase, restyled the body with fixed headlamps (pop-ups could no longer meet pedestrian and lighting expectations), stiffened the shell, widened the track slightly and fitted the BP-4W engine with a much better-flowing cylinder head โ solid lifters in place of hydraulic, a variable intake system, 140 hp. The cabin gained a glass rear window option in the top and a proper wind blocker. For 2001 the BP-Z3 added variable valve timing on the intake cam and the rating became 142 hp โ after a famous embarrassment in which the 2001 car was first advertised at 155 hp, a figure Mazda could not substantiate; it corrected the rating and offered affected owners compensation up to and including buyback. If a seller quotes 155 hp for a 2001 car, you are hearing the corrected myth, not the specification. The six-speed manual (an Aisin unit) arrived as an option on highly specified cars and became common on special editions: the 1999 10th Anniversary (Sapphire Blue, six-speed, Torsen, individually numbered, 7,500 built worldwide), the 2000 Special Edition (Mahogany over tan, six-speed) and the 2003 Shinsen and Club Sport cars all orbit the same formula โ colour, leather, six-speed, Torsen.
The Mazdaspeed Miata (2004โ05) is the NB's factory flagship: a turbocharged, intercooled 1.8 making 178 hp, a six-speed, a Torsen, Bilstein dampers, 17-inch Racing Hart wheels and a body kit. Production was cut short by a fire at the port facility storing finished cars, which is why the 2005 run is short and the colours are few (Velocity Red and Black Mica for 2004; those plus Lava Orange and Titanium Grey for 2005). It is the only forced-induction MX-5 Mazda sold in this era and the NB the collectors have settled on.
NC and ND in brief. The NC (2006) moved to a platform sharing components with the RX-8, a 2.0-litre MZR engine, and more room and weight โ about 2,450 lb. The 2007 PRHT power retractable hard top is the version most buyers want; the 2009 facelift brought a forged, higher-revving engine. The ND (2016) reversed the growth: back under 2,350 lb in US trim, a 2.0 SkyActiv engine, electric power steering, and the 2017 RF retractable fastback. Both are modern used cars to buy on service history rather than classics to buy on archaeology โ the rest of this guide returns to the NA and NB.


Engines and gearboxes
The 1.6: B6-ZE
The B6-ZE is a 1,597 cc iron-block, alloy-head twin-cam four, developed from the 323/Familia engine family: 116 hp at 6,500 rpm, 100 lb-ft of torque, electronic fuel injection, and ignition triggered by a cam angle sensor at the back of the exhaust cam. It is a short-stroke, oversquare engine that wants revs and tolerates them indefinitely if the oil is clean. Hydraulic lash adjusters keep the valve clearances silent when fed good oil at sensible intervals; starved of oil changes they gum up and produce the famous Miata lifter tick โ a top-end rattle at start-up that usually fades as pressure builds. Persistent tick on a warm engine with fresh oil of the right grade is a set of lifters, not a death sentence, and it is a negotiating point rather than a walk-away.
Two 1.6-specific items deserve their fame. The first is the short-nose crankshaft. Cars built for the 1990 model year and into early 1991 have a short crank nose with a small woodruff key locating the timing pulley; the later long-nose crank is identified by the eight-bolt crank pulley against the early car's four bolts, and by engine number. If the crank bolt on a short-nose car is disturbed and not torqued correctly with thread-lock โ 81โ87 lb-ft is the specification โ the key frets, the keyway wallows out, timing wanders, and the car develops a wobbling crank pulley and eventually a ruined crankshaft nose. The repair spectrum runs from the well-known Loctite 660 keyway repair (a few hundred dollars in parts and care) to a replacement engine. On any 1990 or 1991 car, watch the crank pulley for wobble at idle and ask whether the nose has been inspected or repaired.
The second item is the cam angle sensor O-ring at the back of the head: it hardens, leaks oil down the back of the engine onto the heater hoses, and the oil swells and bursts the hoses โ a failure that presents as coolant loss and gets misdiagnosed as a head gasket. A sensor O-ring costs almost nothing; the heater hoses it destroys cost more, and the overheating that follows a burst hose is what actually kills these engines. Look for oil weeping at the back of the cam cover on every car, and feel the heater hoses where they pass under the sensor: soft, swollen rubber there is the tell.
