Honda S2000 Convertible 2D buyer's guide
Honda S2000 Convertible 2D -- the model's own buyer's guide: variants, values and what to check.
Years listed: 2000-2005 ยท Series: S2000
Overview and history
This is the model-level guide to the Honda S2000: one model, one body style, one gearbox, whose buying story is told by two engines, three phases of production, and how hard each individual car has been used. The companion series guide tells the wider story. Here the job is narrower โ to separate an AP1 from an AP2 from a CR, year by year and part by part, so the car in front of you can be identified, priced against the right comparators, and inspected for the faults that apply to its build period.
The S2000 was Honda's fiftieth-anniversary statement, put into production in 1999 and reaching the United States as a 2000 model. Up front, mounted behind the front axle line, sat a naturally aspirated 2.0-litre four producing 240 horsepower and revving to 9,000 rpm โ at launch the highest specific output of any naturally aspirated production car engine in the world. Behind it sat a six-speed manual gearbox and nothing else: no automatic was ever offered, in any market. Drive went to the rear wheels through a limited-slip differential, the suspension was double wishbones at all four corners, and the body was a two-seat open roadster with a powered soft top. There was no coupe and no cheapened entry model. Every S2000 is recognisably the same car โ which is precisely why the differences that do exist matter so much to value.
Production ran from 1999 to 2009, a little over 110,000 cars worldwide, with the United States the largest single market. US cars divide cleanly. The AP1 of 2000 to 2003 uses the 2.0-litre F20C and the 9,000 rpm redline. The AP2 of 2004 to 2009 uses the stroked 2.2-litre F22C1, revs to 8,000 rpm, gains torque everywhere, wears larger wheels and wider tyres, and carries chassis, trim and safety revisions that arrived in stages โ the 2006 drive-by-wire and stability-control changes matter almost as much as the 2004 engine change. The CR, or Club Racer, of 2008 and 2009 is a limited-run, track-focused AP2 with the soft top deleted, a removable hardtop, stiffer suspension, quicker steering and standard aerodynamic additions. AP1 and AP2 are not seller nicknames: they are the car's actual model codes, visible in the VIN, and the engine stamp settles any remaining argument.
Be plain about the pool this guide is written against. Classic Listings currently tracks 17 S2000s, all for sale, none recorded as sold, all sourced from Facebook Marketplace. By year the pool runs 2000 (3 cars), 2001 (3), 2002 (2), 2003 (3), 2004 (2) and 2005 (4): 11 AP1 cars against 6 early AP2 cars, and nothing later. There is no 2006โ2009 car and no CR in the pool, so the later AP2 and CR sections are written from model knowledge for the buyer shopping beyond today's listings, and should be read that way. Colours lean sober: black and silver account for 4 cars each of the 16 with a colour recorded, red, grey and yellow for 2 each, white and blue for 1 each. One warning: the pool's transmission field records 12 cars as manual and 4 as automatic. Treat that as listing metadata in error โ Honda never built an automatic S2000, so a car advertised as one is mis-entered or is not what it claims to be, and the car itself is the first thing to verify.
They were bought by enthusiasts, used as sports cars, and very often modified, tracked, lowered, supercharged or crashed and repaired along the way. That, rather than rust or old age, defines today's market. The mechanical core is exceptionally strong, and a standard, honestly maintained S2000 is one of the most durable performance cars of its era. The difference between a good one and an expensive mistake is almost entirely history: over-revs, oil starvation, hard launches against a differential never designed for them, water where blocked top drains sent it, and modifications that leave evidence. Mileage matters less than that history, and paperwork matters more than either.

The models
There is one model and one body: a two-seat roadster, sold in the US in a single, well-equipped specification with leather seats, air conditioning, cruise control, power windows and mirrors, a powered soft top and xenon headlights from the start. What changes across the decade is the engine, the chassis tune, the wheels and tyres, the interior details and, from 2006, the electronic layer. Learn the breakpoints โ 2002, 2004, 2006 and 2008 โ and you can date almost any US car from its details before you look at its paperwork.
| Model | Years | Engine | Output | Built | Character |
|---|---|---|---|---|---|
| S2000 (AP1) | 2000โ2003 | 2.0 four (F20C) | 240 hp | The majority of early production; US sales the largest share of just over 110,000 S2000s in total | The purist car; 9,000 rpm, sharpest chassis, least forgiving |
| S2000 (AP2) | 2004โ2005 | 2.2 four (F22C1) | 240 hp as rated at launch | Second phase of US production; no reliable public year-by-year US split is used here | More torque, calmer chassis, bigger wheels; the sweet spot for many buyers |
| S2000 (AP2, revised) | 2006โ2009 | 2.2 four (F22C1) | 237 hp under the revised SAE rating | Final phase, in falling volumes to the end of production in 2009 | Drive-by-wire, stability control, easier to live with, rarer by year |
| S2000 CR | 2008โ2009 | 2.2 four (F22C1) | 237 hp under the revised SAE rating | 668 cars for the US market | Track special; no soft top, hardtop standard, the collector variant |
(Outputs are US ratings. The fall from 240 hp to 237 hp for 2006 is a change in the SAE measurement standard, not a detune. Production figures are given only where solidly documented: the total run and the CR's US total; forum year-by-year splits vary by source, so no pricing advice is built on them.)

