1988 Mazda FC RX-7
$18,944 SOLD
48 photos of this car.
Details
| Year | 1988 |
|---|---|
| Model | FC RX-7 |
| Series | RX-7 |
| Chassis | JM1FC3311J0605525 |
| VIN | JM1FC3311J0605525 |
| Mileage | No Odometer - TMU |
| Colour (as listed by seller) | Brilliant Black |
| Interior colour | Gray |
| Transmission | 5-Speed |
| Condition | THIS... is a 1988 Mazda RX-7 GTU turbo build, finished in Brilliant Black with a gray interior. - This RX-7's factory-fitted 1.3-liter naturally aspirated 13B rotary engine has been swapped with a custom-built 1.3-liter turbocharged 13B rotary engine. - This RX-7 is offered with a clean `Carfax` vehicle history report. - Notable modifications reported by the seller are extensive, and the full list is detailed below. Highlights include a street-ported S4 turbo engine with S4 NA side housings, a BNR turbocharger, Haltech Elite 1500 engine management, a PowerTune Digital Dash with GPS speedometer, a custom low V-mount intercooler setup, Fortune Auto coilovers, and 17-inch staggered-width Volk Racing Evolution III wheels. - A partial list of notable equipment reported by the seller includes pop-up headlights and manual windows. - Introduced in 1985, the second-generation RX-7 represented a quantum leap for Mazda's signature rotary-engine sports car. Though roughly the same size as the SA22C/FB, the FC was far more sophisticated, replacing its predecessor's solid rear axle and recirculating-ball steering with a multilink setup, passive rear-wheel steering, and a rack-and-pinion, while gaining standard four-wheel disc brakes across the board. Production ended in 1992. - Power comes from a 1.3-liter turbocharged twin-rotor Wankel rotary engine. Output is sent to the rear wheels via a |
| Seller | Auction seller |
| Listed by | Cars & Bids |
| Location | Longmont, CO |
About this car
Sold on Cars & Bids on October 14, 2026 for $18,944. The car is in Longmont, CO. The full gallery and listing details come from the car's own auction page.
More about this car
THIS... is a 1988 Mazda RX-7 GTU turbo build, finished in Brilliant Black with a gray interior. - This RX-7's factory-fitted 1.3-liter naturally aspirated 13B rotary engine has been swapped with a custom-built 1.3-liter turbocharged 13B rotary engine. - This RX-7 is offered with a clean `Carfax` vehicle history report. - Notable modifications reported by the seller are extensive, and the full list is detailed below. Highlights include a street-ported S4 turbo engine with S4 NA side housings, a BNR turbocharger, Haltech Elite 1500 engine management, a PowerTune Digital Dash with GPS speedometer, a custom low V-mount intercooler setup, Fortune Auto coilovers, and 17-inch staggered-width Volk Racing Evolution III wheels. - A partial list of notable equipment reported by the seller includes pop-up headlights and manual windows. - Introduced in 1985, the second-generation RX-7 represented a quantum leap for Mazda's signature rotary-engine sports car. Though roughly the same size as the SA22C/FB, the FC was far more sophisticated, replacing its predecessor's solid rear axle and recirculating-ball steering with a multilink setup, passive rear-wheel steering, and a rack-and-pinion, while gaining standard four-wheel disc brakes across the board. Production ended in 1992. - Power comes from a 1.3-liter turbocharged twin-rotor Wankel rotary engine. Output is sent to the rear wheels via a 5-speed manual transmission.






























