The timing belt is a 60,000-mile service item, and the B6 (like the BP) is a non-interference engine: a snapped belt strands you but does not bend valves. That fact shapes the economics โ a car with an overdue belt is a service bill, not a gamble with the engine's life. A full belt service with water pump, tensioners, front seals and coolant runs roughly $600โ1,100 at an independent shop, and documented recent belt work is worth paying for because the water pump is reached in the same strip-down.
The 1.8: BP-ZE, BP-4W and BP-Z3
The 1994 BP-ZE grew the block to 1,830 cc, kept the iron block and alloy head, and made 128 hp with a fatter mid-range that transformed motorway usability. It kept hydraulic lifters and the cam-sensor arrangement, with the same O-ring caveat. From 1996 the engine management went OBD-II, which matters at inspection time in emissions states: a check-engine light on a 1996-onwards car is a test failure and a diagnostic session, not a piece of tape over the lamp.
The 1999 BP-4W is the engine the specialists rate highest of the naturally aspirated BPs. The cylinder head was redesigned with straighter, higher-flowing ports and solid (shim-adjusted) lifters in place of the hydraulics, the intake gained a variable-length system (VICS), and output rose to 140 hp with a cleaner top end. Solid lifters remove the tick problem entirely and replace it with a valve-clearance check that is rarely needed in practice. The 2001 BP-Z3 added variable valve timing (VVT) on the intake cam โ an oil-pressure-actuated phaser on the cam nose โ for 142 hp and a broader spread of torque. The VVT actuator can weep oil and its control solenoid can fail, but the system is fundamentally reliable; what it adds is one more thing to verify with a scan tool on a car with a rough idle.
Common BP behaviour to read correctly on a test drive: oil consumption rises with age as valve stem seals harden โ a puff of blue smoke on start-up after sitting, or on the overrun after a long descent, is stem seals (a job a home mechanic can do in place, a few hundred dollars in parts); continuous smoke under load is rings and bore wear, and that is a rebuild, or a good used engine fitted at roughly $2,500โ4,500. The coil pack on 1994โ97 cars sits at the back of the head and fails with heat and age, giving a misfire that comes and goes. Ignition leads on all of them are a consumable โ a car that misfires under load in damp weather usually needs leads, not an engine.
The later engines: MZR 2.0, SkyActiv and the Mazdaspeed turbo
The NC's MZR 2.0 is an all-alloy, chain-driven engine making 170 hp in early US cars (166 hp under the revised SAE rating from 2007). The 2009 facelift engine gained forged internals and a higher redline. Timing chains remove the belt service; the known items are thermostat housings and coolant expansion tanks that yellow and crack with age โ replace the tank preventatively, because a split tank overheats the engine quickly. The ND's SkyActiv-G 2.0 is a high-compression (13:1) direct-injection engine: 155 hp in 2016โ18 cars, 181 hp in the revised 2019-onwards version. Direct injection brings intake-valve carbon over high mileages; no widespread failure pattern has emerged. The 1.5 SkyActiv sold in other markets was not offered in the US.
The Mazdaspeed Miata's BP is a factory turbo installation: an IHI turbocharger with a small front-mount intercooler, lower-compression pistons, an uprated clutch and extra cooling, making 178 hp and 166 lb-ft. It is not the same as the aftermarket turbo conversions that fill the classifieds โ it was engineered, emissions-certified and warrantied by Mazda, which is precisely why the cars hold their premium. The checks are turbo-car checks: smoke on boost or at idle suggests turbo seals (a turbo rebuild or replacement runs roughly $900โ1,800), heat management under the bonnet is harder on hoses and wiring, and any car with raised boost, a replaced intercooler or a reflashed ECU should be priced as a modified car, not a factory one. Originality is the whole value proposition.