The AP1, 2000โ2001. The original car, and the rawest. Sixteen-inch wheels with 205/55 front and 225/50 rear tyres, a plastic rear window, and the stiffest, most alert chassis tune of the run โ including a rear end that steps out under a lifted throttle in a way later cars were softened against. The engine is the whole point: little torque below the VTEC changeover at around 6,000 rpm, then a hard pull to the 9,000 rpm fuel cut. These years also carry the longest early-car caution list: intake valve retainers, two-hole oil-jet bolts, clutch buzz on deceleration, and axle-nut and top-strap details Honda revised as production went on. None of it makes an early car a bad buy. All of it must be checked rather than assumed.
The AP1, 2002โ2003. The thoughtful revision of the early car, and the easiest AP1 to recommend. The plastic rear window gives way to glass with a demister, the suspension is retuned a step calmer, the audio and trim improve, and during 2002 the engine's oil-jet bolts change from the early two-hole design to a four-hole design that feeds the piston undersides more generously under sustained high rpm. The character is unchanged โ same engine, same redline โ but the ownership file is shorter.
The AP2, 2004โ2005. The big change. The engine grows to 2.2 litres by way of a longer stroke, the redline falls to 8,000 rpm, peak torque rises and arrives far lower, and the gearing is revised to match. Seventeen-inch wheels carry 215/45 front and 245/40 rear tyres, the bumpers and lights are restyled, the rear suspension geometry and rates are revised to calm the AP1's lift-off behaviour, and the rear subframe is strengthened. Purists call it softer; most road testers of the period called it better, and on a wet road or a long journey it plainly is. These two years are often the value point of the whole range: AP2 usability without the later cars' scarcity pricing.

The AP2, 2006โ2009. The electronic revision. For 2006 the cable throttle is replaced by drive-by-wire, Honda's Vehicle Stability Assist arrives (and can be fully switched off), the seats are redesigned, and small details mark the later cockpit. The SAE power rating changes on paper only. Volumes fall year by year, so late cars are scarcer, and 2009 carries a last-of-the-line premium condition does not always justify. Judge a late car exactly as you judge an early one; scarcity is not servicing.
The CR, 2008โ2009. The Club Racer deletes the soft top entirely and fits a removable aluminium hardtop. Air conditioning and the audio system became delete options, so a CR with neither is correct, not stripped. The suspension is stiffer again, the rear anti-roll bar larger, the steering ratio quicker, the rear tyres grow to 255/40 on wider rear wheels, a deep front spoiler and a substantial rear wing are standard, and Apex Blue Pearl was offered as a CR signature colour. Just 668 were built for the US. That scarcity makes the CR the investment variant โ and the variant most worth verifying: a standard AP2 with a hardtop, a wing and CR badges is a common creation, and the deleted soft top, the CR-specific parts and the paperwork separate a real one from a tribute. No CR sits in the current pool, so treat any CR that appears as a fresh verification exercise.
Colours and trim tells. Silverstone Metallic and Berlina Black dominate the early years โ as they do in the current pool, with 4 cars each of the 16 colour-recorded listings โ with New Formula Red, Spa Yellow Pearl (Rio Yellow Pearl later), Grand Prix White, Sebring Silver, Suzuka Blue and Laguna Blue Pearl among the other names a buyer will meet. Interiors are mostly black. A colour change is not a crime, but it is a question: original paint is a value feature, and the door jambs, engine bay edges and boot apertures tell you in seconds whether the car wears its factory colour. The paint code on the door jamb settles it โ use it, as step 1 of the inspection insists.
Engines and gearboxes
The F20C: the 2.0-litre AP1 engine
The F20C is the reason this car exists in the collector market at all. It is an all-alloy, double-overhead-cam, 16-valve four of 1,997 cc, with an 87 mm bore and an 84 mm stroke, forged pistons, a compression ratio of 11.0:1 in US form, Honda's VTEC variable valve timing and lift on both camshafts, and a redline marked at 8,800 rpm with the fuel cut at 9,000 rpm. Peak power is 240 hp at 8,300 rpm; peak torque is a modest 153 lb-ft at a very high 7,500 rpm. Those two numbers, and the rpm at which they arrive, define the driving experience completely. Below roughly 6,000 rpm the F20C is a competent, tractable 2.0-litre engine and nothing more. At the VTEC changeover the cam profiles switch, the note hardens, and from there to the cut it pulls with an urgency no turbocharged rival of the period imitates. Owners who drive it like a torque engine call it gutless. Owners who use the gearbox call it one of the great production engines. Both are describing the same car accurately.
