Fiat 124 Spider buyer's guide
Fiat 124 Spider -- the model's own buyer's guide: variants, values and what to check.
Years listed: 1969-1982 ยท Series: 124 Spider
Overview and history
The Fiat 124 Spider is the car that proved a small Italian roadster could be both exotic and usable. Launched at the Turin motor show in November 1966, it took the mechanical package of Fiat's new 124 saloon โ itself a thoroughly modern design โ shortened the floorpan, and clothed it in a body drawn by Tom Tjaarda at Pininfarina, who also built it. Where its British rivals offered pushrod engines, cart-sprung or crudely located rear axles and side curtains, the Spider arrived with a twin-overhead-cam engine, a five-speed gearbox, four-wheel disc brakes and a proper folding top you could raise from the driver's seat with one hand. It was, specification for specification, a decade ahead of the MGB it outsold in America.
The formula barely changed for nineteen years because it did not need to. Production ran from 1966 to the summer of 1985, and well over 170,000 Spiders were built, the large majority of them exported โ above all to the United States, which took the car to its heart from 1968 onwards. The engine grew in steps from 1438 cc to a full two litres, emissions equipment came and (in spirit, if not in law) went, bumpers grew for American regulations and shrank again in taste, but the car underneath stayed the same honest package: Lampredi twin-cam up front, five speeds, a well-located live axle behind, and that Pininfarina shape that has never stopped looking right.
The ending is unusual and matters to buyers. Fiat withdrew from the US market after 1982, but the Spider did not die with the badge. Pininfarina โ which had always built the car โ took over production and distribution outright, selling the final cars from 1983 to 1985 as the Pininfarina SpiderEuropa in Europe and the Pininfarina Azzurra in the United States. These last cars are the most developed of the line: fuel-injected, better trimmed, and in the very last 1985ยฝ form fitted with rack-and-pinion steering in place of the old steering box. A series-level guide to the 124 Spider elsewhere on this site covers the broad history; this guide is the model-level companion, and it concentrates on what you need when you are standing in front of a specific car with money in your pocket.
Our own listings describe the market you will actually shop in. We currently track 23 classic 124 Spiders for sale, all of them sourced from Facebook Marketplace private sellers, spanning 1969 to 1982 โ which means the Fiat-badged American-market cars, not the rare early European cars and not the Pininfarina-built finale. The weight of the market sits in the late cars: 1977 to 1982 accounts for the clear majority, with 1978 and 1979 the single most common years. Nineteen of the 23 are manuals and four are automatics, and red is the colour the model lives in โ nine of the 23 cars โ followed by blue, silver, grey and green. Florida supplies more listings than any other state, with Alabama, Washington, Texas, New Jersey and California behind it. In other words: the typical car on offer is a late-seventies or early-eighties Spider 2000 in red, sold privately, in condition that ranges from cherished driver to long-parked project. Everything below is written for that reality.

The models
One body, one basic specification, nineteen years โ the Spider's story is told by its engines and its badges. The chassis designations are worth learning because sellers use them loosely: AS for the original 1400, BS for the 1600, CS for the 1800 and its derivatives, DS for the final Pininfarina cars. All cars are two-seat roadsters with the same folding top, the same dashboard architecture and the same suspension layout; what changes is displacement, fuel delivery, bumpers and trim.
| Model | Years | Engine | Output | Character |
|---|---|---|---|---|
| Spider 1400 (AS) | 1966โ1969 | 1438 cc twin-cam, carburettor | about 90 hp | The original; light, sweet, chrome-bumpered |
| Spider 1600 (BS) | 1970โ1973 | 1608 cc twin-cam, carburettor | about 104 hp | The enthusiast's early car; the twin-cam at its keenest |
| Spider 1800 (CS) | 1974โ1978 | 1756 cc twin-cam, carburettor | 118 hp in Europe; US cars notably less | Torquier and lazier; US cars carry the full emissions load |
| Spider 2000 | 1979โ1982 | 1995 cc twin-cam, carburettor then injection | about 102 hp | The developed car; injected examples are the usable ones |
| Spider 2000 Turbo | 1981โ1982 | 1995 cc twin-cam, turbocharged | about 120 hp | US-market special converted by Legend Industries; rare |
| Spider Volumex | 1982โ1985 | 1995 cc twin-cam, supercharged | 135 hp | European-market flagship; the quickest production Spider |
| Pininfarina SpiderEuropa / Azzurra | 1983โ1985 | 1995 cc twin-cam, injection | about 105 hp | The finale; best trimmed, last cars get rack steering |
(Outputs are period figures for European-market cars unless noted; American-market cars of the emissions era were rated lower, sometimes much lower, and the gap is a real part of the buying decision covered below.)