Gearboxes and drivetrain
The standard gearbox across NA and NB is Mazda's five-speed manual โ a light, precise unit with one of the great gearchanges of any era. It should slot home with fingertip pressure, cold or hot; notchiness on second gear when cold that disappears warm is usually old oil (the box takes 75W-90 GL-4, and the wrong oil degrades the synchromesh feel), while a box that crunches second or third warm, or jumps out of gear, needs a rebuild at roughly $1,200โ2,200 for an exchange unit fitted. Two cheap items transform a tired-feeling change and are missed constantly: the shifter turret has its own small oil supply that dries out or leaks away, and the two rubber shifter boots tear with age, letting heat and noise into the cabin and making the lever feel vague. A boot-and-oil refresh kit is well under $100 in parts and an hour's work โ a sloppy, hot, noisy lever is probably this, not a gearbox verdict.
The six-speed Aisin box fitted to high-spec NBs, the Mazdaspeed, and later standard across NC and ND, is stronger and closer-stacked, with a heavier, more deliberate action that divides opinion; it is the desirable box for turbo and high-power cars. Clutches are light and long-lived in road use โ 100,000 miles is unremarkable โ and the classic failure is not the friction plate but the clutch slave cylinder, which leaks at the side of the bellhousing and announces itself as a sinking pedal and a falling level in the shared brake and clutch reservoir. The part is cheap (under $50) and the job is an hour.
The four-speed automatic fitted to NA and NB cars is a durable unit that saps the car's point entirely; automatics are worth less, sell slower, and are bought by a different audience โ our pool runs three-to-one manual for a reason. The NC offered a six-speed automatic with paddles and the ND a six-speed automatic, both competent and both a discount against the manual equivalent.
At the back, the differential is the drivetrain item to identify before you buy. The 1.6 cars use a small six-inch ring-gear differential that is genuinely weak โ hard launches and turbo power break them โ with an optional viscous limited-slip whose silicone fluid is sealed for life and degrades with age and heat; by now most viscous units behave as open diffs. The 1.8 cars moved to a seven-inch ring gear and the optional Torsen limited-slip (Type 1 on 1994โ95 cars, Type 2 thereafter), a gear-type unit that does not wear out and is the single most desirable drivetrain option on an NA or NB. To identify one: with both rear wheels off the ground and the gearbox in neutral, turn one wheel โ on a Torsen the other wheel turns the same way; on an open diff it turns the opposite way; a viscous car can mimic the Torsen result, so corroborate with the car's original specification. All of these cars use Mazda's Power Plant Frame, an aluminium spine connecting gearbox and differential that keeps the drivetrain aligned; after any clutch or gearbox work the frame must be realigned to its specified height, and a car with driveline shunt or a vibration that arrived after clutch work is usually a misaligned frame, not a failing box.

Problem areas
A Miata rarely dies mechanically. The engines are understressed, the gearboxes are strong, and almost every wear part is cheap. What kills these cars โ what separates the car you should stretch for from the car you should walk away from at any price โ is rust in two specific places, water management, and the accumulated neglect of a car that was cheap for a long time. Work through the problems in that order: body first, then the top and its drains, then the mechanical wear items, then the chassis and electrics.
Rust: the map
Miata rust follows the water, and the water follows the drains. The car has drain holes at the bottom of each rocker panel (sill) and drain tubes from the soft-top well that exit behind the seats; when the drains block with leaves and road dirt โ and on a car that lives outside, they always eventually block โ water sits inside the structure and rots it from within. Learn the map:
Rear rocker panels. The single most important check on an NA or NB. The section of rocker immediately ahead of each rear wheel rusts from the inside out, because it is where the top-well drains deliver their water and where the inner structure traps it. By the time blisters appear in the paint ahead of the rear arch, the inner sill and the end plate behind it are usually holed too. Press hard along the rocker, look inside the rear wheel arch at the sill end, and be suspicious of fresh black underseal or stone-chip paint in exactly this area โ it is the classic cover-up, applied the week before the sale. Proper repair means cutting out the outer rocker, repairing the inner structure, and welding in new metal: roughly $800โ1,800 per side at a body shop, done well. A car needing both sides, on top of other work, is a project car and must be priced as one.