Three pieces of engineering matter to a buyer. First, the bores use fibre-reinforced metal liners โ FRM โ cast into the alloy block. FRM is light and strong, but it cannot be bored or honed by a general machine shop, and it dictates piston and ring choice on any rebuild. An F20C needing internal work is a specialist job, not a cheap rebore โ which is why oil-starved or over-revved engines change a car's value so sharply. Second, the valve train is built for rpm, with one known weak point: the AP1 intake retainers discussed below. Valve clearances are screw-and-locknut adjusted, they drift, and a car with no clearance check in a decade has a top end nobody has looked at โ budget $300โ600 for the check at a specialist, and treat a tight exhaust clearance as the warning it is. Third, lubrication is conventional wet-sump, so oil level is a safety system. The F20C uses oil at high rpm โ healthy cars can consume a quart in a few thousand miles of hard use โ and holds no reserve for an owner who never lifts the dipstick. The commonest route to a destroyed S2000 engine is not a design flaw. It is sustained high rpm on low oil.
Oil details reward attention. The dipstick is read on both sides and the lower reading is the true one, because oil climbs the tube on one face. The early engines' piston oil-jet bolts, which spray oil at the piston undersides, were a two-hole design, changed during 2002 to a four-hole design after sustained-high-rpm piston failures in hard use. A pre-change car that has lived gently is not condemned by its bolts, but one with a track history wants the upgrade priced in: parts are cheap, labour is sump-off work, quoted in the $500โ1,000 range. Ask for the invoice either way.
Failure language on this engine is specific. A brief rattle on cold start that fades, and clicking at warm idle from the front of the engine, point first at the timing chain tensioner โ the TCT โ whose worm-gear mechanism wears and loses tension. It is the most common F20C and F22C1 noise complaint, not usually an emergency, and a replacement fitted is a $350โ700 job; sandblasting the worm gear is a temporary owner fix, not a repair to pay a premium for. Bent valves and cracked intake retainers point somewhere else: at a mechanical over-rev, the money shift, where a driver aiming for fourth takes second at high speed and the road wheels drive the engine far past its fuel cut, which no limiter can prevent. AP1 intake retainers crack under exactly that abuse, and a cracked retainer can drop a valve. The recognised preventive upgrade is AP2 retainers and keepers on the intake side, a $600โ1,200 job, and documented AP2 retainers on an AP1 car are a selling point worth paying for. Blue smoke under hard acceleration and heavy oil consumption complete the tired-engine picture; insist on the compression and leak-down figures from the inspection rather than a seller's summary. It is the spread between cylinders, more than the absolute number, that prices the engine.
The F22C1: the 2.2-litre AP2 engine
For the US AP2, Honda stroked the engine rather than replacing it. Bore stays at 87 mm, stroke grows to 90.7 mm, capacity rises to 2,157 cc, and the character shifts down the rev range: 240 hp at 7,800 rpm as originally rated (237 hp under the revised SAE standard from 2006), 162 lb-ft at 6,500 rpm, a redline of 8,000 rpm and a fuel cut at 8,200 rpm. The VTEC changeover arrives at a similar point, but there is more engine below it, and the revised gearing multiplies the effect. On the road the F22C1 car is quicker in ordinary driving and easier in traffic โ and, to AP1 loyalists, missing the final, manic thousand rpm that made the original famous. That argument is settled by taste, not by condition. Buy the character you want; then buy condition within it.
Internally the F22C1 keeps the FRM liners, the forged pistons (11.1:1 compression) and the general architecture, and inherits most of the family checks: the same tensioner wear, the same dependence on oil level, the same screw-adjust valve clearances, the same need for a compression spread you have seen yourself. It does not carry the AP1's retainer concern โ the AP2 retainer is the stronger part the AP1 upgrade uses โ and every F22C1 has the later oil-jet bolts. From 2006 the management changes around it: drive-by-wire throttle and the stability-control system trimming it. A 2006-onwards car with a throttle or stability warning light is showing you a fault to price, not a quirk to ignore. The secondary air system deserves a mention on all years: pumps and valves age, the car will not pass a smog test without them, and replacement can run $600โ1,500, so a check-engine light waved away as just the air pump is a bill being handed to you.
A note on swaps, because this market invites them. F20C and F22C1 engines interchange physically with little drama, and forced-induction builds are common enough that a returned-to-standard car is a recognisable type. None of that is automatically disqualifying, but all of it must be disclosed and priced. The engine stamp and the paperwork tell you which engine the car was born with; an AP1 wearing an F22C1, or any car with an undocumented engine change, is worth materially less than a matching car, and a car that once ran a supercharger or turbocharger has lived a harder life in its differential, clutch and cooling system than its current specification suggests. Look for the evidence the inspection lists, and let the seller explain it before you price the car.