The early cars (1966โ73). The 1400 established the template and the 1600 improved it in every way that matters: more torque, a higher compression ratio and the same free-revving character. These are the lightest Spiders, the prettiest, and the ones with chrome bumpers and small rear lamps. They are also the cars with the least weather protection for the structure, the weakest parts support in trim, and โ in America โ the thinnest survival rate, because they were cheap used cars for decades. Our listings hold just a handful: single cars from 1969, 1971 and a pair from 1970. A 1592 cc version of the 1600 engine was fitted to US-market cars for 1973 as emissions rules bit; it is no quicker and no more desirable, and is bought on condition like everything else.
The 1800 (1974โ78). The 1756 cc engine brought real torque and made the Spider a more relaxed car, and in European tune it is a fine engine. The American story is sadder: through the mid-seventies the US cars accumulated an air pump, exhaust-gas recirculation, retarded ignition and low compression, and the 1975-on cars wear the large impact bumpers Washington required. Output fell a long way from the European figure. None of this is the car's fault, and a well-kept US 1800 is a pleasant, torquey driver โ but it is not the rev-happy thing the badge promises, and many owners have spent money recovering the performance Fiat tuned out. Two of the cars in our listings are 1977s and four are 1978s, so this is a version you will meet often.
The Spider 2000 (1979โ82). The two-litre car is the one the market is built around โ twelve of our 23 listings are 1979โ82 cars. The 1995 cc engine restored some of what emissions tuning had taken, the body got a mild and successful facelift with a revised grille and flush door handles, and the cabin improved. The important divide is fuel delivery: carburettor cars first, then Bosch L-Jetronic fuel injection, which reached the US Spider for 1980 in some markets and was standard by 1981. The injected car starts, idles and pulls the way the twin-cam was meant to, and is worth seeking out deliberately. The automatic option โ a three-speed General Motors unit โ arrived with the 2000 and accounts for all four automatics in our listings; it suits the car's cruising side and dulls everything else.
The specials. The Spider 2000 Turbo was an American-market conversion carried out for Fiat by Legend Industries: a turbocharger on the injected two-litre, about 120 hp, and a genuine period curiosity โ verify one carefully, because badges are cheap and the conversion hardware is what you are paying for. The Volumex, sold in Europe in the car's final years, used a Roots-type supercharger driven from the crankshaft and is the connoisseur's Spider: 135 hp, real rarity, and supercharger-specific parts that require patience. The Pininfarina cars that closed the line in 1985 are covered in the buying section below; none appears in our current listings, which is typical โ they were built in small numbers and owners keep them.

Engines and gearboxes
The Lampredi twin-cam: 1438 and 1608
Every classic Spider carries a version of Aurelio Lampredi's twin-cam four โ an engine so good that Fiat built derivatives of it for three decades. The architecture never changed: a cast-iron block, an alloy crossflow head, two overhead camshafts in separate cam boxes, bucket tappets with shim adjustment, and โ the headline in 1966 โ a toothed rubber belt driving the cams, the first such arrangement on a mass-production engine. The 1438 cc original makes about 90 hp and loves revs; the 1608 cc of 1970 added capacity and compression and is the keenest of the carburettor engines, pulling hard to its redline with a soundtrack no pushrod roadster can match.
Two disciplines govern life with this engine, and both are cheap to honour and expensive to ignore. The first is the timing belt. The belt also drives the auxiliary shaft that runs the oil pump and, on early cars, the distributor and fuel pump. Treat the engine as an interference design: if the belt breaks or jumps, pistons and valves can meet, and a tired belt is a four-figure accident waiting for a date. Belts are inexpensive and the job is a straightforward $300โ600 at a specialist including the tensioner bearing, which should be changed with it. Replace the belt on any car without a dated invoice for the work โ budget it into the purchase, do it in the first month, and thereafter work to roughly 30,000 miles or five years, whichever comes first. The second discipline is valve clearances. The shim-and-bucket adjustment does not drift quickly, but it does drift, and a car that has never had its clearances checked will be down on power and noisy in a way owners mistake for character. A clearance check and re-shim is a $250โ500 job and transforms a tired-feeling engine more often than any other single service item.