NB front frame rails. The NB's specific structural trap, and the one that ends more NBs than any other. The front chassis legs (the rails that run under the engine bay, carrying the front subframe) are made of layered, sandwich-section steel that traps moisture between the layers and rusts from the inside. The outside can look merely scabby while the layers are separating and the rail is losing its strength โ in markets with safety inspections these rails are a known failure point, and the repair requires cutting the rail open, replacing the rotted layers and welding in repair sections: roughly $1,000โ2,000 per side fitted, with repair panels readily available. On any NB, get under the front of the car with a torch and a screwdriver and prod the rails along their full length, especially around the subframe mounts and the anti-roll bar brackets. Soft, flaking, laminated metal here is the closest thing an NB has to a walk-away fault โ not because it cannot be fixed, but because sellers rarely price it in. The NA's front rails are a simpler, single-skin design and far less prone, though they still rust at the very front around the bumper mounts.
The rest of the map. Rear wheel arches bubble at the lip where the arch meets the rocker โ check the whole circumference with your fingertips. The windshield frame on NAs rusts around the screen seal, worst at the top corners; bubbling at the header rail means the screen comes out to fix it properly. The trunk floor and battery tray rust from inside when the trunk seal or the rain rail leaks โ lift the trunk carpet and look at the floor and spare wheel well. Floor pans rust where the drain tubes have been dumping water into the cabin instead of out of it (see below) โ lift the carpets behind the seats and feel for damp and scale. Front wings rot at the bottom rear edge behind the front wheels, where mud packs between wing and sill. None of these is individually fatal, but a car showing several has lived wet, and wet cars hide the worst rust where you have not looked yet.

The soft top, the rain rail and the drains
The top is the Miata's defining component and its most predictable expense. The original vinyl top lasts seven to ten years in outdoor use before the material stiffens, the stitching rots and the plastic rear window (NA and early NB) yellows, cracks and splits along its fold. Glass-window tops (optional on NB, standard later) age better, though the glass can delaminate from the fabric. A replacement top in vinyl, fitted, runs roughly $800โ1,500; canvas (the premium material, standard on many special editions) runs $1,200โ2,000 fitted. A home mechanic can fit one in a weekend โ it is fiddly rather than difficult โ which makes a tired top a negotiating point rather than a catastrophe. What you are really inspecting is what its condition tells you: a car whose top has been left split and leaking has been filling with water, and the bill for that is in the rust section, not this one.
The mechanism matters more than the material. The top's rear edge attaches to the body through the rain rail, a plastic gutter that channels water to the drain tubes. Rain rails crack with age, and a cracked rain rail pours every rainstorm directly into the body structure behind the seats โ this, more than anything, is how rocker panels rot. If a car has had a new top fitted, ask whether the rain rail was renewed at the same time; a new top on a cracked rail is a job half done. The two drain tubes run from the top well down through the body and exit just ahead of the rear wheels; they block with debris, and the overflow goes into the sills and the cabin floor. Clearing them is a five-minute job with a trombone brush or a length of soft wire from below โ and a car whose drains have clearly never been cleared is a car to inspect underneath with extra care. Inside the cabin, check the parcel shelf carpet and the area behind the seats for damp and mould smell, and check the ECU's neighbourhood: on NBs the engine ECU lives in the passenger footwell, and water from a blocked air-conditioning evaporator drain or a leaking top can reach it. A car with intermittent electrical gremlins and a damp footwell is telling you one story, not two.
The optional detachable hardtop transforms the car โ quieter, stiffer-feeling, weatherproof โ and has become a valuable accessory in its own right, worth a substantial premium on any car that includes one, provided the seals, headlining and rear-window demister are intact. Check its rear latches and mounting bolts, and check the soft top folded underneath it: hardtops hide neglected soft tops for years at a time.