Gearboxes: the six-speed manual, and only the six-speed manual
Every S2000 uses Honda's own six-speed manual, a short-throw box routinely described by period testers as one of the finest manual gearboxes ever fitted to a production car. There is no automatic and no factory exception, which is why the four automatic entries in the current pool are flagged in the overview as metadata errors to be resolved against the physical car. If you ever stand in front of an S2000 with two pedals, you are not looking at a rare variant; you are looking at a conversion or a misdescription, and the paperwork goes back to first principles before price is discussed at all.
AP1 and AP2 boxes differ in their ratios. The AP2 uses revised ratios โ effectively shorter lower gears through a changed secondary reduction, with a taller top โ to suit the F22C1's lower redline, and gained carbon-faced synchronisers for the hardest-worked gears. The AP2 clutch hydraulics also gained a delay valve in the slave cylinder, softening driveline shock at the cost of slightly vague engagement on fast changes; removing it is a common modification that is neither fault nor virtue. Judge any box on the classic evidence. Second gear is the test: a baulk into second when cold that improves with warmth is the common early warning of synchromesh wear, while a box that grinds hot or jumps out of gear is pricing a rebuild, realistically $1,800โ3,500, against a good used box at $800โ1,800 plus fitting. Clutch life is use-dependent, and a full replacement fitted runs roughly $1,200โ2,000. Two behaviours should not be priced as faults: the AP1's deceleration buzz from the clutch disc springs, a documented characteristic Honda addressed with a revised disc, and slight notchiness into second on a stone-cold morning. Note them, verify them against the paperwork, and move on.
The differential belongs in this section because it is geared, filled and broken like part of the transmission. It is a Torsen-type limited-slip unit sized for a 240 hp naturally aspirated engine driven with sympathy โ not for clutch drops, drag launches or double the factory torque. Whine on a light throttle, clunks on take-up, and split, leaking fluid-filled mounts are the standard findings; a fluid change is trivially cheap, mounts are a few hundred dollars in parts, and a failed ring and pinion or cracked housing is a $1,500โ3,000 conversation. Any history of forced induction or repeated launches moves the differential to the top of your inspection list, ahead of the cosmetics, every time.

Problem areas
Everything in this section follows from how these cars were used. The S2000 is not a fragile car and it is not a rust-prone car by the standards of older classics; it is a high-revving sports car now between seventeen and twenty-six years old, and its expensive problems are concentrated where enthusiasm meets physics โ the valve train, the oil supply, the differential, the soft top and its drains, and accident and modification history that the panels may not volunteer. Work through the systems in this order, because the early ones can end a purchase on their own and the later ones mostly adjust its price.
Engine history: over-revs, oil and the valve train
The mechanical over-rev is the defining AP1 risk and a real AP2 risk too. A missed downshift at speed drives the engine past its fuel cut mechanically; valves float, pistons meet valves, retainers crack. The damage is not always immediate or total โ a car can run apparently well with cracked intake retainers or slightly bent valves and fail later โ which is why history and testing outrank impressions. Ask directly whether the car has ever been over-revved, tracked or money-shifted, ask what was done afterwards, and then test as if the answer had been evasive: the compression and leak-down check in step 3 of the inspection is the test that prices this, and an AP1 with no record of AP2 intake retainers is a car carrying an open question worth $600โ1,200 to close properly. A seller who has done the retainers, kept the invoice and can show even compression figures has removed the car's single largest engine uncertainty. Pay for that certainty; it is cheaper than buying the uncertainty.
Oil starvation and consumption run a close second. The wet-sump F-series engines consume oil in hard use, the dipstick invites misreading, and the consequence of sustained VTEC running on a low sump is bearing damage that presents as a knock under load, metal in the oil, or an engine that simply expires. On any car, check the level yourself, on both sides of the dipstick, taking the lower reading; look at the oil's colour and smell; ask when it was last changed and with what; and treat a low reading on arrival as evidence about the owner's habits, not as a top-up opportunity before the test drive. Sustained smoke, a rattling bottom end or glitter in drained oil ends the negotiation for that engine at any price short of parts-car money. The timing chain tensioner noise described in the engine section belongs in this list too โ common, diagnosable, a few hundred dollars to put right โ but distinguish it carefully from chain-guide or bottom-end noises, which are not. A cheap stethoscope or a specialist's ear at a pre-purchase inspection separates a $500 tensioner from a four-figure engine job, and guessing wrong in either direction is expensive.