Oil leaks are the engine's everyday signature: the cam box gaskets weep, the front crank seal misting oil over the belt covers is common, and a car that leaves no spot at all has usually just been cleaned. Distinguish weeps from wounds โ a cam box gasket set is cheap and DIY-able, while oil in the coolant or coolant in the oil points to the head gasket, covered in the problem areas.
The 1756 and the carburettor 1995
The 1756 cc engine of 1974 kept the architecture and added stroke, torque and โ in America โ trouble. The engine itself is as tough as its brothers, but US-market cars were progressively strangled: lower compression, an air-injection pump, EGR, a catalytic converter from the late seventies, and carburation tuned for the test cycle rather than the road. The standard carburettor on US 1800s and carburettor 2000s is a twin-choke Weber downdraught of the ADFA family โ a competent instrument when new that suffers now from worn throttle spindles, perished diaphragms in its choke and accelerator-pump circuits, and decades of well-meaning adjustment. The classic symptoms are a flat spot pulling away, a hot-start reluctance and an idle that will not settle. Before paying for a rebuild โ $400โ800 done properly โ rule out the vacuum leaks at the carburettor base and the maze of emissions hoses, because on these cars air leaks outnumber carburettor faults two to one.
The carburettor 1995 cc engine of 1979โ80 restored displacement but kept the emissions-era character in US tune. Many have since been fitted with the upgrades the specialists sell โ a larger Weber (the 32/36 progressive conversion is the common one), a free-flowing exhaust manifold in place of the restrictive emissions casting, and ignition timing set for driving rather than compliance โ and a car so modified, with the work documented, is usually a better buy than a smog-original car at the same money. What you must not do is pay a premium for claimed performance work you cannot see, or buy a car in a state with emissions inspection whose equipment has been removed; the legality follows the car, not the previous owner.
The injected 1995, the Turbo and the Volumex
From 1980โ81 the US Spider 2000 gained Bosch L-Jetronic fuel injection, and it is the single best thing that ever happened to the model's usability. The system is conventional L-Jetronic: an airflow meter with a flap that meters air and tells the ECU how much fuel to deliver, a cold-start injector, an auxiliary air valve for fast idle, and a throttle switch. There is no feedback wizardry to go obsolete. When it is right โ and it usually is โ the car starts instantly hot or cold, idles cleanly and pulls without the flat spots of the carburettor cars. When it is wrong, the causes are almost always air and age rather than electronics: split intake hoses and a perished airflow-meter boot admit unmetered air and lean the mixture out; the auxiliary air valve sticks and gives a high or hunting idle; the cold-start injector's thermo-time switch fails and gives hot-start trouble. The ECU itself is rarely the culprit, so test the cheap things first โ a smoke test for intake leaks costs little and settles arguments. Injected cars also run a high-pressure electric fuel pump and a filter that owners forget; a whining pump is a pump full of tank debris, and the tank is covered in the problem areas.
The Turbo used the injected engine with a turbocharger conversion engineered by Legend Industries in the United States: about 120 hp, period lag, and hardware that is now the whole ownership proposition โ turbocharger condition, the conversion's pipework and its documentation. The Volumex took the opposite route for Europe: a Roots-type supercharger in the valley of the engine, driven by belt, giving 135 hp with instant response. Its engine has its own pistons and details, and supercharger drive parts are specialist items; buy a Volumex on expert advice, not on enthusiasm.
Cooling, common to all of them. Every version of the twin-cam depends on a cooling system that was adequate when new and has no margin for neglect now. Early cars use an engine-driven fan; later cars an electric fan switched from the radiator, and that switch is the system's known weak point, covered again in the problem areas. Radiators silt up, water pumps weep from their bearings, and the thermostat housing and its hoses are old on every car you will view. The test is simple and the same for all engines: from cold, the temperature should rise steadily, settle, and stay settled in traffic with the fan cutting in and out. A car that creeps upward at idle, or whose heater blows cold at tickover and hot at speed, is telling you about coolant circulation โ pump, thermostat or a partially blocked radiator โ and each is a priced job rather than a mystery. What you must never accept is a car that has been run hot repeatedly: the alloy head forgives once, not as a habit.