Latches and seals complete the picture. The two front top latches wear and lose their snap; a top that whistles at speed usually needs latch adjustment or new latch internals, cheap in parts. Door and top seals perish and are all available; a full seal refresh is a few hundred dollars in parts and transforms a leaky car. Water in the footwells is not charm โ trace it before you buy, because every leak on this car ends at metal.
Engine and cooling-system wear
Beyond the generation-specific items in the engine section, the wear pattern on a high-mileage B6 or BP is consistent. The radiator is the first cooling item to judge: the original has plastic end tanks that turn from black to a greenish brown as the plastic ages and embrittles, and a brown tank is a radiator on borrowed time โ replacement is cheap (an all-aluminium aftermarket radiator is a popular upgrade at roughly $250โ450 in parts) but a car that has overheated even once needs its head gasket interrogated. Head gaskets themselves are not a weakness on these engines; they fail as a consequence โ of overheating, of a burst heater hose, of a failed water pump โ so treat any overheating story as a head-gasket question and look for the evidence: emulsion under the oil filler cap, bubbles in the expansion tank with the engine running, a cooling system that pressurises hard from cold. A compression or leak-down test settles it and is cheap insurance on any car with a cooling-system past.
Oil leaks are the norm rather than the exception, and most are cheap: the cam cover gasket hardens and weeps (a gasket set and an hour), the sensor O-ring described earlier, front crank and cam seals (done with the timing belt). Budget a seal refresh into any car without recent invoices and the leaks stop being a concern. Water pumps are replaced with the belt as a matter of course; a car with a documented belt but no pump is a small question mark. The thermostat sticks with age and the heater goes lukewarm before the gauge misbehaves โ a car that warms up slowly usually needs a thermostat, not a heater matrix. On NB cars, non-working air conditioning is usually a rotted condenser or a leaking pipe union โ a few hundred dollars โ rather than the compressor. The exhaust manifold on 1.8 cars cracks occasionally and ticks when cold; aftermarket manifolds are cheap and plentiful.
Suspension, steering and brakes
The Miata's double-wishbone suspension at both ends is fully adjustable, and that is both its genius and its trap. Alignment is set by eccentric bolts at the inner wishbone pivots, and on a car that has lived in a salt state those eccentrics seize solid in their bushes. A car that cannot be aligned cannot be made to handle properly, and freeing seized eccentrics can mean cutting out and replacing bushes and bolts โ a few hundred dollars per corner in the worst case. On the test drive, a car that wanders, tramlines or wears its front tyres unevenly is either out of alignment (cheap, if the eccentrics move) or hiding seized hardware. Ask when it was last aligned; a recent alignment sheet from a specialist is a genuinely valuable document on these cars.
Wear items are conventional: ball joints and track-rod ends last well but are now old on every NA and NB; rubber bushes perish and soften, and a full bush refresh runs roughly $600โ1,200 in parts with labour on top, and transforms a loose car. Dampers are the most commonly neglected item โ the originals were soft by 60,000 miles, and a car on tired dampers pitches and floats in a way owners mistake for character. Quality replacement dampers are $400โ900 a set in parts. The NA's famous 65 mph shimmy โ a steering shake at motorway speed โ is usually wheel balance or a slightly buckled wheel on a car exquisitely sensitive to both, cured by a proper road-force balance; it is not a structural fault, but a car whose owner never cured it is a car whose owner tolerated faults.
Brakes are simple discs all round (the 1.8 cars and Sport-package NBs have larger front discs) and cheap to renew completely, but check the rear calipers for seized handbrake mechanisms, the classic Miata brake fault: the handbrake lever on the caliper seizes, the handbrake goes weak or one rear brake drags and overheats. Rebuilt calipers are inexpensive. Flexible hoses perish; braided replacements are a common and sensible upgrade. Power steering (fitted to most US cars) is rack-and-pinion and reliable; leaks come from the pump seals and the high-pressure hose. Manual-steering NAs exist and are prized by purists โ heavier at parking speed, purer at road speed.