Age faults now apply to every year. Radiators with plastic end tanks crack; a quality replacement fitted runs $500โ900, and coolant staining at the seams is the next bill showing itself. Hoses harden, thermostats stick, water pumps weep, and the secondary air system triggers emissions faults as described above. Coil packs fail individually โ a single-cylinder misfire that moves with the coil when swapped, a $100โ250 part โ while spark plugs must be the correct type and correctly torqued, because a plug that backs out damages threads with it. None of these faults rejects a car. Together, on a car with no records, they are the shape of the first year's recommissioning bill, and should be totalled before you bid.
The soft top, its drains, and where the water goes
The powered soft top is the S2000's largest single wear item and its most underestimated cost. The mechanism itself is reliable; the fabric, the window, the straps and the drains are consumables on a twenty-year clock.
Fabric and frame. The frame bows rub the fabric at predictable points and eventually wear holes through it from the inside, where the frame joints fold; the elastic straps lose tension with age, the top folds wrongly, and the wear accelerates. Small patches caught early can be reinforced; a holed or shrinking top is a replacement, and a quality top supplied and professionally fitted runs roughly $1,200โ2,500. Price the whole job, not the fabric alone โ fitting is skilled work, and a cheaply fitted top leaks and drums. Operate the top twice on any viewing, and check the front latches: worn latches rattle and leak at speed, and adjustment is a modest job sellers leave undone.
Windows: plastic, then glass. Cars from 2000 and 2001 carry a plastic rear window that clouds, creases and eventually cracks. A cloudy window can sometimes be polished back; a split or yellowed one is a window or top replacement, and it dates an early car every time the roof is up. From 2002 the window is glass with a demister, which removes the problem almost entirely โ one concrete reason the 2002โ2003 cars make such sensible buys. Test the demister as you would any other load.
Drains, trunk and cabin water. The top's drain system channels water to outlets that clog with leaves and dirt. Blocked drains overflow into the body, and the water collects in the spare-wheel well and in the cabin behind the seats, where it starts corrosion in seams photographs never reach. Tail-light and trunk seals perish too, and the well is the lowest point. Lift the spare and the tools and look, on every car, without exception โ staining, silt lines and a damp smell are findings, and perforation, while uncommon, converts a tidy car into a welding conversation. Wet carpet behind the seats on a dry day is a drain fault that has already happened, and it belongs in the price.

Chassis, steering, brakes and the differential
The S2000's double-wishbone suspension, electric power steering and brakes are durable, precise and โ at this age โ entirely dependent on rubber, alignment and fluid discipline for their condition.
Alignment and seized hardware. This car is unusually sensitive to alignment; correct factory settings transform a nervous car, and incorrect toe, especially at the rear, is a common, curable cause of the instability sellers blame on the model. The catch is the hardware: the adjusters run in bushes whose bolts seize solid in salted-road cars, and freeing them can turn a routine alignment into a $500โ1,500 suspension job. Ask when the car was last aligned, ask for the printout, and on any northern or coastal car have the adjusters tested on a lift. Worn bushes present as vagueness, clonks and uneven tyre wear, and a full refresh is a $1,000โ2,500 undertaking; a car with recent, invoiced bush and alignment history is worth a clear premium.
The AP1's handling, honestly. Early cars, on worn rear tyres, earned their reputation for abrupt lift-off oversteer. Honda progressively calmed the car โ the 2002 retune, then the AP2's geometry and wider rear tyres. None of this makes an AP1 dangerous in competent hands on good tyres; all of it makes tyre condition and matching a safety check, not a cosmetic one. Budget for a matched set of quality tyres ($800โ1,400 fitted in AP2 sizes, less in AP1 sizes) on any car wearing mixed or old rubber, and treat mismatched rears on an AP1 as a reason to drive gently to the tyre shop and nowhere else first.
Steering and bearings. The electric power steering has no pump or fluid; its faults are torque-sensor and rack wear presenting as notchiness or varying assistance, and a rack problem is an $800โ1,800 job fitted โ uncommon, but test with lock-to-lock sweeps. A clicking from the rear on take-up is classically the axle-nut torque issue Honda addressed with a revised tightening and staking procedure, a cheap fix if caught as a noise, and a bearing replacement ($400โ800 a side fitted) if driven on. Brakes are conventional โ discs, pads, hoses now old enough to replace on sight, calipers that seize on little-used cars โ with a full hydraulic refresh at $600โ1,200 fitted.
The differential and mounts return here as condition items: whine, clunk, split mounts and any whiff of launch or forced-induction history. Add the engine and gearbox mounts โ torn mounts present as driveline shunt. A car that clunks, whines and shunts is not necessarily a bad car; it is a car whose driveline bill should be totalled and deducted, rather than discovered.
Body, paint, accident history and rust
The S2000's shell is galvanised-era Honda steel, well drained in most places and far less rust-prone than the classics of twenty years earlier โ but it is not immune, and accident history matters more than corrosion on most cars you will see.