Gearboxes
The five-speed manual was standard from the first car in 1966, when five speeds in a small roadster was close to science fiction, and it remains one of the Spider's best features: a light, precise change with well-chosen ratios. The box is durable but has known wear points at classic age. Second-gear synchromesh goes first โ a crunch on a fast change into second, worst when cold, is the standard presentation, and a gearbox rebuild runs roughly $1,200โ2,500 at a specialist. A whine that follows road speed rather than engine speed points to bearings; a rattle at idle in neutral that vanishes when the clutch is pressed is usually the release bearing or layshaft wear and is priced accordingly. The clutch itself is conventional, hydraulically operated on later cars and by cable on early ones, and a replacement is a $700โ1,200 job fitted. Check the gear lever for slop: the linkage bushes wear and make a good box feel vague, and the bush kit is trivial money โ one of the cheapest transformations in classic motoring.
The automatic, offered on the Spider 2000 from 1979, is a three-speed General Motors unit โ sturdy, simple and completely at odds with the twin-cam's character, since it blunts the engine's willingness to rev. It accounts for four of our 23 listings, and those cars sell to buyers who want the shape without the work. Judge it as you would any old automatic: fluid that is red and sweet-smelling, shifts that are firm rather than flaring, and no long delay engaging drive or reverse. A rebuild is generic-automatic money, roughly $1,500โ2,500, and any competent transmission shop knows the unit โ the one place where the Spider's Italian-ness costs you nothing.
Problem areas
The Spider's mechanicals are tough, well understood and cheap to fix by classic standards. Its body is none of those things. This is a unitary-construction Italian car of the sixties and seventies, built with minimal rust protection by the standards of any era, and sold in large numbers into the American Northeast and Midwest. Everything in this section follows from that. Assume any car you view has rust somewhere until your own inspection proves otherwise, and spend your scepticism in the order below: structure first, engine second, cosmetics last. A Spider with a tired engine and a sound shell is a good buy at the right price. A Spider with a sweet engine and a rotten shell is a parts car wearing a price tag.
Rust: the map
Work through the shell in this order, because the first items are structural and the rest are negotiable.
The front crossmember. The Spider's most famous rust trap, and the first place to look on any car. The engine sits on a bolt-in crossmember that also carries the front suspension, and it rots from inside its box sections โ the lower faces and the ends where it bolts to the chassis legs go first. A perforated crossmember is not immediately fatal because the member unbolts and new ones are reproduced, but the job is an engine-support-out exercise at $800โ1,800 fitted, and crossmember rust is never alone: it tells you the whole front structure has been wet for years. While you are there, check the chassis legs it bolts to and the inner wings above them. Legs can be repaired with fabrication; a car rotten in legs, crossmember and towers together is a shell to walk away from.
Front shock towers and spring pans. The front suspension's loads feed into the turrets in the inner wings, and the spring pans at their bases trap mud against the metal. Perforation around the tower tops or soft metal at the pan is structural rust in the truest sense โ it is where the car's geometry lives. Repairs are specialist welding, priced per car, and they are the second commonest reason a cheap Spider is cheap.
Sills. The rocker panels are structural on this unitary shell and rot from the inside out, fed by water entering at the front wheelarch and by blocked drains. Press hard along their full length, look at the jacking points, and distrust fresh black underseal and shiny new sill covers fitted for the sale. A sill replaced properly โ cut out, inner structure repaired, welded and painted โ runs roughly $800โ1,800 per side, and the inners are usually worse than the outers you can see. Bubbling at the rear of the sill where it meets the rear arch is the classic first sign.
Floor pans. Water gets in past the windscreen seal, the top seals and the door seals, and sits under the carpets and the sound-deadening, which holds it against the floor. Lift the carpets in both footwells and prod: surface rust is a weekend job, perforation is a welding job, and floor rust at the seat-belt mounting points and seat runners is a safety item, not a cosmetic one. Replacement floor pans are available and a side fitted and painted runs roughly $600โ1,400 โ but floors, like crossmembers, are a marker for the whole shell's condition. Check also the rear seat area and the panel over the axle.
The rear structure. The rear suspension's trailing arms and coil springs mount to the body, and the spring seats and the floor around the mounts rust quietly where nobody looks. Get under the back of the car with a torch and prod around every mount; a spring seat that has parted from the floor is a fabrication repair. The boot floor rots too, helped by a leak at the boot seal and โ a Spider speciality โ by the battery, which lives in the boot on these cars: acid weep from an old battery eats the floor beneath its tray, invisibly until the battery comes out. Lift it. The spare wheel well corners hold water as well.