Interior, electrics and the small stuff
Interiors are hard-wearing but now old. The NA's dashboard cracks in sun states, worst around the passenger airbag area on 1994-onwards cars; uncracked dashes are getting scarce and a dash swap is a full day's labour. Seat foams collapse on the driver's bolster and the covers split along the same seam โ retrim kits in vinyl or leather are widely available (a quality leather kit runs roughly $700โ1,200 in parts), and a tidy original interior is worth paying for precisely because retrimming is the one job where parts plus labour add up. The NA's tombstone centre panel and the NB's console plastics go brittle; clips break when panels are removed, which is why so many modified cars have rattling trim.
Electrics are the Miata's strength, with a short list of known exceptions. NA pop-up headlamp motors wear their linkages; a lamp that winks or rises slowly needs linkage bushes or a motor, all available used. Electric window regulators slow with age as the cables fray and the guides gum up โ a window that crawls or tilts is a regulator strip, clean and re-grease (cheap) or a replacement assembly (moderate). The ignition switch on high-mileage cars wears and can cut the engine over bumps โ a frightening symptom with a cheap cause. NB immobiliser faults can strand a car with a flashing key light; the fix is usually the key, the ring antenna or corroded connections rather than the ECU. On all cars, check that the warning lights illuminate and extinguish as they should โ on a 1996-onwards car, a missing check-engine bulb is a seller's trick as old as OBD-II itself.
Finally, read the car's modifications as evidence. A standard car on standard wheels with a folder of invoices is the market's favourite for a reason. Quality upgrades from the known specialists (suspension, braces, a roll bar properly mounted to the structure) suggest an engaged owner. Cut springs, a welded differential, a cheap turbo kit with no engine management, or drift scars on the rear quarters describe a car used as a consumable โ and a welded diff reframes every other judgement you make about the drivetrain and the shell.

How to inspect one
Allow an hour, bring a torch, a small magnet and overalls or a mat for getting underneath โ on a Miata the inspection is won or lost at ground level. Insist on a cold engine when you arrive. If the car passes you, a lift inspection at a specialist is cheap and settles the NB frame rails and the rockers definitively.

- Paperwork and identity first. Match the VIN on the title to the plate at the base of the windshield and the stampings on the body. Check the model year against the car's equipment โ a 1994-onwards car should have the 1.8 and dual airbags; a car badged as a special edition should have the colour, interior and equipment the edition specifies. A thick history file with timing-belt and alignment invoices is worth real money on these cars.
- Cold start. The engine should fire at once and settle to a clean idle. On a hydraulic-lifter car (NA and 1999โ2000 engines aside, which are solid-lifter) a second or two of lifter tick is normal; ticking that persists warm is a point to price. Watch for a puff of blue smoke at start-up (stem seals) and listen for any rattle from the front of the engine.
- The crank pulley check (1990โ91 cars). With the engine idling, watch the crank pulley from above: any visible wobble on a short-nose car is the keyway problem from the engine section announcing itself. Ask whether the nose has been inspected, and look for the invoice. No wobble and a documented belt job closes the question.
- Rockers and arches. Crouch at each rear wheel and press hard along the rocker panel ahead of it, then look inside the arch at the sill end with the torch. Blistering, softness or fresh underseal in this exact spot is the rust section's main event. Run a fingertip around both rear arch lips and check the front wings behind the front wheels.
- Underneath: NB frame rails, floors, drains. On an NB, prod the front frame rails along their length โ flaking, laminating metal is the generation's walk-away fault unless the price already reflects the welding. On any car, look at the floor pans, check the drain-tube exits ahead of the rear wheels are clear, and read the underseal: patchy and old is honest; fresh and uniform over the rockers is a question.
- The top and the water path. Raise and lower the top: it should fold in one motion and latch without slamming. Inspect the material for splits at the folds, the rear window for cracks or clouding, and the rain rail where the top meets the body. Feel the carpets behind the seats and on the parcel shelf for damp, and smell for mould. Check the trunk floor and battery tray while you are at the back.
- Engine bay details. Read the radiator's plastic tanks: black is healthy, brown and crazed is a replacement due. Look for oil at the back of the cam cover (the sensor O-ring) and feel the heater hoses for swelling. Check the oil itself โ level, colour, and any emulsion under the filler cap โ and the coolant for oil or rust colour.