Where rust does appear. Check the rear arches and the lip where arch meets sill, the bottoms of the front wings, the sill ends, the spare-wheel well and trunk floor, and any previously repaired panel where protection has been broken. Cars from salted-road states โ the pool includes northern listings from Washington, Indiana and Colorado as well as southern cars โ deserve underside time on a lift: surface corrosion on subframes is normal and treatable, perforation in the shell is not, and the distinction is the whole check. Fresh underseal over everything, applied the week before sale, deserves scepticism: honest factory protection looks honestly aged.
Accident and modification evidence. A light, rear-drive car with a lively rear end has met barriers and ditches at a rate the model cannot hide. Read the panel gaps; look for paint texture and colour differences panel to panel; check the front chassis legs, radiator support and inner wings for straightening or replaced panels; and run a magnet or paint gauge over the wings and quarters. Modified cars leave their own map: rolled arches for wide wheels (the S2000 needs unusually high offsets, around +55 front and +65 rear, and low-offset wheels are the usual reason arches were rolled), cracked paint on front wing tabs, cut liners and undertrays, and witness marks from removed forced-induction pipework. Every finding is negotiable information; an undisclosed one discovered later is a dispute. A standard car on standard wheels at standard height is the easiest car to value in this market, and its premium is rational, not snobbery.

Interior, electrics and the details that price a car
The cockpit is small, hard-wearing and expensive to put right in its specific parts. The leather seats wear on the driver's entry bolster first, and the foam beneath collapses with mileage and sun; a bolster repair is a few hundred dollars, a full retrim $1,500โ3,000, and S2000 seats are also a theft item (they fit smaller Hondas) โ check the rails, mounting bolts and condition against the claimed mileage. The steering wheel, gear knob and pedal rubbers wear in step with mileage: a supposedly low-mileage car with a polished wheel rim and shiny pedals is telling you its odometer is not the whole story. The digital cluster is normally reliable; check every segment lights and that the tachometer sweeps to the correct redline for the engine fitted โ a mismatched cluster is a swap tell. Work through windows, mirrors, top motors, cruise control and air conditioning that blows genuinely cold; a compressor or condenser fault is a $600โ1,200 repair. From 2006, every warning light must light at key-on and go out after start, and a missing bulb is a finding, not a fix. Finally: two keys, a VIN matching across plate, jamb and title, and dealer or named-specialist history carrying far more weight than parts receipts alone. On this car, history is the difference between the engines' known risks being closed questions and open ones, and the market prices it accordingly.
How to inspect one
Allow at least an hour, plus a test drive, and bring a torch, a tread gauge, a paint-depth gauge if you have one, and a friend to work the top and lights while you watch. If the car passes you, pay for a specialist inspection with compression and leak-down tests and lift time โ that money buys the answers to the three questions that decide value: engine health, driveline health and shell honesty.

- Start with the paperwork and the codes. Match the VIN on the title to the plate and the door-jamb sticker, and read the chassis code in the VIN: AP1 and AP2 cars identify themselves there, and the code must agree with the claimed year. Check the paint code against the panels. Then read the engine stamp โ F20C for an AP1, F22C1 for an AP2 โ because a badge or a seller's memory settles nothing. Work the history for valve-clearance checks, tensioner replacement, AP2 retainers on an AP1 car, clutch and differential work, and alignment printouts. A thick, named-specialist file is worth real money here.
- Cold start. Insist the engine is stone cold, and be there when it is first turned over. Listen for a brief timing-chain rattle that fades (the tensioner story from the problem areas) against any rattle that stays, any low knock, and any top-end clatter that does not settle. Watch the exhaust: a puff of blue that clears is one conversation; continuous blue smoke is an engine-out one. Every warning light must light and then go out.
- The compression and leak-down test. This step prices the engine, and on this model it is not optional. A specialist gives you a compression figure per cylinder and a leak-down percentage with the source of any loss identified. Judge the spread first: even figures describe a healthy engine, while one low cylinder on an AP1 is the over-rev and retainer story asking to be paid for. Do not accept a verbal assurance in place of the sheet.
- Oil, honestly read. Pull the dipstick yourself, read both sides and take the lower reading as true. Note the level before the car is driven โ a level at or below the bottom mark on arrival tells you how the car has been kept, and the oil-starvation section explains what that habit costs. Look at the oil's condition, smell the filler cap for fuel or burning, check for mayonnaise emulsion that would suggest coolant mixing, and look under the filler and around the cam cover for leaks and for the varnish of long intervals. Ask what oil and what interval, and check the answer against the history file from step 1.