The smaller traps. Door bottoms (drain holes block, the door fills, the skin bubbles from inside โ run a fingertip along every door's lower edge), the windscreen frame (rust here both leaks and, at the extreme, threatens the screen itself), the scuttle below the windscreen, the rear valance, the edges of the boot lid and bonnet, and the headlamp bowls. None alone kills a car; together they price the bodywork honestly. One figure to hold in mind: a full professional repaint on a Spider starts around $6,000โ9,000 once trim is off and minor repairs are in, which is why the mantra of this guide is to buy the shell and fix the mechanics.
Reading previous repairs. Most Spiders at this age have been welded, and the quality of old repairs matters as much as the rust that remains. The bad pattern is the patch plate: a piece of steel welded over rot rather than cut back to sound metal, sealed at the edges and undersealed, which rusts on happily underneath and fails twice as fast the second time. Look for plates whose edges you can feel under the underseal, welds that sit on top of flaking metal, and filler doing structural work in sills and arch lips โ the magnet from the inspection section finds all of it. The good pattern is documented: invoices from a known specialist, photographs of the work in progress, and repair sections let in flush. A car with photographed, invoiced structural work by a reputable shop is not a repaired car to discount; on this model it is often the soundest car in the market, because the work has already been paid for by somebody else.

The twin-cam in old age: engine and fuel system
The engine's failure modes are few, known and mostly the wages of neglect.
Overheating and the head gasket. An alloy head on an iron block tolerates no abuse, and the cooling system has one weak link: the electric fan on later cars is switched by a thermoswitch in the radiator that fails with age, silently. A car that runs cool on the road and boils in traffic is describing that switch, not a head gasket โ yet. Repeated overheating warps the head and takes the gasket with it: the signs are coolant loss with no visible leak, mayonnaise under the oil filler cap, bubbles in the header tank and a misfire on a cold start that clears. A head-gasket job with a skim is roughly $900โ1,600; a cracked or badly warped head is a replacement-head conversation. On any viewing, run the car to full temperature and confirm the fan cuts in.
Timing belt history. Covered in the engines section, repeated here because it is the commonest catastrophic failure: no dated belt invoice, no negotiation โ you are buying the belt job and pricing the risk until it is done.
The fuel system on stored cars. Spiders sit, and sitting wrecks fuel systems. The steel tank rusts internally, and the debris migrates: blocked filters, a whining or seized electric pump on injected cars, a carburettor full of varnish and rust dust on carburettor cars. Ethanol in modern fuel attacks the old rubber hoses, which crack and weep โ a fire risk on a car whose fuel lines run where they do. A car recommissioned after storage wants the tank inspected or replaced ($300โ600 for a tank), every rubber fuel hose renewed, filters changed and the carburettor or injectors cleaned before it is judged as a runner; budget $800โ2,000 for a proper fuel-system recommissioning at a shop, and treat a car that "just needs the carb cleaned" as a car whose whole system needs doing.
Ignition. Points ignition on the early cars is simple and drifts out of adjustment; electronic ignition on later cars is reliable but its modules fail with heat and age. A misfire that arrives hot and vanishes cold is ignition until proved otherwise. Many cars have been converted to electronic ignition with a modern distributor or a points-replacement module โ a good modification when documented, and no deduction when done well.
Suspension, steering and brakes
The front suspension is double wishbones with coil springs; the rear is a live axle on coil springs, located by trailing arms and a Panhard rod โ a good layout that made the Spider handle sweetly when new. At classic age the enemies are perished rubber and worn joints. Front ball joints and track-rod ends wear and give clonks over bumps and vagueness at speed; a full front-end refresh of joints, bushes and dampers is roughly $800โ1,600 in parts and labour and transforms the car. Rear axle bushes โ the trailing-arm and Panhard-rod bushes โ perish and let the axle steer the car under power; the symptom is a car that changes line when you lift off in a corner. Dampers are conventional and cheap. None of this is frightening; all of it is routinely deferred, so a car with invoices for suspension work is worth more than its paint suggests.
The steering, on all but the last Pininfarina cars, is a recirculating-ball box. Some play at the straight-ahead is normal; excessive play is usually the box's adjustment or wear, but check the idler arm and the centre track rod first, because they are cheaper. A box rebuild or exchange unit is specialist money, roughly $600โ1,200. While the front is in the air, rock each wheel for bearing play and ball-joint wear, and look again at those crossmember and tower mountings โ suspension and structure are the same inspection on this car.