- The differential test. If the car is claimed to have a Torsen, verify it: rear wheels off the ground, gearbox in neutral, turn one wheel and watch the other โ same direction suggests a limited-slip, opposite direction means an open diff whatever the advert says. While you are there, check for play and leaks at the diff and listen for whine on the drive.
- The test drive. Fifteen minutes minimum, including a motorway stretch. The gearchange should be light and precise; a sloppy, hot lever is usually shifter boots and turret oil, not the box. Feel for the 65 mph shimmy, listen for wheel bearings and diff whine, and brake firmly from speed โ the car should stop straight with no pull. A soft or sinking clutch pedal points at the slave cylinder.
- Suspension and steering on the move. Find a rough surface: knocks are ball joints, links or tired dampers; wandering and tramlining point to alignment โ and to whether the alignment eccentrics are free, which you should ask about directly. The steering should self-centre cleanly and weigh up evenly both ways.
- Heat, electrics and the small stuff. Let the car idle hot and watch the temperature gauge sit steady. Work everything: both windows (slow or tilting means regulator work), the pop-ups on an NA through several cycles, lights, wipers, heater fan on all speeds, air conditioning if fitted, and every warning light on and off as it should. On a 1996-onwards car, plug in a code reader if you have one.
- Stance and structure last. Stand back and look down each flank for ripples and mismatched paint, and check the car sits level. Then sit in both seats, feel for collapsed foam, and weigh the interior honestly: it is the part you look at every mile, and a full retrim costs more than most of the mechanical jobs in this guide combined.
Values
The build's market block beneath this guide carries the current numbers โ the listings, the recorded sales and the spreads โ so what follows is how to read them for this car. The Miata market is a condition market far more than a mileage or rarity market, and its first law is that the spread between the best and worst example of the same model year is wider than the spread between model years. A superb 1992 and a tired 1997 are not close in value, whatever the year-by-year charts suggest.
The premiums are consistent and explicable. Original, unmodified cars with documented history sit at the top, and the premium has been growing as modified and used-up cars thin the supply of honest ones. Within the NA, the special editions carry the colour premium โ British Racing Green over tan above all โ and a factory hardtop included in the sale adds real money to any car, because hardtops trade separately and good ones are scarce. The Torsen differential, the six-speed gearbox on NBs and the Mazdaspeed badge all price in. The Mazdaspeed is its own market: the only factory turbo car, built briefly, and priced on originality above everything โ a modified Mazdaspeed loses the very thing its buyer is paying for.
The discounts are equally consistent. Automatic cars sit below manuals of identical condition and take longer to sell; our own pool runs three manuals to every automatic, and the demand ratio is more lopsided than the supply. Rust is the biggest single discount and the most commonly under-declared: a car needing both rockers and, on an NB, frame-rail work has a four-figure welding bill in its immediate future, and the market prices that in only when the buyer spots it โ which is the entire purpose of the inspection section above. High mileage, by contrast, is a mild discount on a car with records: these engines do not wear out on schedule, and the market knows it. Track history, cheap turbo conversions and welded differentials move a car into the project bracket regardless of how it photographs.
The project-versus-driver gap is the widest divide of all. A running, honestly presented car with a tired top and cosmetic faults is a usable classic from the day it arrives; a non-running project needs the top, the belt service, the brakes, the tyres and usually the welding before it turns a wheel, and the sum of those bills routinely exceeds the gap between project money and driver money. Sellers' asking prices on the best cars are often close to achieved prices, because the audience for a truly good NA or NB is large and patient; at the bottom of the market, asking prices are fiction and negotiation is expected.
Parts and ownership
The Miata is one of the best-supported classics in existence, for a simple reason: Mazda built a million of them, the enthusiast base is enormous, and the car has been raced in anger for thirty-five years. Spec Miata โ the single-make racing class built around the NA and NB โ is one of the largest amateur racing classes in North America, and a racing class is a parts pipeline: engines, gearboxes, suspension components and body panels stay in production or in stock because racers consume them.