- The top, worked twice, and the water check. Raise and lower the powered top twice, watching the fold, the straps and the frame joints the problem section names, and feeling the fabric at the bow contact points for thinning and holes. Inspect the rear window โ plastic on 2000 and 2001 cars, glass with a demister to test from 2002 โ and work the front latches for rattle and seal. Then go to the trunk: lift the spare wheel, the tools and the tray, and look and feel for water, silt lines and staining in the well, and check behind the cabin seats for damp carpet. Wet where it should be dry means drains or seals, priced as the problem section describes.
- Under the car. On a lift if at all possible: rear arches and sill ends, subframes and suspension arms for the surface-versus-perforation distinction, the differential for leaks, whine evidence and split fluid-filled mounts, the exhaust for non-standard sections and heat damage, the undertrays and arch liners for scraping and absence, and the alignment adjusters for seizure โ ask the inspector to confirm the bolts will actually turn before anyone promises you an alignment. Look for fresh underseal applied over everything as a question, not an answer.
- Body, gaps and modification evidence. Walk the car in flat light and read every gap. Use the magnet or paint gauge on wings, doors and quarters, and check jambs against the paint code from step 1. Then hunt the modification map: rolled arches, cracked front-wing tabs, low-offset wheels, cut liners, plumbing witness marks, and a ride height living on its undertray. Standard and straight is the premium specification; anything else needs a discount and an explanation, in that order.
- Gearbox, clutch and differential on the move. From cold, engage second repeatedly: the cold baulk that eases with warmth is the known early warning; a hot grind or jump-out is a rebuild priced into the offer. Work every gear, feel the clutch bite, and listen for the AP1's documented deceleration buzz (a characteristic, not a rebuild). In a quiet car park, listen for differential clunk and the axle-nut click on take-up, then hold a steady light throttle and listen for differential whine. Shunt, clunks and whine together are the driveline bill, totalled.
- The test drive, at full operating temperature. Fifteen minutes minimum. The engine must pull cleanly through the VTEC changeover at around 6,000 rpm and on to its correct redline โ 9,000 rpm in an AP1, 8,000 in an AP2 โ without hesitation or smoke under load. A car the seller will not let you rev is a car whose engine you cannot buy. Check the steering lock to lock for notchiness, brake firmly for straight, judder-free stops, and listen over poor surfaces for bush and mount noises.
- Heat, cooling and electrics at idle. Let the car idle hot after the drive. The temperature must sit stable, the fans must cycle, and there must be no coolant smell, steam or staining at the radiator end tanks. Work every electrical load: windows including auto-down, mirrors, top motors again, air conditioning genuinely cold, heater, lights including the xenon headlights, washers, audio and, on glass-window cars, the rear demister. Note every failure with its repair cost from the problem areas rather than as a vague deduction.
- Stance, tyres and the safety basics. Stand back and look: the car should sit level and even, at a plausible standard height unless a suspension change is disclosed and invoiced. Read all four tyre sizes against the model year โ 205/55 and 225/50 on 16-inch wheels for AP1 cars, 215/45 and 245/40 on 17-inch wheels for AP2 cars, 255-section rears on a CR โ and check brand, model, age and tread match across each axle. Mixed or aged tyres on an AP1 car are a handling finding, not a cosmetic one, and a matched new set belongs in your first-month budget whenever what you find falls short.
- Interior last, as corroboration. Sit in both seats and judge bolster wear and foam collapse against the claimed mileage, then read the wheel, gear knob and pedals as a second opinion on that mileage. Confirm the cluster redline matches the engine from step 1, check the seat mountings, and smell for the damp of the drain story. Weigh a sound, original cabin heavily: it is the clearest signal of a careful life, and the hardest thing to recreate.
Values
No prices are printed in this section on purpose: the market figures for cars currently listed and recently recorded sit in the computed market block that follows this guide and is refreshed as listings change, and any number frozen into prose would be stale before it was useful. What follows instead is how to read that block โ and the wider market behind it โ like a buyer who intends to keep the car.
Start with the condition and history spread, because on the S2000 it is wider than the model spread. The same year and colour can be two different purchases: a standard, documented car with its engine questions closed, and a modified or patchily recorded car with its questions open. The first commands the top of any range; the second should be priced from the cost of closing its questions โ compression test, retainers, differential, top, tyres, alignment โ not from the first car's figure with a token discount. Asking prices run optimistic at the top, and the gap between asking and achieved money is closed by paperwork: cars with complete specialist history and original specification transact closest to their asking figures, while cars with stories rely on the next buyer not asking the inspection questions. Use that asymmetry. It is the negotiation.