Brakes are discs all round with a servo on later cars, and the parts are cheap; what costs money is undoing years of sitting. The rear calipers incorporate the handbrake mechanism and seize in both functions โ a handbrake that barely holds on a Spider is usually the calipers, not the cable. A full hydraulic refresh โ calipers rebuilt or exchanged, hoses, master cylinder as needed, fluid โ runs roughly $800โ1,800 fitted. There is also a rear brake pressure regulator in the system whose seizure gives a car that locks its rear wheels or, conversely, does all its stopping at the front; test braking hard from speed on the test drive and insist the car stops straight and evenly.
Electrics, the top and the interior
Fiat electrics of this era have a reputation they only half deserve. The wiring itself is adequate; the failures are at the connections โ earth points that corrode, fuseboxes whose contacts tire (the early cars use ceramic torpedo fuses that lose tension and cause maddening intermittents), and switches that wear. Dim lights, a lazy wiper, an intermittent fuel gauge and a starter that clicks on a hot day are almost always connections and earths: cheap in parts, tedious in tracing. The alternator and starter are conventional and exchange units are available. A car where every electrical item works โ lights, wipers on both speeds, heater fan, washers, instruments, interior light โ has been used and maintained, which is the best general sign there is. Budget $300โ800 for a specialist to sort a typical car's electrical niggles properly rather than by wiggling wires.
The folding top is one of the best designs of its era: a proper lined hood on a frame that one person can raise from the seat. What ages is the material โ vinyl or canvas hoods split at the folds, the plastic rear window yellows and cracks, and the frame's pivots wear so the hood sits crooked. A new hood fitted runs roughly $900โ1,800 depending on material, and fitting is a known art; a car with a recent, well-fitted hood has had real money spent. Check the seals at the windscreen header and the side windows, because top leaks are what fill the floors described above. The tonneau and boot cover are trim, not weather equipment.
Inside, the seats lose their foam and split at the seams โ the driver's seat first, at the entry bolster โ and seat kits are available, with a retrim of both seats at roughly $800โ1,500 in vinyl. Early cars carry a wood-faced dashboard panel and a wood-rimmed wheel that crack and delaminate; later dashboards crack in the sun across the top pad. Door cards warp with damp โ which is itself a clue about the door's drains and the car's storage. Carpets that are damp or smell of mildew are not a cleaning issue; they are the floor inspection announcing itself. Interior trim for the early cars is the hardest parts category on the car, so an early Spider with a complete, original cabin carries a premium it has earned.
How to inspect one
Allow an hour, bring a torch, a cloth-wrapped magnet and a screwdriver for prodding (with the seller's permission), and arrange the viewing so the engine is stone cold when you arrive. On this car the order matters: structure before engine, engine before cosmetics, because the walk-away faults are all in the first half of the list.

- Paperwork and identity first. Match the VIN on the title to the plate in the engine bay and the stamping on the shell. Ask for invoices โ on this model a dated timing-belt invoice and any welding invoices are the two documents that move the price most. A thick history file on a Spider is worth real money because the failure modes are all documented-maintenance issues.
- Cold start. From stone cold, the car should start promptly โ instantly on an injected car, with a brief fast idle that settles. Watch for blue smoke at start-up (valve stem seals or worse) and listen for top-end rattle. A car the seller has warmed up for you is a car whose cold behaviour you are not being shown; note it and price accordingly.
- The crossmember. Get down at the front with the torch. The bolt-in engine crossmember from the rust section is the single most important check on the car: prod its lower faces and ends, check the chassis legs it bolts to, and look up at the shock towers and spring pans. Perforation in the legs or towers is structural and ends most negotiations; a rotten crossmember alone is a priced job, not a walk-away.
- Sills and jacking points. Press hard along both sills, examine the jacking points, and feel for filler with the magnet. Bubbling at the rear of the sill by the arch is the early warning; softness anywhere is the late one. If the seller allows, the car taking its own weight cleanly on its jack at each point settles the question.
- Floors, inside and out. Lift the carpets in both footwells and behind the seats. Prod the pans, the seat-runner mountings and the seat-belt anchor points. Then get under the car โ or better, pay for a lift inspection โ and read the underside whole: floor seams, rear spring seats, trailing-arm mounts, the boot floor from below. Fresh uniform underseal over everything is a question, not an answer.