Easy: everything consumable. Filters, plugs, leads, belts, brake discs and pads, calipers, dampers, bushes, ball joints, radiators, water pumps, thermostats, clutch kits and slave cylinders, exhausts, top materials and seals, window regulators โ order today from Mazda, from the big specialists (Moss Miata, Flyin' Miata, Good-Win Racing and their peers) or from the general parts trade, at prices closer to a modern hatchback's than to a classic car's. Used parts are a parallel market of real depth: dismantlers who handle nothing but Miatas can supply engines, gearboxes, Torsen differentials, hardtops and panels from stock.
Harder and dearer: NA interior trim, above all uncracked dashboards and unbroken centre panels, which are no longer made and are priced accordingly in the used market; factory hardtops in the right colour; the layered repair sections for NB frame rails are available but the labour is the cost; Mazdaspeed-specific parts (the turbo, the body kit, the wheels) carry the flagship premium; and original special-edition trim โ the right seats, the right wheel, the numbered plaques โ is hunted by restorers. None of it is unobtainable; all of it rewards buying a car that already has it.
Running costs. A sorted Miata is a realistic daily classic: fuel consumption in the high twenties to mid thirties mpg depending on generation and use, insurance in line with other modest classics, and servicing any competent independent can handle. The budget line that catches new owners is the catch-up: a car bought cheap after years of light use honestly needs the timing-belt service ($600โ1,100 with the pump), a full fluid change, brake hoses and a set of tyres before it is a car you trust โ negotiate it off the purchase rather than discovering it afterwards. Tyres deserve a word: the car was designed around modest sizes, quality tyres in those sizes are inexpensive, and a Miata on fresh, correct tyres handles as its maker intended. The other ownership truth is storage: a garaged car with its drains cleared twice a year simply does not develop the rust in this guide, and fifteen minutes with a drain brush each spring and autumn is the highest-value maintenance the car has.

Which one to buy
- The all-rounder: NB 1.8 (1999โ2000). The BP-4W engine, the stiffest-feeling of the affordable cars, a glass-window top on many examples and none of the VVT car's complexity. Verify the front frame rails and it is the most Miata for the money in this guide.
- The purist's car: NA 1.6 (1990โ93). The lightest, the revviest, the original idea undiluted โ pop-ups, fingertip steering and an engine that begs for the redline. Buy a long-nose car or a documented short-nose, and accept the smaller differential as part of the bargain.
- The value buy: NA 1.8 (1994โ97). The stronger engine, the Torsen in the right packages, bigger brakes and bracing, at prices still set by sellers who think all NAs are alike. A 1997 with records is the cheapest route into a genuinely good first-generation car.
- The collector car: Mazdaspeed Miata (2004โ05). The factory turbo flagship, briefly built and priced on originality. Verify it is unmodified, check the turbo's behaviour on boost, and pay for the documented car โ a cheap Mazdaspeed is cheap for the usual reason.
- The special-edition hunter's pick: 1991 British Racing Green SE or an M Edition. You are buying colour, leather and scarcity, so the premium belongs only to a car that is verifiably what it claims to be, in its original specification.
- The modern choice: NC PRHT or ND. If the car must commute in all weathers with modern safety, the folding-hardtop NC is the comfortable pick and the ND is the better drive. Buy these on service history like any modern used car.
- The one to avoid at any trim level: the car with rotten rockers (any generation) or rotten front frame rails (NB) sold at sorted-car money. Everything else on a Miata is a parts order; structure is a welding bill and a negotiation the seller has usually not had with himself yet.
And the rule that overrides all of the above: buy the least rusty, best-documented car you can find, in the generation you can live with. Engines, gearboxes, tops, dampers and interiors are all fixable at prices you can plan for, from a parts pipeline that is not going away. A rotten shell costs more to put right than the finished car will be worth โ and on a car built in these numbers, there is always another one, in the colour you wanted, next month.
See the 32 MX-5 Miata cars currently listed.