Variant premiums are real and explicable. The CR sits at the top on documented scarcity โ 668 US cars โ and a verified CR is a collector purchase as much as a driving one; verify it as the models section describes, because tribute cars trade on the same badges. Late AP2 cars carry a final-year premium that should be tested against condition, not paid automatically. The AP1-versus-AP2 argument cuts both ways: the 9,000 rpm engine gives the best early cars a purist following, while AP2 usability gives it the broader buyer pool. In practice the strongest mainstream money follows condition and originality across both codes โ a superb 2002 or 2003 AP1 and a superb 2004 or 2005 AP2 are close relations in value. Colour moves money at the margins: the sober silvers and blacks that dominate listings (half of the 16 colour-recorded cars in the current pool) are the liquid specification, while yellow, blue and white cars find fewer but keener buyers, and a colour change is a deduction on any car.
Read the current pool as a sample, honestly labelled: all 17 cars are for sale, none recorded sold, all from one source, and the years run only 2000 to 2005 โ so the block below describes the early and middle market, not the late AP2 or CR market. Project logic is simple because the expensive faults are knowable: a cheap car with a tired engine, a holed top, a whining differential and seized alignment is a good car's price paid in instalments with labour added. The premium for a standard, serviced, documented, dry car, paid once, is almost always smaller than the discount a compromised car appears to offer.
Parts and ownership
The S2000 is one of the best-supported modern classics a buyer can choose: Honda built it in meaningful numbers for a decade, the specification changed little across that decade, and a large specialist and owner community surrounds it. Most ownership costs are predictable; the surprises sit in the short list below.
Easy: routine service items โ filters, plugs, brake discs and pads, dampers and springs, clutch kits, tensioners, coil packs, radiators and hoses, wheel bearings, bushes, top latches and straps, and most seals. Honda counters still supply a surprising amount for this car, and the aftermarket covers the wear items thoroughly. Budget the first year honestly: catching up deferred fluids, valve clearances, plugs, an alignment and tyres runs into four figures before you improve anything, and that catch-up, documented, is itself a value feature when you sell.
Harder and dearer: anything tied to the engine's specialist construction. FRM-liner block work and a quality engine rebuild are specialist undertakings priced in thousands; good used engines carry the same verification burden as a whole car. CR-specific parts โ hardtop, aero pieces, suspension and steering components โ are scarce and hunted by tribute-builders as well as CR owners. Factory hardtops for standard cars change hands at a clear premium, so a car offered with one has a separable asset in the deal: value it, and check its seals and rear window as carefully as the soft top. Soft tops are readily available; the money is in fitting them well. Clean body panels, undamaged front wings and original wheels in the correct offsets are finite resources on a car increasingly parted out after accidents, and priced accordingly.
Running costs. A sorted S2000 is a realistic regular-use car: fuel consumption in the mid-to-high twenties per gallon in mixed use, worse in proportion to how much of the rev range you use (which is the point of the car), insurance in line with other modern classics, and annual servicing any good specialist can handle, with oil discipline โ level checks between services, not just at them โ as the owner's one non-negotiable habit. Track use is within the car's design brief and outside a gentle budget: tyres, brakes, fluids and the differential all consume at track rates. Stored cars wake up well, but wake them properly โ fresh fluids, brake and tyre checks, a top operated gently โ rather than with a jump start and a motorway run.

Which one to buy
- The all-rounder: 2004โ2005 AP2. The F22C1's torque, the calmer chassis, bigger wheels and the glass-window top, where condition is still plentiful and scarcity pricing has not arrived. For one S2000 to drive everywhere, this is it.
- The purist car: 2002โ2003 AP1. The 9,000 rpm F20C with the early car's faults already addressed by the factory โ glass window, later oil-jet bolts, two years of detail fixes. Buy it with AP2 retainers done or budgeted, and compression figures seen.
- The value buy: a documented 2000โ2001 AP1. The cheapest route into the definitive engine, provided the early-car list is worked through honestly: retainers, oil-jet bolts, plastic window and top condition. Undocumented early cars are not the value buy; they are the gamble it gets confused with.
- The later car: 2006โ2009 AP2. Drive-by-wire, stability control and genuine late-run scarcity. Pay the late premium only for condition and history that justify it, and check the warning lights with the same care as the compression figures.
- The collector car: the CR. All 668 are collectible; not every car wearing the badges is one of them. Verify the deleted soft top, the hardtop, the CR hardware and the paperwork before paying CR money โ and expect to shop beyond the current listings.
- The track base: the honest modified car. Disclosed, quality modifications with cooling and brake work invoiced make a better track purchase than a standard car you will immediately spend money modifying. Buy work someone else has paid for, at the discount modified cars carry.
And the rule that overrides all of the above: buy the car whose engine questions are already closed โ compression seen, oil history known, retainers settled on an AP1 โ in the specification your driving actually wants. Tops, differentials, bushes and paint can all be put right at prices this guide has put numbers on. A bent-valve engine, a starved bottom end or hidden accident work costs more than the finished car will forgive โ and on a car built around one extraordinary engine, the engine is the one thing that can never be made original again.