- The boot. Lift the spare wheel and look in the well corners. Then lift the battery out of its tray and inspect the floor beneath it for acid damage โ the Spider-specific check from the rust section, and one sellers rarely anticipate.
- Body and gaps. Walk the car with the magnet: arches, door bottoms, the lower front wings, the rear valance. Feel along every door's bottom edge for bubbling. Check the windscreen frame for rust and lifting rubber, count the trim items missing or broken, and look down each flank for ripples that say accident or filler.
- Under the bonnet. Check the oil for mayonnaise and the coolant for oil. Look for the cam-box weeps (normal) versus leaks onto the exhaust (not). Ask when the timing belt was done and look for the invoice; no invoice means the job is yours. Inspect every rubber fuel hose for cracking โ on a carburettor car especially โ and on an injected car listen to the fuel pump for the whine that means tank debris.
- Heat and electrics. Run the engine to full temperature. The cooling fan must cut in โ the thermoswitch test from the problem areas โ and the temperature must stabilise. Then work everything electrical: lights, wipers on both speeds, heater fan, washers, horn, every gauge, the interior light. Note each failure; together they describe how the car has been kept.
- The top. Raise and lower the hood yourself. It should move freely with one hand from the seat and latch evenly at the header rail. Inspect the material at the folds, the rear window's clarity, and the seals. Then look at the floors again with fresh eyes: a leaking top is how they got wet.
- The test drive. Fifteen minutes minimum, including a fast road. The manual gearbox should change cleanly; test second gear, cold behaviour now warm, for the synchromesh crunch from the gearbox section. The engine should pull cleanly to 4,500 rpm โ flat spots mean carburation or unmetered air, depending on the car. Brake hard from speed: straight, even, no judder, and a handbrake that holds on a slope. Feel for the rear axle steering the car on lift-off, which prices the rear bushes.
- Stance and interior last. Stand back: level, even, arches at equal heights. Then sit in the driver's seat โ not the passenger's โ and judge the foam, the bolster and the dash from where you will live with them. A sound original interior on an early car is the hardest thing to replace, so weight it heavily; on a late car it is a priced kit, so weight the shell instead.
Values
The market block beneath this guide carries the current numbers โ what is listed now, at what asking prices, and what recorded sales show. This section teaches you how to read them, because the Spider's market is defined less by model year than by three spreads that recur in every listing set, including ours.
The first is the condition spread, and it is wider on this car than on almost any rival. Our current listings run from long-parked projects to presented drivers, and the distance between a Spider that needs a shell's worth of welding and one that has been maintained in use is not a percentage โ it is a multiple. The mechanism is the one the problem areas describe: the mechanical work on this car is cheap and bounded, the structural work is neither, so value concentrates entirely in the shell and the history file. When you compare two asking prices that look far apart for similar-looking cars, the difference is almost always floors, sills and crossmember, whether or not the sellers say so.
The second spread is specification. Within the Fiat-badged years that dominate our listings, the premiums attach, in order, to the early chrome-bumper cars in honest condition, to the injected Spider 2000s, and to documented originality anywhere in the range. The emissions-era carburettor cars โ the mid-to-late seventies 1800s and the 1979โ80 carburettor 2000s โ sit at the value end, not because they are bad cars but because their performance was tuned away when new and recovering it costs money. Automatics trade at a discount to manuals in like condition, because most buyers want the five-speed the car was designed around. Red, the colour of nine of our 23 listings, neither adds nor subtracts; unusual original colours in good order attract their own small following. Beyond our listings, the Pininfarina-built cars and the Volumex sit in a different, thinner market where individual condition and provenance matter more than any guide figure.
The third spread is asking versus achieved. These are, in our data, entirely private Marketplace sales, where asking prices are opening positions and the cars that sit are usually the cars whose sellers have priced the photograph rather than the underside. A fairly priced sound car sells; an overpriced one accumulates months and then often changes hands quietly for much less. As a buyer, your leverage is knowledge: the seller of a Spider with no belt invoice, tired second-gear synchromesh and soft sills is competing against every other project in the listings, and there are always several. As a cross-check on any individual car, price the work the inspection found โ belt, welding, hydraulics โ and offer the asking price minus the honest cost of the list. There is no such thing as a cheap Spider that stays cheap, but there is such a thing as a fairly bought one, and it is always the car whose faults were found before the money moved.
Parts and ownership
The Spider is one of the best-supported Italian classics you can own, for a structural reason: Fiat built the 124 family in the millions, the Spider shares its mechanical core with the 124 saloon and coupรฉ and much with the X1/9, and a dedicated specialist trade has served the model continuously in the United States. Suppliers such as Auto Ricambi, Vick Autosports, Midwest-Bayless and Centerline stock the car in depth, and between them there is very little mechanical you cannot order today and fit this weekend.
Easy: everything service-related โ filters, plugs, belts including the timing belt and tensioner, hoses, water pumps, thermostats and fan switches; brake discs, pads, calipers and hydraulics; suspension joints, bushes and dampers; clutch kits; exhaust systems; carburettor rebuild kits and the common Weber upgrades; injection service parts including pumps, filters and airflow meters on exchange; soft-top hoods in vinyl and canvas; seat kits and carpet sets. Prices are close to modern-car money for most of it, and the work is within reach of a competent home mechanic โ the twin-cam's shim adjustment and the timing belt are the two jobs where a specialist's experience earns its fee.
Harder and dearer: body panels are reproduced for the common rot spots โ floor pans, sills and the front crossmember among them โ which keeps structural repair feasible, but early-car trim is the scarcity: chrome details, badges, the wood dashboard facings and early interior fittings for the AS and BS cars are hunted used parts. Turbo conversion hardware and Volumex supercharger drive parts are specialist-and-patience items. Good used steering boxes are getting scarcer. None of this stops you using the car; it argues for buying the complete car rather than the incomplete one, because the missing trim on a cheap early car can cost more to source than the car saved you.
Running costs. A sorted Spider is a realistic regular-use classic: fuel consumption in the mid-to-high twenties per gallon on a run, insurance in line with other classics of its value, and servicing any good Fiat or Italian-car specialist can handle โ the owner's clubs and forums (Fiat Club America and the model's long-running online communities) hold deep collective knowledge and are worth joining before you buy, not after. The budget line that catches new owners is the same as on every classic: the first year. Catching up deferred maintenance on a running car โ belt, hoses, brakes, fluids, the electrical niggles โ honestly runs $1,500โ4,000 before you improve anything, and recommissioning a long-stored car runs more. Buy a car in current use over a car that has been asleep, even at a higher price; on this model the premium for a maintained car is almost always smaller than the recommissioning bill for the sleeper.

Which one to buy
- The all-rounder: Spider 2000 with fuel injection (1981โ82). The developed car with the usable engine โ instant starting, clean running, the full two-litre character without the carburettor's moods. This is where most of the market is, and it is the right default for a buyer who wants to drive rather than tinker.
- The purist's car: Spider 1600 (1970โ73). Chrome bumpers, the keenest carburettor engine, the lightest shell. Buy on body and interior completeness, accept the weakest trim support in the range, and check the front structure twice โ these cars have had fifty years to rust.
- The value buy: a sound 1800 (1974โ78). The cheapest route into a good Spider, because the market prices the emissions-era performance rather than the car. A solid example with documented maintenance โ or with the common carburettor and exhaust improvements already fitted and invoiced โ gives you most of the experience for the least money.
- The collector car: Pininfarina Azzurra / SpiderEuropa, ideally a 1985ยฝ. The finale of the line: injected, best trimmed, and in the last cars fitted with rack-and-pinion steering. None is in our current listings; when one appears, buy provenance and originality, and verify it is a genuine Pininfarina-built car and not a rebadged Fiat.
- The brave buy: Spider 2000 Turbo. A genuine period curiosity with real performance. Only with the conversion hardware complete and documented โ a car missing its turbo parts is a carburettor-era project wearing a rare badge.
- The automatic: buy it only if you specifically want it. The GM three-speed is sturdy and the cars are cheaper, but it dulls the engine that is half the reason to own a Spider, and the discount follows you when you sell.
And the rule that overrides all of the above: buy the least rusty car you can find, in the specification you can live with. Engines, gearboxes, brakes, hoods and interiors are all fixable at prices you can plan for, from parts you can order this week. A rotten shell โ crossmember, towers, sills and floors gone together โ costs more to put right than the finished car will be worth, and it is the one thing about a Fiat 124 Spider that can never be made original again.
See the 23 124 Spider cars currently listed.
